Canon Pixma Mp630 User Guide

For information on cleaning the inside of the Cassette, refer to Routine Maintenance.
Check 9: Is the Rear Cover closed completely?
Paper may be jammed if the Rear Cover is not closed completely. Push the Rear Cover until it is
closed completely.
Refer to Overview of the Machine for the position of the Rear Cover.
Page top
Page 731 of 805 pages Paper Does Not Feed Properly
 

Advanced Guide > Troubleshooting > Paper Does Not Feed from the Paper Source Specified in the Printer Driver
Paper Does Not Feed from the Paper Source Specified in the
Printer Driver
Check: Is the paper source setting inconsistent between the application
program and the printer driver?
Change the application software setting corresponding to the printer driver setting, or click the Print
Options on the Page Setup sheet in the printer driver and select Disable the paper source setting of
the application...

Advanced Guide > Troubleshooting > Paper Jams
Paper Jams
Note
If you need to turn off the machine to remove jammed paper during printing, press the Stop button
to cancel print jobs before turning off the machine.
If the paper is jammed in the Paper Output Slot or the Rear Tray:
Remove the paper following the procedure below.
1.Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot,
whichever is easier.
Note
If the paper tears and a piece remains inside the machine, turn the...

2.Pull the paper out slowly.
Note
Be careful not to touch the components inside the machine.
If you cannot pull the paper out, turn the machine off and turn it back on. The paper may
be ejected automatically.
3.Attach the Rear Cover.
Push the left side of the Rear Cover until it is closed completely.
If you were not able to remove the paper out in step 2:
4.Remove the Cassette.
5.Pull the paper out slowly.
6.If any paper is sticking out of the Cassette, remove the paper, align and reload
the paper in the...

When reloading the paper into the machine, confirm that you are using the correct paper
and are loading it into the machine correctly.
Loading Paper / Originals
7.Insert the Cassette into the machine again, and press the OK button on the
machine.
If you turned off the machine in step 2, all print jobs in queue are canceled. Reprint if
necessary.
If you cannot remove the paper or if the paper tears inside the machine, or if the paper jam error
continues after removing the paper, contact your Canon service...

continues after removing the paper, contact your Canon service representative.
In other cases:
Make sure of the following:
Check 1: Are there any foreign objects in the Rear Tray or around the Paper
Output Slot?
Check 2: Is the Rear Cover closed completely?
Check 3: Is the paper curled?
Check 3: Load the paper after correcting its curl.
Page top
Page 736 of 805 pages Paper Jams
 

Advanced Guide > Troubleshooting > Message Appears on the Computer Screen
Message Appears on the Computer Screen
Service Error 5100 Is Displayed
Error Regarding Automatic Duplex Printing Is Displayed 
Error Regarding Automatic Print Head Alignment Is Displayed 
Writing Error/Output Error/Communication Error
Error Number: 300 Is Displayed
Error Number: 1700 Is Displayed
Ink Info Number: 1600 Is Displayed
Ink Info Number: 1683 Is Displayed
Ink Info Number: 1688 Is Displayed
Error Number: 1851 Is Displayed...

Drivers.
* In the following instructions, XXX signifies your machines name.
1.Log on as a user account with administrator privilege.
2.Click Control Panel, then Printer under Hardware and Sound.
In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and
Faxes.
In Windows 2000, click Control Panel then Printers.
3.Right-click the Canon XXX Printer icon, then select Properties.
4.Click the Ports tab to confirm the port settings.
Make sure that a port named USBnnn (where n is a...

If you are using a relay device such as a USB hub, disconnect it, connect the machine
directly to the computer, and try printing again. If printing starts normally, there is a
problem with the relay device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try
printing again.
Check 3: Make sure that your machines name is selected in the Print dialog
box.
Opening the Page Setup and Print Dialog Box (Macintosh)
Error Number:...

Error Number: 2500 Is Displayed
Check: See Auto head align has failed. in An Error Message Is Displayed on the
LCD and take the appropriate action.
Other Error Messages
Check: If an error message is displayed outside the printer status
monitor, check the following:
Could not spool successfully due to insufficient disk space
Delete any unnecessary files to increase the amount of free space on the disk.
Could not spool successfully due to insufficient memory
Quit other running applications to increase...