Canon printer FAXPHONE L80 User Manual

Chapter 10 Copying10-1
Copying
Chapter 10
Copying
This chapter describes how to make copies with your machine.
Documents You Can Copy.....................................................................10-2
Making Copies........................................................................................10-2 

10-2Copying Chapter 10
Documents You Can Copy
For information on the types of documents you can copy, their requirements, and details
on loading documents, see Chapter 4.
Making Copies
Follow this procedure to make copies:
1Adjust the paper delivery selector if
necessary (1
p. 5-7).
2Load the document, face down in the 
ADF (1
p. 4-3).
•To adjust the contrast, see p. 7-3.(Currently used memory)
(Standby to scan)
3Press Start/Copy.
4Press Image Qualityrepeatedly until 
the resolution setting you want is...

Chapter 10 Copying10-3
Copying
6If you want to make multiple copies, 
use the numeric buttons to enter the
number of copies.
•You can make up to 99 copies.
n
The machine copies at 400 ×300
dpi for single copies, and at 200 
×
300 dpi for multiple copies. For
best quality output, make one copy
at a time.
7Press Start/Copyto begin copying.
•To cancel copying, press Stop/Reset.
You may then need to open the
operation panel to remove the document
from the ADF (1
p.13-2).
n
You will be unable to make multiple...

10-4Copying Chapter 10 

Chapter 11 Reports and Lists11-1
Reports and Lists
Chapter 11
Reports and Lists
This chapter describes the different reports and lists you can print from your machine.
You will find samples of some of these reports and instructions for printing.
Summary of Reports and Lists.............................................................11-2
ACTIVITY REPORT.................................................................................11-3
TX (Transmission)...

11-2Reports and Lists Chapter 11
Summary of Reports and Lists
The table below shows the lists and reports that can be printed from your machine.
Refer to the pages indicated for more details.
Report or List
USER’S DATA LIST
ACTIVITY REPORT
TX (Transmission) REPORT
RX (Reception) REPORT
MULTI TX/RX (Transaction)
REPORT
DOC. MEMORY LIST
MEMORY CLEAR REPORT
1-TOUCH SPD DIAL LIST 1
1-TOUCH SPD DIAL LIST 2
CODED SPEED DIAL LIST 1
CODED SPEED DIAL LIST 2
GROUP DIAL LIST
Description
Lists the current settings...

Chapter 11 Reports and Lists11-3
Reports and Lists
ACTIVITY REPORT
The machine is factory-set to automatically print an ACTIVITY REPORT after every 20
transactions. If you want to print an ACTIVITY REPORT before it is automatically
printed, follow this procedure:
1Press Function.
2Press Report.
3Press Set.
•The machine prints an ACTIVITY
REPORT.
Transactions in an ACTIVITY REPORT are listed chronologically.
Sending transactions are numbered between 0001 and 4999, and receiving
transactions are numbered...

11-4Reports and Lists Chapter 11
TX (Transmission) REPORT
The machine is factory-set to print a TX (transmission) REPORT only when an error
occurs during sending. To change this setting, see 
TX REPORT, p. 14-5.
If you set your machine to print a report, a TX REPORT or an ERROR TX REPORT
similar to the ones below, will be printed depending on the setting you select.
TRANSMISSION OK
TX/RX NO 0003
CONNECTION TEL  1 432 2060
SUBADDRESS
CONNECTION ID Canon OPTICS
ST. TIME 27/12 14:52
USAGE T 00’34
PGS. SENT...

Chapter 11 Reports and Lists11-5
Reports and Lists
MULTI TX/RX (Transaction) REPORT
A MULTI TX/RX (transaction) REPORT similar to the one below, is printed when you
send the same document to several fax numbers, or when you poll multiple fax
numbers in one operation.
RX (Reception) REPORT
The machine is factory-set not to print an RX (reception) REPORT even if an error
occurs during reception. To change this setting, see 
RX REPORT, p. 14-5.
If you set your machine to print a report, an RX REPORT similar...

11-6Reports and Lists Chapter 11