Canon printer imageCLASS D530 User Manual
Here you can view all the pages of manual Canon printer imageCLASS D530 User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 21
21 Basic Operation5 Close the front cover and the lower front cover. 6 Specify the loaded paper size and type (→p.23). Loading Paper in the Multi-Purpose Tray 1 Open the front cover and the lower front cover. 2 Push down and lower the multi-purpose tray. 3 Spread the paper guides a little wider than the paper. 4 Gently load the paper into the multi-purpose tray with the print side face up, and adjust the paper guides tightly to the width of the paper. 5 Specify the loaded paper size and type...
Page 22
22 Loading Envelopes or Paper with a Letterhead This section describes how to load envelopes and paper with a letterhead. Envelopes Loading Orientation Load the paper properly by following the instructions below. 1-sided printing Load the paper with the printed side face up.2-sided printing Load the paper with the printed side face down. When printing with portrait layout When printing with landscape layout When printing with portrait layout When printing with landscape layout #$ If < Print...
Page 23
![Page 23
23
Basic Operation Setting a Paper Size and Type
Make sure that the Paper Settings match the size and the type of the loaded paper.
1 Press [ ] (Paper Settings).
2 Press [▲] or [▼] to highlight or , and then press
[OK].
3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK].
•
To specify the paper size manually, select < Custom Size>, and then refer to
“Specify a Paper Size Manually” at the bottom of this page to specify the size.
Paper Size
LTR
LGL
STMT
EXEC
4 Press [▲]...](http://img.usermanuals.tech/thumb/14/940/w300_printer-imageclass-d530-1478269561_d-22.png "Page 23
23
Basic Operation Setting a Paper Size and Type
Make sure that the Paper Settings match the size and the type of the loaded paper.
1 Press [ ] (Paper Settings).
2 Press [▲] or [▼] to highlight or , and then press
[OK].
3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK].
•
To specify the paper size manually, select < Custom Size>, and then refer to
“Specify a Paper Size Manually” at the bottom of this page to specify the size.
Paper Size
LTR
LGL
STMT
EXEC
4 Press [▲]...")
23 Basic Operation Setting a Paper Size and Type Make sure that the Paper Settings match the size and the type of the loaded paper. 1 Press [ ] (Paper Settings). 2 Press [▲] or [▼] to highlight or , and then press [OK]. 3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK]. • To specify the paper size manually, select < Custom Size>, and then refer to “Specify a Paper Size Manually” at the bottom of this page to specify the size. Paper Size LTR LGL STMT EXEC 4 Press [▲]...
Page 24
![Page 24
24
Switch to the Quiet Mode
You can switch to and cancel the Quiet mode, by pressing [ ] (Quiet Mode).
• By default, the Quiet mode is set to . To change this setting to < On>,
and specify the time to switch to the Quiet mode automatically, press
[
] (Menu) ,
and then specify a time.
• When the Quiet mode is On, the processing speed of functions becomes
slower.
• The Quiet mode cannot be used with some paper sizes or types.
• The Special mode has higher priority than the Quiet mode.
•...](http://img.usermanuals.tech/thumb/14/940/w300_printer-imageclass-d530-1478269561_d-23.png "Page 24
24
Switch to the Quiet Mode
You can switch to and cancel the Quiet mode, by pressing [ ] (Quiet Mode).
• By default, the Quiet mode is set to . To change this setting to < On>,
and specify the time to switch to the Quiet mode automatically, press
[
] (Menu) ,
and then specify a time.
• When the Quiet mode is On, the processing speed of functions becomes
slower.
• The Quiet mode cannot be used with some paper sizes or types.
• The Special mode has higher priority than the Quiet mode.
•...")
24 Switch to the Quiet Mode You can switch to and cancel the Quiet mode, by pressing [ ] (Quiet Mode). • By default, the Quiet mode is set to . To change this setting to < On>, and specify the time to switch to the Quiet mode automatically, press [ ] (Menu) , and then specify a time. • When the Quiet mode is On, the processing speed of functions becomes slower. • The Quiet mode cannot be used with some paper sizes or types. • The Special mode has higher priority than the Quiet mode. •...
Page 25
![Page 25
25
Basic OperationUse the Toner Saver Mode
You can set whether or not to conserve toner when copying. When using the Toner Saver
mode, the output may not be clear, as subtle details, such as thin lines and light colors, may
not be clearly reproduced.
1 Press [ ] (Menu).
2 Press [▲] or [▼] to highlight , and then press [OK].
3 Press [▲] or [▼] to highlight , and then press [OK].
Preferences
Display Settings
Toner Saver Mode
Paper Feed Method Sw
...
4 Press [▲] or [▼] to highlight , and then press...](http://img.usermanuals.tech/thumb/14/940/w300_printer-imageclass-d530-1478269561_d-24.png "Page 25
25
Basic OperationUse the Toner Saver Mode
You can set whether or not to conserve toner when copying. When using the Toner Saver
mode, the output may not be clear, as subtle details, such as thin lines and light colors, may
not be clearly reproduced.
1 Press [ ] (Menu).
2 Press [▲] or [▼] to highlight , and then press [OK].
3 Press [▲] or [▼] to highlight , and then press [OK].
Preferences
Display Settings
Toner Saver Mode
Paper Feed Method Sw
...
4 Press [▲] or [▼] to highlight , and then press...")
25 Basic OperationUse the Toner Saver Mode You can set whether or not to conserve toner when copying. When using the Toner Saver mode, the output may not be clear, as subtle details, such as thin lines and light colors, may not be clearly reproduced. 1 Press [ ] (Menu). 2 Press [▲] or [▼] to highlight , and then press [OK]. 3 Press [▲] or [▼] to highlight , and then press [OK]. Preferences Display Settings Toner Saver Mode Paper Feed Method Sw ... 4 Press [▲] or [▼] to highlight , and then press...
Page 26
2626 Memo
Page 27
![Page 27
27
Make a Basic Copy ………………………………………………\
…… 28
Enlarge or Reduce Copies …………………………………………… 29
Adjust the Image Quality for Copy …………………………………… 29Adjusting the density ………………………………………………\
29
Select i
ng the Document Type ……………………………………… 30
Adjusting the sharpness …………………………………………… 30
Make Double-Sided Copies ………………………………………… 31
C op
y Mu
ltiple Pages onto One Sheet ……………………………… 32
Collate Copies ………………………………………………\
………… 32
Copy a Double-Sided ID Card ………………………………………… 33
View and Cancel Copy Jobs...](http://img.usermanuals.tech/thumb/14/940/w300_printer-imageclass-d530-1478269561_d-26.png "Page 27
27
Make a Basic Copy ………………………………………………\
…… 28
Enlarge or Reduce Copies …………………………………………… 29
Adjust the Image Quality for Copy …………………………………… 29Adjusting the density ………………………………………………\
29
Select i
ng the Document Type ……………………………………… 30
Adjusting the sharpness …………………………………………… 30
Make Double-Sided Copies ………………………………………… 31
C op
y Mu
ltiple Pages onto One Sheet ……………………………… 32
Collate Copies ………………………………………………\
………… 32
Copy a Double-Sided ID Card ………………………………………… 33
View and Cancel Copy Jobs...")
27 Make a Basic Copy ………………………………………………\ …… 28 Enlarge or Reduce Copies …………………………………………… 29 Adjust the Image Quality for Copy …………………………………… 29Adjusting the density ………………………………………………\ 29 Select i ng the Document Type ……………………………………… 30 Adjusting the sharpness …………………………………………… 30 Make Double-Sided Copies ………………………………………… 31 C op y Mu ltiple Pages onto One Sheet ……………………………… 32 Collate Copies ………………………………………………\ ………… 32 Copy a Double-Sided ID Card ………………………………………… 33 View and Cancel Copy Jobs...
Page 28
![Page 28
28
Make a Basic Copy
1 Place your documents (→p.16).
* D530 is not equipped with the feeder.
IMPORTANTIMPORTANTIf the document guides are too loose or too tight, this may result in
misfeeds or paper jams.
2 Switch to the Copy mode (→p.13).
3 Enter the desired copy quantity (1 to 99) with the alphanumeric keys.•
Press [ ] (Clear) to delete the entered copy quantity.
Copy: Press Start
100% LTR
Density: 0
Original Type: Text
. ..
2-Sided: Off
1
+
-
01
4 Press [ ] (Start).
Canceling Copy...](http://img.usermanuals.tech/thumb/14/940/w300_printer-imageclass-d530-1478269561_d-27.png "Page 28
28
Make a Basic Copy
1 Place your documents (→p.16).
* D530 is not equipped with the feeder.
IMPORTANTIMPORTANTIf the document guides are too loose or too tight, this may result in
misfeeds or paper jams.
2 Switch to the Copy mode (→p.13).
3 Enter the desired copy quantity (1 to 99) with the alphanumeric keys.•
Press [ ] (Clear) to delete the entered copy quantity.
Copy: Press Start
100% LTR
Density: 0
Original Type: Text
. ..
2-Sided: Off
1
+
-
01
4 Press [ ] (Start).
Canceling Copy...")
28 Make a Basic Copy 1 Place your documents (→p.16). * D530 is not equipped with the feeder. IMPORTANTIMPORTANTIf the document guides are too loose or too tight, this may result in misfeeds or paper jams. 2 Switch to the Copy mode (→p.13). 3 Enter the desired copy quantity (1 to 99) with the alphanumeric keys.• Press [ ] (Clear) to delete the entered copy quantity. Copy: Press Start 100% LTR Density: 0 Original Type: Text . .. 2-Sided: Off 1 + - 01 4 Press [ ] (Start). Canceling Copy...
Page 29
![Page 29
29
Copy
Enlarge or Reduce Copies
Enlarge or reduce copies using preset copy ratios or custom copy ratios.
1 Place your documents (→p.16).
2 Switch to the Copy mode (→p.13).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [▲] or [▼] to highlight the desired ratio, and then press [OK].
•
If you want to set a copy ratio in 1% increments, select < Custom Ratio>, and then
enter the copy ratio using the numeric keys or press [
▲] or [▼] to specify the ratio.
Copy Ratio
Custom Ratio...](http://img.usermanuals.tech/thumb/14/940/w300_printer-imageclass-d530-1478269561_d-28.png "Page 29
29
Copy
Enlarge or Reduce Copies
Enlarge or reduce copies using preset copy ratios or custom copy ratios.
1 Place your documents (→p.16).
2 Switch to the Copy mode (→p.13).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [▲] or [▼] to highlight the desired ratio, and then press [OK].
•
If you want to set a copy ratio in 1% increments, select < Custom Ratio>, and then
enter the copy ratio using the numeric keys or press [
▲] or [▼] to specify the ratio.
Copy Ratio
Custom Ratio...")
29 Copy Enlarge or Reduce Copies Enlarge or reduce copies using preset copy ratios or custom copy ratios. 1 Place your documents (→p.16). 2 Switch to the Copy mode (→p.13). 3 Press [▲] or [▼] to highlight , and then press [OK]. 4 Press [▲] or [▼] to highlight the desired ratio, and then press [OK]. • If you want to set a copy ratio in 1% increments, select < Custom Ratio>, and then enter the copy ratio using the numeric keys or press [ ▲] or [▼] to specify the ratio. Copy Ratio Custom Ratio...
Page 30
![Page 30
30
Selecting the Document Type
Select the appropriate document type.
1 Place your documents (→p.16).
2 Switch to the Copy mode (→ p.13).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [▲] or [▼] to highlight the appropriate document type, and then
press [OK].
Best suited for text-only documents.
Suitable for documents that contain text and photos.
(Scan
n
ed documents are at a low resolution at high
speed.)
Suitable for documents that contain text and photos.
Suitable for...](http://img.usermanuals.tech/thumb/14/940/w300_printer-imageclass-d530-1478269561_d-29.png "Page 30
30
Selecting the Document Type
Select the appropriate document type.
1 Place your documents (→p.16).
2 Switch to the Copy mode (→ p.13).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [▲] or [▼] to highlight the appropriate document type, and then
press [OK].
Best suited for text-only documents.
Suitable for documents that contain text and photos.
(Scan
n
ed documents are at a low resolution at high
speed.)
Suitable for documents that contain text and photos.
Suitable for...")
30 Selecting the Document Type Select the appropriate document type. 1 Place your documents (→p.16). 2 Switch to the Copy mode (→ p.13). 3 Press [▲] or [▼] to highlight , and then press [OK]. 4 Press [▲] or [▼] to highlight the appropriate document type, and then press [OK]. Best suited for text-only documents. Suitable for documents that contain text and photos. (Scan n ed documents are at a low resolution at high speed.) Suitable for documents that contain text and photos. Suitable for...