Canon printer Color imageCLASS MF8350Cdn User Manual

							
2-15
Document and Paper Handling
 Manual feed slot (MF8050Cn only) 
  
 Portrait layout   Landscape layout  
1-sided 
printing
  
 (with the printing side facing up) 
  
 (with the printing side facing up)  
 Printing on Envelopes 
 Load envelopes with the front side (non-glued side) facing up 
as follows.
 (
: Feeding direction)  
  
 Paper  cassette 
 Envelope Monarch*, No.10, DL, ISO-C5 
 Load the envelopes so that the fl ap is toward the left of the paper cassette 
when they are viewed from the front. 
 
Close the flap and load
the envelope.
 
*  You can load Envelope Monarch in the paper cassette only for  MF8050Cn.
 Envelope  B5 
 Load the envelopes so that the flap is toward the back of the paper 
cassette when they are viewed from the front. 
 
Close the flap and load
the envelope.
 
 The multi-purpose tray (MF8350Cdn Only) 
 Envelope  COM10 
 Load the envelopes so that the flap is toward the left of the machine 
when it is viewed from the front. 
 
Close the flap and load
the envelope. 
  
 Envelope  B5 
 Load the envelopes so that the flap is toward the back of the machine 
when it is viewed from the front. 
 
Close the flap and load
the envelope. 
 Manual feed slot (MF8050Cn Only) 
 Envelope  COM10 
 Load the envelopes so that the flap is toward the left of the machine 
when it is viewed from the front. 
 
Close the flap and load
the envelope. 
 Envelope  B5 
 Load the envelopes so that the flap is toward the back of the machine 
when it is viewed from the front.  
Close the flap and load
the envelope. 
   
						

							
2-16
Document and Paper Handling
  



 Setting a  Paper Size and Type Follow the procedure in this section to adjust the paper 
size and type settings for the cassette and the tray.
    IMPORTANT 
   If the setting is diff
 erent from the size of the loaded paper, an error 
message appears, or printing is not performed correctly. 
   For  the  Paper  Cassette 
 
ResetSelect Paper/Settings
OK
Keys to be used for this operation
 
  1   Press [] (Select Paper/Settings). 
  2    Select  with [] or [], and 
then press [OK]. 
 
Select Paper MP Tray
LTR:Plain 2
LTR:Plain 2
Paper Settings
1
2
 
  3   Select  or  with [] or [], 
and then press [OK]. 
 
Paper Settings Multi-Purpose Tray
Drawer 1
Drawer 2
Register Custom Paper
 
  4    Select a paper size with [] or [], and then 
press [OK]. 
*  When registering the custom paper, see  "Registering a Custom 
Paper Size" ( →
P.2-17) .
*  The registered custom paper is listed at the top. Select it with [
].
 
Paper Size LT R
LGL
STMT
EXEC
 
  
  5    Select a paper type with [] or [], and then 
press [OK]. 
 
Paper Type Plain 2 (19 lb Bond-
Recycled
Color
Heavy 1 (24 lb Bond...
 
  6   Press [] (Reset) to return to standby mode. 
  
   Registering the Default Paper Settings for 
the Multi-purpose Tray (Manual Feed Slot) 
 If you want to always load the same paper in the multi-purpose 
tray (manual feed slot), register the default paper using the 
following procedure. 
     NOTE  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\
 - -  
 If the default paper is registered 
   The setting screen is not displayed when paper is loaded. 
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\
 - - - - - - - -  
 
ResetSelect Paper/SettingsNumeric keys
OK
Keys to be used for this operation
 
  1   Press [] (Select Paper/Settings). 
  2    Select  with [] or [], and 
then press [OK]. 
 
Select Paper MP Tray
LTR:Plain 2
LTR:Plain 2
Paper Settings
1
2
 
  3    Select  with [] or [], 
and then press [OK]. 
 
Paper Settings Multi-Purpose Tray
Drawer 1
Drawer 2
Register Custom Paper
  
						

							
2-17
Document and Paper Handling
  4    Select  with [] or [], and then press [OK]. 
 
Register Default Set.Off
On
Settings
 
  5    Select  with [] or [], and 
then press [OK]. 
 
Select Paper LTR:Plain 2
LTR:Plain 2
LTR:Plain 2
Paper Settings
1
2
 
  6    Select  with [] or [], 
and then press [OK]. 
 
Paper Settings Multi-Purpose Tray
Drawer 1
Drawer 2
Register Custom Paper
 
  7    Select  with [] or [], and then 
press [OK]. 
 
Register Default Set. Off
On
Settings
 
  8    Select a paper size with [] or [], and then 
press [OK]. 
*  When registering the custom paper, see  "Registering a Custom 
Paper Size" ( →
P.2-17) .
*  The registered custom paper is listed at the top. Select it with [
].
 
Paper Size LT R
LGL
STMT
EXEC
 
 If you select  
 Specifi  es the size of  direction and  direction of the 
custom paper. 
 (1)  Select the direction with [] or [], and then press [OK]. 
  
Specify Size 
X:0"
Y: 0 "
X
Y
 
 (2)  Specify the size with [
] or [], and then press [OK]. 
  You can also enter values using the numeric keys. 
  
Set Length for X
3_1/8 "
(3-8_1/2) 
 (3)  Select  with [
] or [], and then press [OK]. 
  
Specify Size 
X: 3_1/8 "
Y: 5_1/16 "
X
Y
 
  9    Select the paper type with [] or [], and then 
press [OK]. 
 
Paper Type Plain 2 (19 lb Bond-
Recycled
Color
Heavy 1 (24 lb Bond...
 
  10  Press [] (Reset) to return to standby mode. 
  
   Registering a Custom Paper Size 
You can register sizes and types of frequently used paper.
Registered paper is displayed when paper settings are specifi  ed 
for each paper source. Paper cassette
Paper size setting screen
Paper Size1. 7x9"
LT R
LGL
STMT
  "For the Paper Cassette" ( →
P.2-16) 
Multi-purpose tray (manual feed slot) When  is set to  (default)
The screen to be displayed when paper is loaded in the 
multi-purpose tray (manual feed slot)
Paper Size (MP Tray) 1. 7x9"
LT R
LGL
STMT
•
•
- 
						

							
2-18
Document and Paper Handling
When  is set to 
Paper size setting screen
Paper Size1. 7x9"
LT R
LGL
STMT
  "Registering the Default Paper Settings for the Multi-purpose Tray 
(Manual Feed Slot)" ( →
P.2-16) 
 
ResetSelect Paper/SettingsNumeric keys
OK
Keys to be used for this operation
 
  1   Press [] (Select Paper/Settings). 
  2    Select  with [] or [], and 
then press [OK].  
 
Select Paper MP Tray
LTR:Plain 2
LTR:Plain 2
Paper Settings
1
2
 
  3    Select  with [] or 
[
], and then press [OK]. 
 
Paper Settings Multi-Purpose Tray
Drawer 1
Drawer 2
Register Custom Paper
 
  4    Select  with [] or [], and 
then press [OK]. 
 When selecting the registered custom paper, you can edit and 
delete the custom paper. 
 
Register Custom Paper 1. Not Registered
2. Not Registered
3. Not Registered
 
-  5   Specifi   es the size of  direction and  
direction. 
 (1)  Select the direction with [] or [], and then press [OK]. 
  
Specify Size 
X:0"
Y:0"
X
Y
 
 (2)  Specify the size with [
] or [], and then press [OK]. 
   You can also enter values using the numeric keys. 
  
Set Length for X
3_1/8 "
(3-8_1/2) 
 (3)  Select  with [
] or [], and then press [OK]. 
  
Specify Size 
X: 3_1/8 "
Y: 5_1/16 "
X
Y
 
    6    Select the paper type with [] or [], and then 
press [OK]. 
 
Paper Type Plain 2 (19 lb Bond-
Recycled
Color
Heavy 1 (24 lb Bond...
 
  7   Press [] (Reset) to return to standby mode.  
						

							
2-19
Document and Paper Handling



4FMFDUJOH
1SJOU
4JEF
	.$EO
0OMZ

You can specify whether to match the sides to be printed for 
2-sided printing and 1-sided printing.
Depending on the setting for this item, the side to be printed 
changes. When using previously printed paper, read  "Paper 
Loading Orientation" (→
P.2-14)  thoroughly to load the paper in 
the proper orientation.
When setting this item to  (the default setting)
Because the sides to be printed for 2-sided printing and 
1-sided printing are diff   erent, the printing sides do not match.
* When using previously printed paper, you need to switch the  sides of loaded paper between 2-sided printing and 1-sided 
printing.
øùúû
øùúû1-sidedprinting
2-sided printing Front Back
Specify the setting in the following cases.
When not using previously printed paper
When performing only 1-sided printing on previously 
printed paper
When setting this item to 
The sides to be printed for 2-sided printing and 1-sided 
printing match.
* Even when using previously printed paper, you do not need to switch the sides of loaded paper between 2-sided printing 
and 1-sided printing.
øùúû
øùúû1-sidedprinting
2-sided printing Front Back
Specify the setting in the following case.
When performing 2-sided printing and 1-sided printing on 
previously printed paper
 
OK
Men
u
Keys to be used for this operation
 
•
•
•
  1   Press [] (Menu). 
  2    Select  with [] or [], and 
then press [OK]. 
 
Menu Sound Volume Control
Common Settings
Copy Settings
Memory Media Settin
...
 
  3   Select  with [] or 
[
], and then press [OK]. 
 
Common Settings Inch Entry
Gram/Pound Swich
Drawer Auto-Selecti...
Paper Feed Method Sw
 
  4    Select the paper source to specify with [] or 
[
], and then press [OK]. 
 is displayed only when the optional paper cassette 
(Cassette 2) is installed in MF8350Cdn.
 
Paper Feed Method Multi-Purpose Tray
Drawer 1
Drawer 2
 
  5    Select  or  with [
] or [], and then press [OK]. 
 
Multi-Purpose TrayPrint Speed Priority
Print Side Priority
 
 When specifying , load paper as 
follows.
(
: Feeding direction)
*  For details on the procedure for loading paper when  using multi-purpose tray or when printing pages of the 
landscape layout, see  "Paper Loading Orientation" ( →
P.2-14) .
When performing 1-sided 
printing When performing 2-sided 
printing
Load paper with the printing 
side facing up.
Load paper with the front side 
(fi rst page) facing down. 
						

							
2-20
Document and Paper Handling
When specifying , load paper as 
follows.
(
: Feeding direction)
*  For details on the procedure for loading paper when  using multi-purpose tray or when printing pages of the 
landscape layout, see  "Paper Loading Orientation" ( →
P.2-14) .
The procedure for loading paper is the same for 2-sided 
printing and 1-sided printing.
When performing 1-sided printing, load paper with the 
printing side facing down.
When performing 2-sided printing, load paper with the 
front side (fi rst page) facing down.
•
•
6 Press [] (Menu) to close the menu screen.
   
						

							
Chapter
 3
3-1
 This category describes the copying features. 
Basic Copying Method
 3-2
Canceling Copy Jobs  3-2
Copy Settings  3-3
 Selecting Copy Papers  3-3
 Adjusting the Density  3-3
 Selecting Image Quality (Copy)  3-4
2-Sided Copying 
(MF8350Cdn Only)  3-4
 Enlarging/Reducing Copies  3-5
 Multiple Documents onto One Sheet (N on 1)   3-5
 Collating Copies  3-6
 Erase Dark Borders and Frame Lines (Frame Erase)   3-6
 Emphasize the Outline of an Image (Sharpness)   3-6
Copying the ID Card  3-7
Changing the Default Values  3-8
    Copying   
						

							
3-2
Copying
Copy: Press Start
100% LTRDensity: 0
Original Type: Text/Ph
2
-Sided: Off
1+-
1
...
 Basic Copying Method                
  1
   Place documents on the platen glass or load 
them in the feeder. 
    "Placing Documents" ( →
P.2-4) 
 
   "Documents Requirements" ( →
P.2-2) 
*  Up to 50 documents can be loaded in the feeder. The 51st and  subsequent documents are not scanned.
  2
   Press []. 
  3
   Specify the copy settings as needed. 
 You can specify up to 9 items. 
 (for details, see  P.3-3  to  P.3-6 .) 
 
    Paper select 
  
  Density 
  
  Image quality 
  
  2-Sided 
  
  Enlarged/reduced    
  Reduced layout 
  
  Collating 
  
  Frame erase 
  
  Sharpness 
 
  4
    Use numeric keys to enter the desired copy 
quantity (1 to 99).  
  5
  Press [] (Color) or [] (B & W).  
 -  For color copy 
    Press  [
] (Color).
 -  For black and white copy, 
    press  [
] (B & W ).
  Canceling  Copy  Jobs 
 You can cancel scanning or ongoing jobs in the following 
procedure. 
  1
  Press [] (Stop). 
    2   When multiple jobs are being processed, select  the jobs to be canceled with [
] or [], and 
then press [OK]. 
  3   When the  message appears, select   with [
], and then press [OK].  
 Copy jobs are canceled.  
 The settings that are specifi ed here apply only to copy 
operation which you are currently performing. To apply the 
valid settings for all copy operations, see  "Changing the 
Default Values" ( →
P.3-8) . 
This section describes the basic procedure for copying. 
						

							
3-3
Copying
      Adjusting the  Density 
 Copy mode screen 
Copy: Press Start
100% LTRDensity: 0
Original Type: Text...
2-Sided: Off
1
+-
1
 
 Copy  Settings                          
      Selecting Copy Papers 
Copy mode screen   Setting screen* 
 
Copy: Press Start
100% LTR
Density: 0
Original Type: Text...
2-Sided: Off
1
+-
1
 
Select Paper
LGL:Plain 2
LTR:Plain 2
LTR:Plain 2
1
2
 
 Select the paper cassette with [] or [] →
 [OK]
Adjusting the color
Setting screen*
Density-+
Background: Default
Color Balance: Defaul
Select  with [] or []
 
Select a color for which you want to 
adjust the color balance with 
[] or []
Color Balance 
Ye l l o w : 0
Magenta: 0
Cyan: 0
+-
+
-
+ -
 
Adjust the color balance with [] or 
[
]
Ye l l o w
0
(-8 - +8)
[] Makes the color lighter.
[] Makes the color darker.
 
Select [Apply] with [] or [] →
 [OK]
O
To  n e x t  p a g e
*  You can display the setting 
screen also by selecting 
 in the copy mode 
screen.
Density adjustment
Setting screen*
Density-+
Background: Default
Color Balance: Defau...
  
 Adjust the density with [] or []  →
 [OK] 
O
 []   Makes the copy 
density lighter. 
 [
]   Makes the copy 
density darker. 
Background Adjustment
Setting screen*
Density-+
Background: Default
Color Balance: Defau...
Select  with 
[
] or []
 
Select  with 
[
] or []
Background Off
Fine Adjustment
 Does not adjust the 
background density.
Adjusts the background 
density.
 The next step
 
O
Adjust the density with 
[
] or []  →
 [OK]
Fine Adjustment
-+
Adjust by Color
[] Makes the background 
density lighter. 
[
] Makes the background 
density darker.
If adjusting the density for each color
(1)  Select [Adjust by Color] with 
[ 
 ] or [  ] →
 [OK]
Fine Adjustment
-+
Adjust by Color
(2)  Select the color you want to adjust the 
density with [
] or [] →
 [OK]
(3) A djust the density with [
] or [] →
 
[OK] [
] Makes the background color 
density lighter.
[
] To make the background color 
density darker.
 (4) Select [Apply] with [
] or []  →
 [OK]
•
•
*  You can display the setting screen also by selecting 
 in the copy mode screen. 
						

							
3-4
Copying
Copy mode screen  Setting screen*
 
Copy: Press Start
100% LTRDensity: 0
Original Type: Text...
2-Sided: Off
1
+-
1
  
Original Type
Text/Photo/Map
Text/Photo/Map: (Qua...
Printed Image
Text
   Select the appropriate settings for the document with  [
] or [], and then press [OK] 
When selecting 
 Adjust the priority with [] or [] →
 [OK] 
  
  
High Image Quality Text PriorityPhoto Priority
          Selecting  Image Quality (Copy)   
  Copy  Settings  
          2-Sided  Copying (MF8350Cdn Only) 
 Copy mode screen  Setting screen* 
Copy: Press Start
100% LTR Density: 0
Original Type: Text...
2-Sided: Off
1
+-
1
   
2-Sided
Off
1 2-Sided
Format Settings
  Select  with [] or [] →
 [OK] 
  
   This option is suitable for documents that contain text and photos or 
fi ne diagrams and text such as maps. 
 This option scans the document at a low resolution for color copy. 
   This option is suitable for documents that contain text and photos or 
fi  ne diagrams and text such as maps.  
   This option is suitable for documents that contain text and photos or 
fi ne diagrams and text such as maps. 
 This option scans the document at a high resolution. 
 You can set the image quality priority to text or photos.  
   This option is suitable for documents that contain photos printed in a 
magazine.  
   This option is suitable for documents that contain text without photos 
or illustrations. 
*  You can display the setting  screen also by selecting 
 in the copy 
mode screen.
*  You can display the setting screen also by selecting 
 in the copy mode 
screen.
If you want to specify 2-Sided copying format
 (1)  Select  with [] or [] →
 [OK] 
 (2)  Select the orientation of the document with [
] or []  →
 [OK] 
 
Original Orientation Portrait
Landscape
  (3)  Select the fi nishing format with [
] or [] 
→
 [OK]
Finishing Format
Book Type
Calendar Typ...