Canon Pixma Mp620 Quick Start Guide

  
5
Confirming the Setup Flow
C o n f i r m i n g   Yo u r   C o n n e c t i o n   Ty p e
■
Before starting setup, decide on the most suitable connection method for the machine.
This machine can be used over a wireless or wired LAN, as well as via USB connection.
Wireless LAN
USB
Wired LAN
Before connecting the machine to the network, confirm that configuration of the computer and network devices (router , 
access point, etc.) is complete, and that the computer can connect to t\
he network. For the...

0
5
Quit all running applications before installation.
Log into a user account with the administrator privilege.
Do not switch user accounts during installation.
It may be necessary to restart your computer during the installation pro\
cess. 
Follow the on-screen instructions and click OK, and do not remove the Setup CD-
ROM during restarting. The installation resumes from where it left off when your 
computer has been restarted.
Since Mac OS 9, Mac OS X Classic environments, Mac OS X v.10.3.8 or...

  
A
B
C
G
H
I
J
K
D
E
F
Which connection method 
do you intend to use?USB
S e t u p   F l o w
■
P.13 P.16 P.29
P.32 P.37
P.12 P.13 P.17 P.29
P.12 P.32 P.38 P.45
P.12 P.13 P.29
P.21
P.12 P.32 P.45
P.40
P.51 P.13 P.29
P.48 P.13 P.26 P.29
P.48 P.32 P.44 P.45
P.13 P.26 P.29
P.32 P.44 P.45
Is this your first time 
connecting the machine 
to the network? Network
Yes
No
Wired LAN
Wireless LAN
P.26
To use the machine on other computers USB
WPS
WCN
 


6
13452
D
F
C
E
(A)
Use the Easy-Scroll Wheel (A) or the 
[ or 
] button to select 
Settings, then 
press the  OK button. Select 
Device 
settings , then press 
the  OK button. Select 
LAN settings , 
then press the  OK 
button. Select 
Change 
wireless/wired , then 
press the  OK button. Select either to the 
connection method, 
then press the 
OK 
button.
Setup the Machine and the Computer
Machine's LAN Setting
Next, read "Install the Software" !
Windows
MacintoshP.13
P.32
 

  
12
A
C
G
I
J
E
7
1
2
3
Click Cancel  to quit the screen.
Proceed from 
.
Remove the USB cable connected to 
your computer.
(A)
The screen may close. In this case, proceed 
from 
.
Install the Software
Setup the Machine and the Computer
Windows
Turn on the computer, then insert the 
Setup CD-ROM
 into the CD-ROM drive.
Operating noise continues for about 
30 seconds until the machine turns off. 
Make sure that the POWER lamp (B) 
stops flashing.
•
Press the 
ON button (A) to TURN 
OFF THE...


345
C
A
E
G
I
J
7
Windows VistaWindows Vista
AutoPlay  screen appears, click 
Run Msetup4.exe . User Account Control
 screen 
appears, click  Continue.
If the same screen reappears in 
subsequent steps, click  Continue.
Click Easy Install .
The drivers, application software, and on-screen manuals are installed 
automatically.
If you want to select particular items to install, click  Custom Install and follow 
the on-screen instructions to proceed with the installation.
•
 

  
7
A
C
G
I
J
E
6
Windows
Read the License Agreement  screen 
carefully and click  Yes.
Installation starts.
Follow any on-screen instructions to install 
the software.
•
Click 
Install .
Move the cursor over items to display 
explanations. USB
Wired LAN
P.26
Wireless LAN
Additional 
Computer
P.16
P.17
P.21
P.26
P.26
Go to either of the following procedures 
according to your connection method!
J
E
C
A
WPS
WCN
I
G
 


USB
12
A
8
Windows
When the Printer Connection  screen appears, connect the machine to the computer with a 
USB cable, then turn on the machine.
USB Connection
Setup the Machine and the Computer
Next, read "12 Information" on page 29!
When the machine is recognized by the computer, a message appears on the screen.
If you cannot go to the next procedure after 10 minutes, click  Help and confirm the message.
•
•
The USB port is located on the right side at the back of the machine.
•
On...

  
12
C
9
First-time Setup for Use over Wired LAN
Setup the Machine and the Computer
Set the machine's LAN setting to Wired LAN active beforehand. For 
details, refer to “6 Machine's LAN Setting” on page 12.
•
When a confirmation screen for the machine's LAN setting appears, click 
OK
.
Windows
Confirm that USB Cable and LAN Cable are Ready.
P r e p a r e   C a b l e s
On the  Setup Method  screen, select Connect printer to the 
network for the first time , then click Next.
USB...


USB
3
C
4
9
When the Printer Connection  screen appears, connect the machine to the computer with 
a USB cable, then turn on the machine.
Set up the machine over a USB connection until the network connection is complete. When the 
Setup Preparations  dialog box appears, 
confirm that preparation is complete, then click  Next.
The machine is recognized by the computer, then message appears on the screen.
If you cannot go to the next procedure after 10 minutes, click  Help and confirm the...