Canon printer Color imageCLASS MF8350Cdn User Manual

							
v
 Manuals for the Machine     
 Read this manual fi rst. 
 This manual describes the settings for 
the machine and software installation. 
Be sure to read this manual before using 
the machine. 
 Starter  Guide 
 Basic Operation Guide 
 e-Manual 
 Read this manual next. 
 This manual describes the basic 
machine operations. 
 Read the desired chapter
to suit your needs. 
 The e-Manual is categorized by subject to 
fi nd desired information easily. 
  
 
 
  
 Preface 
 Installing the Machine 
 Confi guring and Connecting the Fax 
 Connecting to a Computer and Installing the Drivers 
 Appendix •
•
•
•
•
 Before Using the Machine 
 Document and Paper Handling 
 Copying 
 Printing from a Computer 
 Registering  Destinations 
in the Address Book 
 Using the Fax Functions •
•
•
•
•
•
 Basic  Operation 
 Copy 
 Fax 
 Print 
 Scan 
 Network  Settings 
 Security •
•
•
•
•
•
• Setting and Managing from 
Computer   Troubleshooting 
 Maintenance 
 Setting Menu List 
 Specifi  cations •
•
•
•
•
 Using the Scan Functions 
 Maintenance 
 Troubleshooting 
 Registering/Setting  the  Various 
Functions 
 Appendix •
•
•
•
•
 The e-Manual is included in the User Software CD-ROM. 
*
 This  manual  
						

							
vi
 Symbols Used in This Manual 
    WARNING  Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To 
use the machine safely, always pay attention to these warnings. 
    CAUTION  Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the 
machine safely, always pay attention to these cautions. 
    IMPORTANT  Indicates operational requirements and restrictions. Be  sure to read these items carefully to operate the machine 
correctly, and avoid damage to the machine or property. 
    NOTE  Indicates a clarifi  cation of an operation, or contains additional explana tions for a procedure. Reading these notes is 
highly recommended. 
 Keys and Buttons Used in This Manual 
 The following symbols and key names are a few examples of how keys to be pressed are expressed in this manual. 
 Operation panel keys: [Key icon] + (Key name) 
Example: [
] (Stop) 
 Display:  
 Buttons and items on the computer display: [Preferences] 
 Illustrations Used in This Manual 
 Illustrations used in this manual 
 Illustrations of the model MF8350Cdn are used in this manual. When there is any diff   erence among the machines, 
it is clearly indicated in the text, e.g., "For MF8050Cn." 
 For information on the standard features for each model, see the followings. 
     "Available  Features"  ( →
P.vi) 
  
 The display used in this manual 
 The display used in this manual is the factory preset display for the MF8350Cdn. Depending on the system confi  guration and product purchased, 
the appearance of the display may diff  er. 
•
•
•
 The available features are introduced for each model.  
 
{: available 
 -:  not  available 
 Copy   Print   2-sided Printing  Fax (PC Fax)    USB Scan    Network Scan    Remote UI    ADF (1-sided)    ADF (2-sided)  
 MF8350Cdn    {  
{ 
{  
{  
{  
{  
{  
{  - 
 MF8050Cn    {  
{  -  
{  
{  
{  
{  
{  - 
   Available  Features    
 How to Use This Manual  
						

							
vii
  Please read these "Important Safety Instructions" thoroughly before operating the machine.
As these instructions are intended to prevent injury to the user and other persons or to prevent destruction of property, always pay 
attention to these instructions and operational requirements.
Also, as it may result in unexpected accidents or injuries, do not perform any operation unless otherwise specifi  ed in the manual. 
Important Safety Instructions
  Installation 
     WARNING     
 Do not install the machine in a location near alcohol, paint 
thinner, or other fl ammable substances. If fl  ammable sub-
stances come into contact with electrical parts inside the 
machine, this may result in a fi  re or electrical shock. 
  Do not place the following items on the machine.    Necklaces and other metal objects  
 Cups, vases, fl  owerpots, and other containers fi  lled with 
water or liquids 
 If these items come into contact with a high-voltage area in-
side the machine, this may result in a fi  re or electrical shock.  
 If these items are dropped or spilled inside the machine, 
immediately turn off    the power switches of the machine and 
computer (1) and disconnect the interface cable if it is con-
nected (2). Then, unplug the power plug from the AC power 
outlet (3) and contact your local authorized Canon dealer.  


(1)
(1)
(2)
(2)
(3)




(1)
(1)
(2)
(2)
(3)


  When installing and removing the optional accessories, be 
sure to turn the machine off   , unplug the power plug, and 
then disconnect all the interface cables and power cord from 
the machine. Otherwise, the power cord or interface cables 
may be damaged, resulting in a fi  re or electrical shock.  
    CAUTION 
  Do not install the machine in unstable locations, such as on 
unsteady platforms or inclined fl oors, or in locations subject 
to excessive vibrations, as this may cause the machine to fall 
or tip over, resulting in personal injury.   
  The ventilation slots are provided for proper ventilation of 
working parts inside the machine. Never place the machine 
on a soft surface, such as a bed, sofa, or rug. Blocking the 
slots can cause the machine to overheat, resulting in a fi  re.  
  Do not install the machine in the following locations, as this 
may result in a fi  re or electrical shock.  
 A damp or dusty location 
•
•
-
-
•
•
•
• -
 A location exposed to smoke and steam, such as near a 
cookery or humidifi  er 
 A location exposed to rain or snow  
 A location near a water faucet or water  
 A location exposed to direct sunlight  
 A location subject to high temperatures  
 A location near open fl  ames 
 When installing the machine, gently lower the machine to 
the installation site so as not to catch your hands between 
the machine and the fl  oor or between the machine and 
other equipment, as this may result in personal injury.  
 When connecting the interface cable, connect it properly by 
following the instructions in this manual. If not connected 
properly, this may result in malfunction or electrical shock. 
 When moving the machine, follow the instructions in this 
manual to hold it correctly. Failure to do so may cause you to 
drop the machine, resulting in personal injury. 
   “Transporting the Machine” ( →P.8-13) 
  Power  Supply 
     WARNING     
 Do not damage or modify the power cord. Also, do not place 
heavy objects on the power cord or pull on or excessively 
bend it. This can cause electrical damage, resulting in fi  re or 
electrical shock. 
 Keep the power cord away from all heat sources. Failure to 
do so can cause the power cord insulation to melt, resulting 
in a fi  re or electrical shock. 
 The power cord should not be taut, as this may lead to a 
loose connection and cause overheating, which could result 
in a fi  re.
The power cord may become damaged if it is stepped 
on, fi  xed with staples, or if heavy objects are placed on it. 
Continued use of a damaged power cord can lead to an ac-
cident, such as a fi  re or electrical shock.    
 Do not plug or unplug the power plug with wet hands, as 
this can result in electrical shock. 
 Do not plug the power cord into a multiplug power strip, as 
this can result in a fi  re or electrical shock. 
 Do not bundle up or tie up the power cord in a knot, as this 
can result in a fi  re or electrical shock. 
 Insert the power plug completely into the AC power outlet. 
Failure to do so can result in a fi  re or electrical shock. 
 If excessive stress is applied to the connection part of the 
power cord, it may damage the power cord or the wires in-
side the machine may disconnect. This could result in a fi  re. 
Avoid the following situations:  
 Connecting and disconnecting the power cord frequently.  
 Tripping over the power cord. 
 The power cord is bent near the connection part, and 
continuous stress is being applied to the power outlet or 
the connection part. 
 Applying a shock to the power connector. 
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
-
-
-
- 
						

							
viii
 Do not use power cords other than the one provided, as this 
can result in a fi re or electrical shock. 
 As a general rule, do not use extension cords. Using an ex-
tension cord may result in a fi  re or electrical shock. 
 Remove the power plug from the AC power outlet and 
refrain from using the machine while it thunders. Lightening 
can result in a fi  re, electrical shock or malfunction. 
    CAUTION 
  Do not use a power supply voltage other than that listed 
herein, as this may result in a fi  re or electrical shock.    
 Always grasp the power plug when unplugging the power 
plug. Do not pull on the power cord, as this may expose the 
core wire of the power cord or damage the cord insulation, 
causing electricity to leak, resulting in a fi  re or electrical 
shock. 
 Leave  suffi     cient space around the power plug so that it can 
be unplugged easily. If objects are placed around the power 
plug, you may be unable to unplug it in an emergency.   
  Handling 
     WARNING     
 Do not disassemble or modify the machine. There are 
high-temperature and high-voltage components inside the 
machine which may result in a fi  re or electrical shock.   
 Electrical equipment can be hazardous if not used properly. 
Do not allow children to touch the power cord, cables, inter-
nal gears, or electrical parts. 
 If the machine makes an unusual noise or emits smoke, 
heat, or an unusual smell, immediately turn off   the power 
switches of the machine and computer and disconnect the 
interface cable if it is connected. Then, unplug the power 
plug from the AC power outlet and contact your local au-
thorized Canon dealer. Continued use can result in a fi  re or 
electrical shock.   
 Do not use fl  ammable sprays near the machine. If fl  ammable 
substances come into contact with electrical parts inside the 
machine, this may result in a fi  re or electrical shock.   
 Always turn off    the power switches of the machine and com-
puter, and then unplug the power plug and interface cables 
before moving the machine. Failure to do so can damage 
the cables or cords, resulting in a fi  re or electrical shock.   
 Confi  rm that the power plug or power connecter is inserted 
completely after moving the machine. Failure to do so can 
result in an overheating and fi  re.  
 Do not drop paper clips, staples, or other metal objects 
inside the machine. Also, do not spill water, liquids, or other 
fl  ammable substances (alcohol, benzene, paint thinner, etc.) 
inside the machine. If these items come into contact with 
a high-voltage area inside the machine, this may result in a 
fi  re or electrical shock. If these items are dropped or spilled 
inside the machine, immediately turn off    the power switches 
of the machine and computer and disconnect the interface 
cable if it is connected. Then, unplug the power plug from 
the AC power outlet and contact your local authorized 
Canon dealer.   
 When plugging or unplugging a USB cable when the power 
plug is plugged into an AC power outlet, do not touch the 
metal part of the connector, as this can result in electrical 
shock.   
•
•
•
•
•
•
•
•
•
•
•
•
•
•
    CAUTION 
 Do not place heavy objects on the machine. The object or 
the machine may fall, resulting in personal injury.   
 Turn  off
   the power switch when the machine will not be 
used for a long period of time, such as overnight. Turn off   
the machine and unplug the power plug if the machine 
will not be used for an extended period of time, such as for 
several days.   
 Open or close covers and install or remove cassettes gently 
and carefully. Be careful not to hurt your fi  ngers.  
 Keep your hands and clothing away from the roller in the 
output area. Even if the machine is not printing, the roller 
may suddenly rotate and catch your hands or clothing, 
resulting in personal injury.   
 The output slot is hot during and immediately after printing. 
Do not touch the area surrounding the output slot, as this 
may result in burns.  
 Printed paper may be hot immediately after being output. 
Be careful when removing the paper and aligning the re-
moved paper, especially after continuous printing. Failure to 
do so may result in burns.   
 When performing copy with a thick book placed on the 
platen glass, do not press the feeder forcefully. This may 
damage the platen glass and cause personal injury.  
 Be careful not to drop a heavy object, such as a dictionary, 
on the platen glass. This may damage the platen glass and 
cause personal injury.  
 Close the feeder gently so as not to catch your hand. This 
may result in personal injury.  
 The laser beam can be harmful to human bodies. The laser 
beam is confi  ned in the laser scanner unit by a cover, so 
there is no danger of the laser beam escaping during normal 
machine operation. Read the following remarks and instruc-
tions for safety. 
 Never open covers other than those indicated in this 
manual.  
 Do not remove the caution label attached to the cover of 
the laser scanner unit. 



 If the laser beam should escape and enter your eyes, expo-
sure may cause damage to your eyes.  
 If you operate this machine in manners other than the 
control, adjustment, and operating procedures prescribed in 
this manual, this may result in hazardous radiation exposure. 
 This machine is confi  rmed as the class 1 laser product in 
IEC60825-1:2007.  
   Main tenance  and  Inspections 
     WARNING     
 When cleaning the machine, turn off    the machine and 
computer, and unplug the interface cables and power plug. 
Failure to do so can result in a fi  re or electrical shock.   
•
•
•
•
•
•
•
•
•
•
-
-
-
•
•
• 
						

							
ix
 Unplug the power plug from the AC power outlet periodi-
cally and clean the area around the base of the power plug's 
metal pins and the AC power outlet with a dry cloth to 
remove all dust and grime. In damp, dusty, or smoky loca-
tions, dust can build up around the power plug and become 
damp, which can cause a short circuit, resulting in a fi re.   
 Clean the machine with a well wrung out cloth dampened 
with water or mild detergent diluted with water. Do not 
use alcohol, benzene, paint thinner, or other fl  ammable 
substances. If fl  ammable substances come into contact with 
electrical parts inside the machine, this may result in a fi  re or 
electrical shock.   
 Some areas inside the machine are subject to high voltage. 
When removing jammed paper or when inspecting inside 
of the machine, be careful not to allow necklaces, bracelets, 
or other metal objects to touch the inside of the machine, as 
this can result in burns or electrical shock.   
 Do not dispose of used toner cartridges in open fl  ames. 
This may cause the toner remaining inside the cartridges to 
ignite, resulting in burns or fi  re.   
 Confi  rm that the power plug or power connecter is inserted 
completely after cleaning the machine. Failure to do so can 
result in an overheating and fi  re.  
 Check the power cord and plug regularly. The following 
conditions may result in fi  re, so please contact your local 
authorized Canon dealer or the Canon help line.  
 There are burn marks on the power plug.
The blade on the power plug is deformed or broken.
The power is turned OFF or ON when bending the power 
cord.
The coating of the power cord is damaged, cracked, or 
dented.
A part of the power cord becomes hot. 
 Check regularly that the power cord and plug are not han-
dled in the following manner. Failure to do so can result in a 
fi  re or electrical shock. 
 The power connector is loosened.  
Stress is being applied to the power cord by a heavy ob-
ject or by fi  xing it with staples.
The power plug is loosened.
The power cord is tied in a bundle.   
 A part of the power cord is put in an aisle.  
 The power cord is put in front of the heating appliance. 
    CAUTION 
  The  fi  xing unit and its surroundings inside the machine 
become hot during use. When removing jammed paper or 
when inspecting the inside of the machine, do not touch the 
fi  xing unit and its surroundings, as this may result in burns.  



•
•
•
•
•
•
-
-
-
-
-
•
-
-
-
-
-
-
•



 When removing jammed paper or when inspecting the 
inside of the machine, do not expose yourself to the heat 
emitted from the fi  xing unit and its surroundings for a pro-
longed period of time. Doing so may result in low tempera-
ture burns, even though you did not touch the fi  xing unit 
and its surroundings directly, as this may result in burns.  
 If paper is jammed, remove the jammed paper so that any 
pieces of paper do not remain inside the machine accord-
ing to the displayed message. Also, do not put your hand 
in an area other than indicated areas, as this may result in 
personal injuries or burns.  
 When removing jammed paper or replacing a toner 
cartridge, be careful not to get any toner on your hands or 
clothing, as this will dirty your hands or clothing. If toner 
gets on your hands or clothing, wash them immediately 
with cold water. Washing with warm water sets the toner, 
making it impossible to remove the toner stains.   
 When removing jammed paper, be careful not to allow the 
toner on the paper to scatter. The toner may get into your 
eyes or mouth. If toner gets into your eyes or mouth, wash 
them immediately with cold water and consult a physician.   
 When loading paper or removing jammed documents or 
paper, be careful not to cut your hands with the edges of the 
paper.   
 When removing a toner cartridge, remove the toner car-
tridge carefully so as to prevent the toner from scattering 
and getting into your eyes or mouth. If toner gets into your 
eyes or mouth, wash them immediately with cold water and 
consult a physician.   
 Do not attempt to disassemble the toner cartridge. The 
toner may scatter and get into your eyes or mouth. If toner 
gets into your eyes or mouth, wash them immediately with 
cold water and consult a physician.   
 If toner leaks from the toner cartridge, be careful not to 
inhale the toner or allow it to come into direct contact with 
your skin. If the toner comes into contact with your skin, 
wash with soap. If the skin becomes irritated or you inhale 
the toner, consult a physician immediately.  
 Consumables 
     WARNING     
 Do not dispose of used toner cartridges in open fl  ames. This 
may cause the toner to ignite, resulting in burns or fi  re.   
 Do not store toner cartridges or paper in a location exposed 
to open fl  ames. This may cause the toner or paper to ignite, 
resulting in burns or fi  re. 
 When disposing of a toner cartridge, place the toner 
cartridge into a bag to prevent the toner from scattering, 
and then dispose of the toner cartridge according to local 
regulations.   
•
•
•
•
•
•
•
•
•
•
• 
						

							
x
    CAUTION 
 Keep the toner cartridges and other consumables out of 
the reach of small children. If the toner or other parts are 
ingested, consult a physician immediately.   
 Do not attempt to disassemble the toner cartridge. The 
toner may scatter and get into your eyes or mouth. If toner 
gets into your eyes or mouth, wash them immediately with 
cold water and consult a physician.   
 If toner leaks from the toner cartridge, be careful not to 
inhale the toner or allow it to come into direct contact with 
your skin. If the toner comes into contact with your skin, 
wash with soap. If the skin becomes irritated or you inhale 
the toner, consult a physician immediately.  
 Do not pull out the sealing tape forcefully or stop at mid-
point, as this may cause toner to spill out. If toner gets into 
your eyes or mouth, wash them immediately with cold water 
and consult a physician.  
 Others 
     WARNING     
 If you are using a cardiac pacemaker 
This machine generates a low level magnetic fi eld. If you 
use a cardiac pacemaker and feel abnormalities, please 
move away from this machine and consult your physician 
immediately. 
    Telephone  Equipment 
When using telephone equipment, basic safety precautions 
should always be followed to reduce the risk of fi  re, electric 
shock, and injury to persons, including the following:
1. Do not use this machine near water (i.e., near a bathtub,  kitchen sink, or laundry tub), or in a wet basement or near a 
swimming pool.
2. Avoid using the telephone during an electrical storm, as  there may be a remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity  of the leak.
•
•
•
•
• 
						

							
xi
Installation Requirements and Handling
 Temperature and Humidity Conditions 
 Temperature range: 50 to 86°F (10 to 30°C) 
 Humidity range: 20 to 80 % RH (no condensation)  
 IMPORTANT
 Protecting the machine from condensation  To prevent condensation from forming inside the machine 
in the following cases, let the machine adjust to the ambient 
temperature and humidity for at least two hours before use.   When the room where the machine is installed is heated 
rapidly  
 When the machine is moved from a cool or dry location to 
a hot or humid location  
 If water droplets (condensation) form inside the machine, 
this can result in paper jams or poor print quality.  
 When using an ultrasonic humidifi  er 
 When you are using an ultrasonic humidifi  er, it is therefore 
recommended that you use purifi  ed water or other water that 
is free of impurities.
If you use tap water or well water, impurities in the water will 
be dispersed through the air. This can be trapped inside the 
machine, causing degradation in print quality. 
 Power  Supply   Requirements 
120 to 127 V 60 Hz
 IMPORTANT
 Precautions when connecting the power cord 
 Do not connect this machine to an uninterruptible power 
source.  
 Use an AC power outlet exclusively for the machine. Do not 
use the other sockets of the AC power outlet.   
 Do not plug the power plug into the auxiliary outlet on a 
computer. 
Do not use the same AC power outlet for both the machine 
and any of the following equipment.    Copy machine  
 Air conditioner  
 Shredder   
 Equipment that consumes a large amount of electricity  
 Equipment that generates electrical noise  
 When unplugging the power cord, keep interval of 5 sec-
onds or more before plugging it again.  
 Miscellaneous  precautions   The maximum power consumption of the machine is as 
follows. MF8350Cdn: 1,200 W or less
MF8050Cn: 900 W or less 
 Electrical noise or a dramatic drop in mains voltage may 
cause the machine or computer to operate incorrectly or 
lose data.   
•
•
•
-
-
•
•
•
•
-
-
-
-
-
•
•
-
-
•
 Installation   Requirements 
 A location with suffi   cient space 
 A location with good ventilation 
 A location with a fl  at, even surface 
 A location able to fully support the weight of the machine 
 IMPORTANT
 Do not install the machine in the following locations, as 
this may result in damage to the machine.   A location subject to dramatic changes in temperature or 
humidity  
 A location subject to condensation  
 A poorly ventilated location 
(If you use the machine for a long time or to perform a large 
amount of printing in a poorly ventilated room, the ozone 
or other odors generated by the machine may create an 
uncomfortable working environment. In addition, chemical 
particles are dispersed during printing; therefore, it is impor-
tant to provide adequate ventilation.)   
 A location near equipment that generates magnetic or elec-
tromagnetic waves  
 A laboratory or location where chemical reactions occur  
 A location exposed to salt air, corrosive gases, or toxic gases  
 A location, such as on a carpet or mat, that may warp from 
the weight of the machine or where the machine is liable to 
sink  
 Installation   Space 
 Required installation space 
MF8350Cdn


Front View
Paper
cassette Feeder cover Feeder
Rear cover in. (mm)4
(100)
4
(100)
4
(100)
4
(100) 4
(100)
52 1/4 (1327)
26 3/4 (679)
37 1/2 (951) 33 1/2 (851)


MF8050Cn


Front View
Paper
cassette Feeder cover Feeder
Rear cover in. (mm)
48 3/8 (1229)4
(100)
4
(100)
4
(100)
4
(100) 4
(100)
26 1/2 (674)
31 1/2 (801)




•
•
•
•
•
•
•
•
•
•
•
 In order to use this machine in a safe and trouble-free manner, install the machine in a place that fulfi
 lls the following conditions. 
Also, read the remarks carefully.  
						

							
xii
  Maintenance  and  Inspections 
 IMPORTANT
 Follow the instructions in the caution label attached to this 
machine.  
 Avoid shaking or applying a shock to this machine.  
 To prevent the paper jam, do not turn the power ON/OFF, 
open/close the operation panel or rear cover, and load/un-
load paper in the middle of printing operation.  
 Be sure to remove the toner cartridge from the machine 
when transporting the machine.  
 To avoid exposing the toner cartridge to light, place it in the 
protective bag included with this machine or wrap it in a 
thick cloth.  
 Clean this machine regularly. If this machine becomes dusty, 
it may operate improperly.  
 Use a modular cable of 3 m or shorter in length.  
Depending on your locale or your telephone connection, 
you may be unable to perform data communication. In this 
case, contact your local authorized Canon dealer or the 
Canon help line.
 The repairing parts and toner cartridges for the machine will 
be available for at least seven (7) years after production of 
this machine model has been discontinued.  

$VTUPNFS
4VQQPSU

 Customer Support (U.S.A.)
Your machine is designed with the latest technology to pro-
vide trouble-free operation. If you encounter a problem with 
the machine's operation, try to solve it by using the informa-
tion in Chapter 9. If you cannot solve the problem or if you 
think your machine needs servicing, contact Canon Customer 
Care Center at 1-800-OK-CANON between the hours of 8:00 
A.M. to 8:00 P.M. EST Monday through Friday. On-line support 
for 24 hours is also available at the website.
http://www.canontechsupport.com/
Customer Support (Canada)
Canon Canada Inc., off  ers a full range of customer technical 
support options*:
For step-by-step troubleshooting, e-mail technical support, 
the latest driver or document downloads, and answers to 
frequently asked questions, visit http://www.canon.ca/
Free live technical support 9 A.M. to 8 P.M. EST Monday 
through Friday (excluding holidays) for products still under 
warranty 1-800-OK-CANON
For the location of the authorized service facility nearest 
you, visit http://www.canon.ca/ or 1-800-OK-CANON
If the problem cannot be corrected by using one of the 
above technical support options, repair options are available 
at the time of your call to the live technical support number 
above or via the website at http://www.canon.ca/
*  Support program specifi  cs are subject to change without 
notice. 
•
•
•
•
•
•
•
•
•
•
•
•
• 
						

							
xiii
Legal Notices
International  ENERGY STAR Program
As an ENERGY STAR® Partner, Canon U.S.A., Inc. 
has determined that this product meets the 
ENERGY STAR Program for energy effi  ciency.
The International ENERGY STAR Offi   ce Equip-
ment Program is an inte rnational program that 
promotes energy saving through the use of 
computers and other offi   ce equipment.
The program backs the development and 
dissemination of products with functions that 
eff   ectively reduce energy consumption. It is an 
open system in which business proprietors can 
participate voluntarily.
The targeted products are offi   ce equipment, 
such as computers, displays, printers, facsimi-
les, and copiers. The standards and logos are 
uniform among participating nations.
 IPv6 Ready Logo 
The machine uses the operating system which 
obtained IPv6 Ready Logo Phase-1 defi  ned by 
IPv6 Forum.
 
5SBEFNBSLT
Canon, the Canon logo, and Color imageCLASS are registered 
trademarks of Canon Inc. in the United States and may also be 
trademarks or registered trademarks in other countries.
Microsoft, Windows and Windows Vista are either trademarks 
or registered trademarks of Microsoft Corporation in the 
United States and/or other countries.
All other product and brand names are registered trademarks, 
trademarks or service marks of their respective owners.
 
$PQZSJHIU
© 2010 by Canon Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, 
transcribed, stored in a retrieval  system, or translated into any 
language or computer language in any form or by any means, 
electronic, mechanical, magnetic, optical, chemical, manual, or 
otherwise, without the prior written permission of Canon Inc.
5IJSE
1BSUZ
4PGUXBSF
A. This product includes third-party software modules. Use and 
distribution of this software modules (the “SOFTWARE”) are 
subject to conditions (1) through (9) below.
(1) You agree that you will comply with any applicable export  control laws, restrictions or regulations of the countries 
involved in the event that this product including the SOFT-
WARE is shipped, transferred or exported into any country.
(2) Rights holders of the SOFTWARE retain in all respects the title, ownership and intellectual property rights in and to 
the SOFTWARE. Except as expressly provided herein, no 
license or right, expressed or implied, is hereby conveyed or 
granted by rights holders of the SOFTWARE to you for any 
intellectual property of rights holders of the SOFTWARE.
(3) You may use the SOFTWARE solely for use with the Canon  product you purchased (the “PRODUCT”).
(4) You may not assign, sublicense, market, distribute, or trans- fer the SOFTWARE to any third party without prior written 
consent of rights holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may transfer the  SOFTWARE only when (a) you assign all of your rights to the 
PRODUCT and all rights and obligations under the condi-
tions to transferee and (b) such transferee agrees to be 
bound by all these conditions.
(6) You may not decompile, reverse engineer, disassemble or  otherwise reduce the code of the SOFTWARE to human 
readable form.
(7) You may not modify, adapt, translate, rent, lease or loan the  SOFTWARE or create derivative works based on the SOFT-
WARE.
(8) You are not entitled to remove or make separate copies of  the SOFTWARE from the PRODUCT.
(9) The human-readable portion (the source code) of the SOFT- WARE is not licensed to you.
B. Notwithstanding A above, in case the other conditions 
accompany third-party software modules , these software 
modules are subject to the other conditions.
5IF
4PGUXBSF
4VCKFDUFE
UP
UIF
0UIFS
$POEJUJPOT
Please refer to eManual on a CD-ROM bundled with this prod-
uct, for more detail and corresponding license conditions.
 
%JTDMBJNFST
The information in this document is subject to change without 
notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH RE-
GARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT 
AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, 
THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANT-
ABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR 
NON-INFRINGEMENT. CANON INC. SHALL NOT BE LIABLE FOR 
ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF 
ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE 
USE OF THIS MATERIAL.
PS
$

64
POMZ
Included battery contains Perchlorate Material - special han-
dling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for 
details. 
						

							
xiv
-FHBM
-JNJUBUJPOT
PO
UIF
6TBHF
PG
:PVS
1SPEVDU
BOE
UIF
6TF
PG
*NBHFT
Using your product to scan, print or otherwise reproduce 
certain documents, and the use of such images as scanned, 
printed or otherwise reproduced by your product, may be pro-
hibited by law and may result in criminal and/or civil liability.
A non-exhaustive list of these documents is set forth below. 
This list is intended to be a guide only. If you are uncertain 
about the legality of using your product to scan, print or oth-
erwise reproduce any particular document, and/or of the use 
of the images scanned, printed or otherwise reproduced, you 
should consult in advance with your legal advisor for guidance.
Paper Money
Money Orders
Certifi  cates of Deposit
Postage Stamps (canceled or uncanceled)
Identifying Badges or Insignias
Selective Service or Draft Papers
Checks or Drafts Issued by Governmental Agencies
Motor Vehicle Licenses and Certifi  cates of Title
Travelers Checks
Food Stamps
Passports
Immigration Papers
Internal Revenue Stamps (canceled or uncanceled)
Bonds or Other Certifi  cates of Indebtedness
Stock Certifi  cates
Copyrighted Works/Works of Art without Permission of 
Copyright Owner
$$
	FEFSBM
$PNNVOJDBUJPOT
$PNNJTTJPO

Color imageCLASS MF8350Cdn: F157902
Color imageCLASS MF8050Cn: F157802
This device complies with Part 15 of the FCC Rules. Operation 
is subject to the following two conditions:
(1) This device may not cause harmful interference,
 and
(2) this device must accept any interference received, including  interference that may cause undesired operation.
This equipment has been tested and found to comply with the 
limits for a class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. 
This equipment generates, uses  and can radiate radio frequen-
cy energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off   and 
on, the user is encouraged to try to correct the interference by 
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and re-
ceiver.
Connect the equipment to an outlet on a circuit diff  erent 
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for 
help.
Use of shielded cable is required to comply with class B limits 
in Subpart B of Part 15 of the FCC Rules. Do not make any 
changes or modifi  cations to the equipment unless otherwise 
specifi  ed in this manual. If you make such changes or modifi  ca-
tions, you could be required to stop operation of the equip-
ment. •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. 1-800-OK-CANON
6TFST
JO
UIF
64
Pre-Installation Requirements for Canon Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine. 
See Chapter 11, “Appendix,” for specifi  c dimensions and 
weight.
B. Order Information 1. A single telephone line (touch-tone or rotary) should be used.
2. Order an RJ11-C telephone wall jack (USOC), which  should be installed by the telephone company. If the 
RJ11-C wall jack is not present, telephone/facsimile op-
eration is not possible.
3. Order a normal business line from your telephone  company’s business representative. The line should be 
a regular voice grade line or an equivalent one. Use one 
line per unit.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you com-
municate overseas
    NOTE 
Canon recommends an individual line following industry 
standards, i.e., 2,500 (touch-tone) or 500 (rotary/pulse dial) 
telephones. A dedicated extension off    a PBX (Private Branch 
eXchange) unit without “Call Waiting” can be used with your 
facsimile unit. Key telephone systems are not recommended 
because they send nonstandard signals to individual tel-
ephones for ringing and special codes, which may cause a 
facsimile error.
C. Power Requirements
The machine should be connected to a standard 120 volt 
AC, three-wire grounded outlet only.
Do not connect this machine to an outlet or power line 
shared with other appliances that cause "electrical noise.” 
Air conditioners, electric typewriters, copiers, and machines 
of this sort generate electrical noise that often interferes 
with communications equipment and the sending and 
receiving of documents.
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and 
the requirements adopted by the ACTA. On the rear panel of 
this equipment is a label that contains, among other informa-
tion, a product identifi  er in the format of US:AAAEQ##T XXXX. 
If requested, this number must be provided to the telephone 
company.
The REN (Ringer Equivalence Number) is used to determine the 
number of devices that may be connected to a telephone line. 
Excessive RENs on a telephone line may result in the devices 
not ringing in response to an incoming call. In most, but not 
all areas, the sum of the RENs should not exceed fi  ve (5.0). To 
be certain of the number of devices that may be connected 
to a line, as determined by the total RENs, contact the local