Canon Pixma Mp630 User Guide

Replace the ink tank.
Routine Maintenance
The following ink has run out.
Replace the ink tank.
U163
Ink has run out. (The lamp on the ink tank flashes.)
Replace the ink tank and close the Scanning Unit (Cover).
Printing under the current condition may damage the
machine.
If you want to continue printing in this condition, you need to
release the function for detecting the remaining ink level.
Press and hold the Stop button for at least 5 seconds, and
then release it.
With this operation, releasing the...

Auto head align has failed.
Press OK and repeat operation. 
Print Head nozzles are clogged.
Press the OK button to dismiss the error, and print the
nozzle check pattern to check the status of the Print Head.
Routine Maintenance
Paper of size other than A4 or Letter is loaded in the Rear
Tray.
Press the OK button on the machine to dismiss the error,
then load a sheet of supplied paper (Paper For Print
Head Alignment) or A4/Letter-sized Canon Matte Photo
Paper MP-101 with the printing side (whiter side)...

Advanced Guide > Troubleshooting > LCD Cannot Be Seen At All
LCD Cannot Be Seen At All
If the Power lamp is lit:
The machine is not powered on. Connect the power cord and press the ON button.
If the Power lamp is lit:
The LCD may be in the screen-saver mode. On the Operation Panel, press a button other than the 
ON button.
Page top
Page 703 of 805 pages LCD Cannot Be Seen At All
 

Advanced Guide > Troubleshooting > An Unintended Language Is Displayed on the LCD
An Unintended Language Is Displayed on the LCD
Select the language you want to be displayed according to the following procedure.
1.Press the HOME button and wait for about 5 seconds.
2.Select , and then press the OK button.
3.Press the  button to select , then press the OK button.
4.Press the  button five times, then press the OK button.
If the Bluetooth unit is connected to the machine, press the  button six times, and...

Advanced Guide > Troubleshooting > Cannot Install the MP Drivers
Cannot Install the MP Drivers
If the installation does not start even after the Setup CD-ROM is inserted
into your computers disc drive:
Start the installation following the procedure below.
1.Click Start then Computer.
In Windows XP, click Start then My Computer.
In Windows 2000, double-click the My Computer icon on the desktop.
2.Double-click the  CD-ROM icon on the displayed window.
If the contents of the CD-ROM are displayed,...

follow the procedure below to reinstall the MP Drivers.
Note
In Windows Vista, The printer is not detected. Check the connection. may be displayed
depending on the computer you use. In this case, wait for a while. If you still cannot proceed to
the next step, follow the procedure below to reinstall the MP Drivers.
1.Click Cancel on the Printer Connection screen.
2.Click Start Over on the Installation Failure screen.
3.Click Back on the screen that appears next.
4.Click Exit on the PIXMA XXX screen, then...

Advanced Guide > Troubleshooting > Cannot Connect to Computer Properly
Cannot Connect to Computer Properly
Printing or Scanning Speed Is Slow/Hi-Speed USB Connection Does Not Work/
This device can perform faster Message Is Displayed
If your system environment is not fully compatible with Hi-Speed USB, the machine will operate at
a lower speed provided under USB 1.1. In this case, the machine operates properly but printing
speed may slow down due to communication speed.
Check: Check the following to make...

Advanced Guide > Troubleshooting > Print Results Not Satisfactory
Print Results Not Satisfactory
If the print result is not satisfactory such as white streaks, misaligned lines, and uneven colors, confirm
the paper and print quality settings first.
Check 1: Do the page size and media type settings match the size and
type of the loaded paper?
When these settings are incorrect, you cannot obtain a proper print result.
If you are printing a photograph or an illustration, incorrect paper type setting may...

No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
Lines Are Misaligned
Printed Paper Curls or Has Ink Blots
Paper Is Smudged/Printed Surface Is Scratched
Back of the Paper Is Smudged
Vertical Lines Are Printed on the Sides of the Printout
Colors Are Uneven or Streaked
Page top
Page 709 of 805 pages Print Results Not Satisfactory
 

Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Cannot Print to End of Job
Cannot Print to End of Job
Check 1: Is the size of the print data extremely large?
Click Print Options on the Page Setup sheet. Then, select the Prevent loss of print data check box in
the displayed dialog.
Check 2: Is the space of your computers hard disk sufficient?
Delete unnecessary files to free disk space.
Page top
Page 710 of 805 pages Cannot Print to End of Job