Canon printer Color imageCLASS MF8350Cdn User Manual

							
2-5
Document and Paper Handling
  4    Neatly place the documents face up. 
 Load the paper under the load limit guides (A). 
 Make sure that the paper stack does not exceed the load limit 
mark (B). 
 
(A)
(B)
 
  5    Align the document guides with the width of the  document. 
 The machine is ready to scan the document. 
 
 
  
    IMPORTANT 
 Be sure to align the document guides with the width of 
the paper 
   If the document guides are too loose or too tight, this may result in  misfeeds or paper jams.  
 While scanning a document 
   Do not add or remove documents.  
 Scanning documents is complete 
   Remove the documents from the document delivery tray to avoid paper jams.  
 Avoid scanning the same document more than 30 times. 
   When scanned repeatedly, documents can become folded or torn, which may cause paper jams.  
 If the feeder rollers are soiled from scanning a document 
written in pencil 
   Clean the feeder rollers.
 
 e-Manual  →
 Maintenance  →
 Cleaning the Scanning Area      
						

							
2-6
Document and Paper Handling
 Paper  Size 
 The available paper sizes are as follows.   
 
{: Available 
 Paper size    Paper  source   
 Paper cassette *1    Multi-purpose tray  
Manual feed slot
 A4 (8 1/4" x 11 3/4") (210.0 mm x 297.0 mm) *
2 *3   {  
{ 
 B5 (7 1/8" x 10 1/8") (182.0 mm x 257.0 mm) *2     {  
{ 
 A5 (5 7/8" x 8 1/4") (148.0 mm x 210.0 mm)     {  
{ 
 Legal (8 1/2" x 14") (215.9 mm x 355.6 mm)  *
2 
{   
{ 
 Letter (8 1/2" x 11") (215.9 mm x 279.4 mm) *2 *3   {  
{ 
 Statement (5 1/2" x 8 1/2") (139.7 mm x 215.9 mm)     {  
{ 
 Executive (7 1/4" x 10 1/2") (184.0 mm x 266.7 mm)  *
2 
{   
{ 
 Offi     cio (8 1/2" x 12 1/2") (215.9 mm x 317.5 mm)    
{  
{ 
 B-offi     cio (8 1/2" x 14") (215.9 mm x 355.6 mm)    
{  
{ 
 M-offi     cio (8 1/2" x 13 3/8") (215.9 mm x 341 mm)    
{  
{ 
 Government - Letter (8" x 10 1/2") (203.2 mm x 266.7 
mm)     
{
  
{ 
 Government - Legal (8" x 13") (203.2 mm x 330.2 mm)     {  
{ 
 Foolscap (8 1/2" x 13") (215.9 mm x 330.2 mm) *
2     {  
{ 
 Envelope COM10 (4 1/8" x 9 1/2") (104.7 mm x 241.3 
mm)   *
4 
{   
{ 
 Envelope Monarch (3 7/8" x 7 1/2") (98.4 mm x 190.5 
mm)   *
4 
{  *5 
{ 
 Envelope C5 (6 3/8" x 9") (162 mm x 229 mm)  *
4 
{   
{ 
 Envelope B5 (7" x 10") (176 mm x 250 mm)  *4 
{   
{ 
 Envelope DL (4 3/8" x 8 5/8") (110 mm x 220 mm)  *4 
{   
{ 
 Custom Paper Size    {*6  
{*7 
 *1  Only in MF8350Cdn, available in the optional paper feeder  
 *2  Only in MF8350Cdn, auto 2-sided print is available.  
 *3  Received documents, reports, or lists can be printed.  
*4  Use envelopes with the fl  ap closed.
*5  You can load Envelope Monarch in the paper cassette only for MF8050Cn.
 *6  You can load paper of the following custom paper sizes. * MF8350CdnWidth 4" to 8 1/2" (100 to 215.9 mm); Length 5 7/8" to 14" (148 to 355.6 mm)
*  MF8050Cn Width 3" to 8 1/2" (76.2 to 215.9 mm); Length 5" to 14" (127 to 355.6 mm)  
 *
7  You can load paper of the following custom paper sizes. *  Width 3" to 8 1/2" (76.2 to 215.9 mm); Length 5" to 14" (127 to 355.6 mm) 
  
    NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - - - - - - - -   
 Default paper size 
   The default paper size is A4. If you use a diff erent paper size, change the paper size settings. 
  
   "Setting a Paper Size and Type" ( →
P.2-16) 
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - - - - - - - - - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -    
  
   Paper  R equi rements   
						

							
2-7
Document and Paper Handling
 Paper  Type 
 The available paper types are as follows. 
 Paper Type    Printer Driver Setting   Paper Source  
 Paper  Capacity 
 (Paper  Cassette)   Paper  Capacity 
 (Multi-purpose  Tray)    (Manual Feed Slot)
 Plain Paper *
1    16 to 19 lb Bond (60 to 74 
g/m
2)  
 [Plain  1] 
 MF8350Cdn: 250 sheets 
 MF8050Cn: 150 sheets  
•
•  MF8350Cdn: 50 sheets 
 MF8050Cn: 1 sheet  
•
•
 MF8350Cdn:
19 to 24 lb Bond (70 to 
90 g/m
2)  
 MF8050Cn:
20 to 24 lb Bond (75 to 
90 g/m
2  
•
•
 [Plain  2] 
 Heavy Paper *
1
(MF8350Cdn)    24 to 32 lb Bond (86 to 119 
g/m
2)  
 [Heavy 1]  200 sheets  30 sheets 
 32 to 34 lb Bond (120 to 
128 g/m
2)    [Heavy  2] 
150 sheets  20 sheets 
 34 lb Bond to 60 lb Cover 
(129 to 163 g/m
2)    [Heavy 3]  
 Heavy  Paper 
(MF8050Cn)    25 lb Bond to 45 lb Cover 
(91 to 120 g/m
2)  
 [Heavy 1]  120 sheets  1 sheets 
 32 lb Bond to 60 lb Cover 
(121 to 163 g/m
2)    [Heavy 2]   100 sheets 
1 sheets 
 61 to 65 lb Cover (164 to 
176 g/m
2)    [Heavy 3]     
 Recycled Paper *
1    16 to 19 lb Bond (60 to 74 
g/m2)   [Recycled]     MF8350Cdn: 250 sheets 
 MF8050Cn: 150 sheets  
•
•  MF8350Cdn: 50 sheets 
 MF8050Cn: 1 sheet  
•
•
 Color Paper *
1    16 to 19 lb Bond (60 to 74 
g/m2)    [Color]     MF8350Cdn: 250 sheets 
 MF8050Cn: 150 sheets  
•
•  MF8350Cdn: 50 sheets 
 MF8050Cn: 1 sheet  
•
•
 Coated Paper    28 to 29 lb Bond (100 to 
110 g/m
2)  
 [Glossy 1] *2 
 MF8350Cdn: 50 sheets 
 MF8050Cn: 100 sheets  
•
•
 MF8350Cdn: 20 sheets 
 MF8050Cn: 1 sheet  
•
•
 32 to 35 lb Bond (120 to 
130 g/m
2)  
 [Glossy 2] *2  
 40 lb Bond to 60 lb Cover 
(155 to 165 g/m
2)    [Glossy 3] *2  
 77 to 80 lb Cover (210 to 
220 g/m
2)    [Glossy 4]     
 Transparency  *
3    [Transparency]   MF8350Cdn: 50 sheets 
 MF8050Cn: 50 sheets  
•
•  MF8350Cdn: 20 sheets 
 MF8050Cn: 1 sheet  
•
•
 Label     [Labels]   MF8350Cdn: 50 sheets 
 MF8050Cn: 50 sheets  
•
•  MF8350Cdn: 20 sheets 
 MF8050Cn: 1 sheet  
•
•
 Index Card    [Heavy 2]   MF8350Cdn: 50 sheets 
 MF8050Cn: 15 sheets  
•
•  MF8350Cdn: 10 sheets 
 MF8050Cn: 1 sheet  
•
•
 Envelope     [Envelope]   MF8350Cdn: 10 sheets 
 MF8050Cn: 10 sheets  
•
•  MF8350Cdn: 5 sheets 
 MF8050Cn: 1 sheet  
•
•
 *
1  Only in MF8350Cdn, auto 2-sided print is available.  
 *2  Only in MF8350Cdn, auto 2-sided print in A4 or LETTER size is available.  
 *3  Use only the transparencies designed for laser printers. 
 To prevent paper jams, do not use the following types of 
paper. 
 Wrinkled or creased paper 
 Curled or rolled paper 
 Torn  paper 
 Damp  paper 
 Very thin paper 
 Paper printed with a thermal transfer printer (Do not copy on the 
reverse side.) 
 The following types of paper do not print well: 
 Highly textured paper 
 Very smooth paper 
 Glossy  paper 
 Make sure the paper is free from dust, lint, and oil stains. 
 Make sure to test paper before purchasing large quantities. 
 Store all paper wrapped and on a fl   at surface until ready 
for use. Keep opened packs in their original packaging in a 
cool, dry location. 
Store paper at 64.4 to 75.2°F (18 to 24°C), 40 % to 60 % RH. 
•
•
•
•
•
•
•
•
•
  
    CAUTION  
 If you print on damp paper 
 The following problems may occur. 
 Steam is emitted from the printer output area. 
 Water droplets form on the back side of the operation panel and 
in the output area. 
 Because moisture in the paper is evaporating due to the heat 
generated when toner fi xes, this is not a malfunction. ( This is likely to 
occur when the room temperature is low.) 
 If you smell a burnt odor, however, immediately turn OFF the machine, 
unplug the power plug from the AC power outlet, and then contact 
your local authorized Canon dealer or the Canon help line. Continued 
use can result in a fi re or electrical shock.  •
• 
						

							
2-8
Document and Paper Handling
  
1/4 in.
(5 mm) 1/4 in.
(5 mm) 1/4 in.
(5 mm)
1/4 in.
(5 mm)
   Prin table  Ra nge  The shaded area indicates the approximate printable area of A4 paper. Note that the margin 
widths listed below are rough standards and there may be slight variations in actual use. 
						

							
2-9
Document and Paper Handling
    NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - -  
 If you use paper of a diff  erent size or type 
   The default paper size/type is set to  and  in the 
setting menu. If you use a diff  erent paper size or paper type, you need 
to change the paper settings. 
  
  "Setting a Paper Size and Type" ( →
P.2-16)  
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - - - - -  
 In the Paper Cassette 
  Before loading paper in the paper cassette, see  "Precautions 
when Loading Paper" ( →
P.2-13) .  
    NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - -  
 How to load paper in the optional paper cassette (Cassette 2) 
 Load the paper in Cassette 2 in the same manner as you load the 
paper in Cassette 1.  
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - - - - -  
  1    Pull out the paper cassette. 
 Hold the paper cassette with both hands.   
  
  2    Spread the paper guides a little wider than the 
actual paper width. 
 (1)  Slide the side paper guides. 
   Holding the lock release lever, slide the paper guides.  
  The side paper guides move together.  
  The lock release lever is not installed in MF8050Cn.  
 (2)  Slide the paper guide at the front center. 
   Holding the lock release lever, slide the paper guides. 
 MF8350Cdn 
  
(1)
(1)
(2)
(2) 
  
•
O
 MF8050Cn   
  
(1)
(1)
(2)
(2)
 
 When loading Legal size paper 
 Holding the lock release lever at the front right, adjust the length 
of the paper cassette. 
  
 MF8350Cdn 
  
 
 MF8050Cn   
  
 
*  If you want to change the size of the paper to be loaded, be sure  to register the paper size in  "Setting a Paper Size and Type" ( →
P.2-16) .
  3    Load the custom size paper so that the edges of 
the paper stack are aligned with the rear side of 
the paper cassette. 
    "Paper Loading Capacity" ( →
P.2-13) 
 
   "Paper Loading Orientation" ( →
P.2-14) 
 
 
   O
O
O
   L oading  Paper   
						

							
2-10
Document and Paper Handling
 When loading envelopes 
 (1)  Close the envelope fl ap. 
  
 
 (2)  Place the stack of envelopes on a fl at surface, fl atten them  to release any remaining air, and be sure that the edges are 
pressed tightly. 
  
 
 (3)  Loosen any stiff    corners of the envelopes and fl atten curls as 
shown in the fi gure. 
   
 (4)  Align the edges of the envelopes on a fl at surface. 
  
 
 (5)  Load the envelopes into the paper cassette with the print side  up.  
  4    Align the paper guides with the loaded paper. 
 
(1)
(1)
 
 
(2)
(2)
 
  5    Hold down the paper, then set it under the hooks  (A) on the paper guides. 
 Make sure that the paper stack does not exceed the line of the 
load limit mark (B). 
 MF8350Cdn 
  
(A)(A)
(A)
(B)(B)
   
 MF8050Cn   
  
(A)
(B)
(A)
(B)
(A) 
  6    Insert the paper cassette into the machine. 
 Push it into the printer fi rmly. 
When loading Legal size paper
When the paper cassette is inserted with it extended, the front 
side of the paper cassette is not fl ush with the front surface of the 
machine as shown in the fi gure.
  
 
Set the legal dust cover on the paper cassette. O
O 
						

							
2-11
Document and Paper Handling
 MF8350Cdn 
  
 
 MF8050Cn   
  
 
  7    Specify the loaded paper size and type. 
    "Setting a Paper Size and Type" ( →
P.2-16) 
  
 In the Multi-Purpose Tray (for MF8350Cdn) 
  Before loading paper in the multi-purpose tray, see 
 "Precautions when Loading Paper" ( →
P.2-13) .  
 Use the multi-purpose tray when you want to copy or print on 
a paper that is diff   erent from what is in the paper cassette. 
  1    Open the multi-purpose tray. 
 Hold the handle at the center of the tray to open the multi-
purpose tray. 
 
 
    IMPORTANT 
Be sure to insert the paper cassette.
  If the paper cassette is not inserted, you cannot print from the multi- purpose tray.
  2    Pull out the auxiliary tray. 
  
O
O
  3    When loading long-size paper, open the tray 
extension. 
  
  4    Spread the paper guides a little wider than the actual paper width.  
  
  5    Gently insert the paper into the multi-purpose tray with the print side up. 
 Load the paper under the load limit guides (A). 
 Make sure that the paper stack does not exceed the load limit 
mark (B). 
 
   "Paper Loading Capacity" ( →
P.2-13) 
 
   "Paper Loading Orientation" ( →
P.2-14) 
 
(B)
(A)
 
 When loading envelopes 
 (1)  Close the envelope fl ap. 
  
 
•
• 
						

							
2-12
Document and Paper Handling
 (2)  Place the stack of envelopes on a fl at surface. Flatten the envelopes by releasing any remaining air and creasing the 
edges. 
  
 
 (3)  Loosen any stiff    corners of the envelopes and fl atten curls as 
shown in the fi gure. 
  
 
 (4)  Align the edges of the envelopes on a fl at surface. 
  
 
 (5)  Gently insert the paper into the multi-purpose tray with the  print side up.  
  6    Align the paper guides with the width of the paper. 
   
  7    Specify the loaded paper size and type. 
    "Setting a Paper Size and Type" ( →
P.2-16) 
  
 In the Manual Feed Slot  (for MF8050Cn)
  Before loading paper in the manual feed slot, see  "Precautions 
when Loading Paper" ( →
P.2-13) .  
 Use the manual feed slot when you want to copy or print on a 
paper that is diff   erent from what is in the paper cassette. 
  1    Slide the paper guides so they align with the 
width of the loaded paper as shown in the fi  gure. 
 Adjust the paper guides to the size of the paper, then load the 
paper deeply to back of the tray. 
 
 
    IMPORTANT 
Be sure to insert the paper cassette.
  If the paper cassette is not inserted, you cannot print from the manual  feed slot.
  2    Support the paper with your hands as shown in the fi   gure, and insert the paper until it touches 
the back of the tray. 
When the paper touches the back of the tray, it is caught by the 
slot.
 Only one sheet of the paper can be loaded in the manual feed slot. 
 
   "Paper Loading Orientation" ( →
P.2-14) 
 
 
When loading envelopes
Close the envelope fl ap.
 
 
  3    Specify the loaded paper size and type. 
    "Setting a Paper Size and Type" ( →
P.2-16) 
   
						

							
2-13
Document and Paper Handling
   Precautions  when  Loading  Paper 
 
    CAUTION  
 Be careful when handling paper 
 Handle paper carefully not to cut your hands with the edges of the 
paper.  
 Precautions when inserting the paper cassette 
 Be careful not to catch your fi ngers.     
    IMPORTANT 
 Be sure to align the paper guides with the width of the 
paper. 
   If the paper guides are too loose or too tight, this may result in 
misfeeds or paper jams.  
 When using paper that has been poorly cut 
   If you use paper that has been poorly cut, multiple sheets of paper may be fed at once. In this case, fan the paper thoroughly, and then 
align the edges of the stack properly on a hard, fl at surface.  
 Do not exceed the load limit mark when loading paper. 
   Make sure that the paper stack does not exceed the line of the load limit mark. If the paper stack exceeds the load limit mark lines, this 
may result in misfeeds.  
 When printing on envelopes 
   Load envelopes with the front side (non-glued side) facing up. You cannot print on the reverse side of envelopes.  
Also, be sure to close the fl ap before loading envelopes.
 If Index Card is curled 
   Bend it in the opposite direction to fl atten it before loading.  
 
  
    NOTE  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\
 - -  
 Detailed information about usable paper 
    "Paper Requirements" ( →
P.2-6)  
 Size abbreviation on the paper guides of the paper 
cassette 
 Paper size    Paper guide  
 Legal     LGL   
 Letter     LTR   
 Executive     EXEC   
 B5     JIS  B5 
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\
 - - - - - - - -  
  
   Paper  Loading  Capacity 
 MF8350Cdn 
 
(A)
(B)
(C) 
 Paper type    Paper source  
 (A) 
 Multi-purpose  tray   (B) 
 Cassette  1   (C) 
 Cassette  2   (optional)   
 Plain paper (Ex. 21 lb Bond 
(80 g/m
2)   Approx.  50 
sheets   Approx.  250 
sheets   Approx.  250 
sheets  
 Heavy paper (Ex. 25 lb 
Bond (91 g/m
2)   Approx.  30 
sheets   Approx.  200 
sheets   Approx.  200 
sheets  
 Heavy paper (Ex. 34 lb 
Bond (128 g/m
2)   Approx.  20 
sheets   Approx.  150 
sheets   Approx.  150 
sheets  
 Transparency 
 (Transparencies can only 
be printed in black and 
white.)    Approx.  20 
sheets   Approx.  50 
sheets    Approx.  50 
sheets  
 Label     Approx.  20 
sheets    Approx.  50 
sheets    Approx.  50 
sheets  
 Coated  paper   Approx.  20 
sheets    Approx.  50 
sheets    Approx.  50 
sheets  
 Envelope     Approx.  5 
sheets    Approx.  10 
sheets    Approx.  10 
sheets 
  
 MF8050Cn 
 
(A)
(B)
 
 Paper type    Paper source  
 (A) 
 Manual  feed  slot   (B) 
 Cassette 1  
 Plain paper (Ex. 21 lb Bond (80 g/m
2)   1 sheet    Approx.  150 
sheets  
 Heavy paper (Ex. 25 lb Bond (91 g/m
2)   1 sheet    Approx.  120 
sheets  
 Heavy paper (Ex. 34 lb Bond (128 g/m
2)   1 sheet    Approx.  100 
sheets  
 Transparency (black-and-white printing only)    1 sheet    Approx.  50 
sheets  
 Label    1 sheet    Approx.  50 
sheets  
 Coated paper    1 sheet    Approx.  100 
sheets  
 Envelope    1 sheet    Approx.  10 
sheets  
O
O 
						

							
2-14
Document and Paper Handling
   Paper  Loading  Orientation 
 Be sure to load paper in portrait orientation. 
 
O Paper cassette 
  
 
O Multi-purpose tray (MF8350Cdn Only) 
  
 
O 
Manual feed slot (MF8050Cn Only) 
  
 When printing paper with a letterhead or logo (previously printed paper) 
 Load the paper in the proper orientation as follows.   
 Paper  cassette 
  
 Portrait layout   Landscape layout  
1-sided printing
(When  "Selecting 
Print Side 
(MF8350Cdn 
Only)" ( →
P.2-19)   is 
set to  (the 
default setting))
 
 
 (with the printing side 
facing up) 
 
 
 (with the printing side 
facing up)  
1-sided printing
(When  "Selecting 
Print Side 
(MF8350Cdn 
Only)" ( →
P.2-19)   is 
set to )
 
 
 (with the printing side 
facing down) 
 
 
 (with the printing side 
facing down)  
Automatic 2-sided 
printing
(MF8350Cdn only)
 
 
 (with the front side facing 
down) 
 
 
 (with the front side facing 
down)  
 Multi-purpose tray (MF8350Cdn only) 
  
 Portrait layout   Landscape layout  
1-sided printing
(When  "Selecting 
Print Side 
(MF8350Cdn 
Only)" ( →
P.2-19)   is 
set to  (the 
default setting))
 
 
 (with the printing side 
facing up) 
 
 
 (with the printing side 
facing up)  
1-sided printing
(When  "Selecting 
Print Side 
(MF8350Cdn 
Only)" ( →
P.2-19)   is 
set to )
 
 
 (with the printing side 
facing down) 
 
 
 (with the printing side 
facing down)  
Automatic 2-sided 
printing
 
 
 (with the front side facing 
down) 
 
 
 (with the front side facing 
down)