Canon printer Color imageCLASS MF9280Cdn User Manual

Settings from a PC
10-2
Overview of Remote UI

Overview of Remote UI
Remote UI enables you to check the machine’s status and manage the machine’s functions 
from a computer on the network using a web browser. Using the computer keyboard, the 
management process, such as entering addresses to the address book will be easier. 

Settings from a PC
10-3
Overview of Remote UI
Checking the Device 
Information from a computer
The Remote UI enables you to check 
the device information. Accessing to 
the device information from the 
distant place provides you with easy 
device management.
For details, see “Checking Device 
Status and Information” in the 
e-Manual.
Managing jobs from a 
computer
The Remote UI enables you to manage 
print jobs and view job logs. 
Accessing to the print job information 
from the distant place provides...

Settings from a PC
10-4
Starting the Remote UI

Starting the Remote UI
To start the Remote UI, follow the procedure described below.
1 
Prepare the Network.
Set up the machine for use in a network, then 
connect the machine and the computer to your 
network router or a hub.
For details, see “Setup Computers and Software,” 
in the Starter Guide.
2 
Start the web browser. 
3 
Enter the IP address of the machine in 
[Address] or [Location], then press [Enter] 
on the keyboard.
For details on how to check...

Settings from a PC
10-5
Starting the Remote UI

② For System Manager Mode enter the 
System Manager ID and the Password, and 
click OK. For End-User Mode, enter the User 
Name and click OK.
■ For Department ID Management mode:
① 
Enter the Department ID and Password, and 
click OK.
■ For User Management mode:
① 
Enter the User ID and Password, and click 
OK.
If no password is set, you can log on without entering a password. 

Settings from a PC
10-6
Starting the Remote UI
5 
Operate the Machine.
Now you can manage the machine on the web 
browser.
For details, see “Settings from a PC,” in the 
e-Manual.
For details on the Remote UI settings, see Online Help. 

Maintenance

This chapter describes how to perform routine cleaning operations, and replace toner cartridges.
Maintenance
Chapter
11
Cleaning the Machine ...............................................11-2
Exterior  ........................................................................\
.........11-2
Interior  ........................................................................\
..........11-3
Scanning Area  ....................................................................11-4
Replacing the...

11-2
Cleaning the Machine
Maintenance

Cleaning the Machine
Note the following before cleaning your machine:
Make sure no documents are stored in memory when you turn OFF the main power switch 
and disconnect the power cord.
Use a soft cloth to avoid scratching the components.
Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to 
the components or generate static charges.
Never use volatile liquids such as thinner, benzene, acetone, or any other chemical cleaner to...

11-3
Cleaning the Machine
Maintenance

Interior
Clean the machine’s print area periodically to prevent toner powder and paper dust from accumulating inside.
Cleanng the Fxng Unt
If black streaks appear on printed output, the fixing unit may be dirty. Also, you should use the Fixing Unit 
Cleaning procedure every time the toner cartridge is replaced. Print the cleaning pattern on LTR paper for 
cleaning the fixing unit.
 As cleaning paper, LTR or A4 paper must be loaded in the paper...

11-4
Cleaning the Machine
Maintenance

5 
Confirm that  is 
displayed, then press [OK].
Printing starts.
Discard the cleaning paper after use.
The cleaning process cannot be canceled. Please wait until it is completed.
6 
Press  (Main Menu) to return to the 
Main Menu screen.
Scanning Area
Keep the scanning area clean to avoid dirty copies or faxes to be sent.
Cleanng the Platen Glass
Clean the platen glass and the underside of the feeder by following the procedure below.
●
1 
Open the feeder.
2...

11-5
Cleaning the Machine
Maintenance

3 
Close the feeder.
Cleanng the Feeder Automatcally
If your originals have black streaks or appear dirty after scanning them through the feeder, clean the rollers of 
the feeder.
●
Use LTR or A4 paper as cleaning paper.It takes approximately 30 seconds to clean the feeder.
1 
Press  (Main Menu).
2 
Press the right Any key to select 
.
––3 
Use [▼], [▲], or  (Scroll Wheel) to 
select , then 
press [OK].
4 
Use [▼], [▲], or  (Scroll Wheel) to 
select ,...