Canon printer imageCLASS MF4370dn User Manual

Before Using the Machine
1-14
  Entering  Characters    
En te rin g C hara cte rsEntering Characters
For displays that require alphanumeric entries, follow the procedure below to enter 
characters.
Example: Enter . For details on entering characters, see “Information About the 
Keys,” in the Starter Guide or “Setting Up the Machine,” in the e-Manual.
  
 1 
Press  repeatedly until an uppercase 
 appears. 
 C NAME             [A] 
 2 
Press [] to move the cursor to the 
right, then press 
 until an...

Before Using the Machine
1-15
  Telephone  Line  Settings   
    Te le p hon e L in e S ettin gsTelephone Line Settings
Set the type of telephone line that is connected to the machine.
If this setting is incorrect, you will be unable to communicate with other machines. Make 
sure to check the type of telephone line that you are using, and make the correct setting. 
The default setting is 
 
 1 
Press  [Menu]. 
  
 2 
Press [] or [] to select , then press [OK]. 
 5  FAX SETTINGS MENU 
 3 
Press [] or []...

Before Using the Machine
1-16
  Timer  Settings    
    Tim er S ettin gsTimer Settings
The timer settings enables you to set the Sleep Mode and the Daylight Saving Time.
  
    Settin g t h e S le ep  M od e Setting the Sleep Mode 
 If the machine remains idle for a certain period of 
time, it automatically enters the Sleep mode. 
  
 The default settings are as follows: 
 : ON 
 : 5MIN. 
 1 
Press  [Menu]. 
  
 2 
Press [] or [] to select , then press [OK]. 
 8  TIMER SETTINGS MENU 
 3 
Press [] or []...

Before Using the Machine
1-17
Timer Settings
        Settin g t h e D ay lig ht S av in g T im e Setting the Daylight Saving Time 
 In some countries or areas, time is advanced 
throughout the summer season. This is called 
“Daylight Saving Time.” This section describes how 
to set the Daylight Saving Time. 
 The default setting is . 
 1 
Press  [Menu]. 
  
 2 
Press [] or [] to select , then press [OK]. 
 8  TIMER SETTINGS MENU 
 3 
Press [] or [] to select , then press [OK]. 
 4  DAYLIGHT SV.TIME...

Before Using the Machine
1-18
Timer Settings
  1313
 Press [] or [] to select , 
then press [OK]. 
 1  MONTH END DATE/TIME 
  1 414
 Press [] or [] to select the month, 
then press [OK]. 
             NOVEMBER MONTH 
  1 515
 Press [] or [] to select , 
then press [OK]. 
 2  WEEK
END DATE/TIME 
  1 616
 Press [] or [] to select the week, 
then press [OK]. 
          SECOND WEEK
WEEK 
  1 717
 Press [] or [] to select , then 
press [OK]. 
 3  DAY
END DATE/TIME 
  1 818
 Press [] or [] to select the day,...

Documents and Print Media 
2
 
  Documents 
and Print 
Media  
 
 This chapter describes the types of paper and documents that can be used with the machine and how to load paper 
in the paper cassette and the multi-purpose tray.
 
Documents Requirements .......................................... 2-2
Scanning Area .............................................................. 2-3
Placing Documents ...................................................... 2-4
On the Platen Glass...

Documents and Print Media 
2-2
  Documents  Requirements  
          Docu m en ts  R eq uir e m en ts  Documents Requirements 
Platen Glass ADF
Type Plain paper Thick documents
Photographs
Small documents (e.g., index cards)
Special types of paper (e.g., tracing 
paper*
1, transparencies*1, etc.)
Books (Height: Maximum 1" (24 mm))
–
–
–
–
–
– Plain paper (Multi-page documents of the 
same size, thickness and weight or one-page 
documents.)
Size (W × L) Maximum 8 1/2" × 11 5/8" (Maximum 216 ×...

Documents and Print Media 
2-3
  Scanning  Area  
            Sca n nin g A re a Scanning Area 
 Make sure your document's text and graphics fall within the shaded area in the following 
diagram. Note that the margin widths listed are approximate and there may be slight 
variations in actual use. 


 

Documents and Print Media 
2-4
  Placing  Documents   
      Pla cin g D ocu m en tsPlacing Documents
This section describes how to place your documents on the platen glass and in the ADF.
 
 O n t h e P la te n  G la ss  On the Platen Glass 
 1 
Lift up the ADF. 
  
 2 
Place a document face down. 
  
 3 
Align the document with the appropriate 
paper size marks. 
  
 If your document does not match any of the 
paper size marks, align the center of your 
document with the arrow mark.  

Documents and Print Media 
2-5
Placing Documents
 4 
Gently lower the ADF. 
  
 The document is ready for scanning. 
When closing the ADF, be careful not to get 
your fingers caught, as this may result in 
personal injury.
Do not press down the ADF forcefully, as this 
may damage the platen glass and cause 
personal injury.
–
–
Remove the document from the platen glass 
when scanning is complete.
  I
n  t h e A D F 
   In  the  ADF  
 1 
Fan the documents stack and even the 
edges. 
  
 2 
Adjust the...