Canon Pixma Mp620 Quick Start Guide

  
USB
USB
(A)4
D
5
Connect the machine to the network device with a LAN cable (A), then click Yes. When the  Setup Completion dialog box appears, remove 
the USB cable, then click  OK.
The Printer Setup Utility and Canon IJ Network Scanner Selector 
will start up.
Next, read "18 Add the Machine" on page 45!
Macintosh
If the  Set Printer IP Address dialog box appear, refer to "5.6 The Set Printer IP Address dialog 
box is displayed during setup" in the printed manual:  Network...

0
231
F
16
First-time Setup for Use over Wireless LAN
Setup the Machine and the Computer
Set the machine's LAN setting to 
Wireless LAN active beforehand. 
For details, refer to “6 Machine's LAN 
Setting” on page 12.
•
If no machine is detected, refer to "4.1 The machine is not detected" in the 
printed manual: Network Setup Troubleshooting . Make sure there is no problem, 
then click Update.
•
If the 
Setup Preparations  
dialog box appears, confirm that 
preparation is complete,...

  
You can retrieve your network key by using the Canon PIXMA 
Wireless Setup Assistant or the instructions which can be 
downloaded from the Canon support webpage (www.usa.canon.
com/downloadlibrary).
If you are unable to retrieve the network key or other settings 
refer to the manual of your access point or router, or contact its 
manufacturer.
4
F
D e t e c t  A c c e s s   P o i n t
Macintosh
To connect to the access point with WEP or WPA displayed in the Encryption column, enter the...


USB
(A)
67
F
16
5
Press the ON button (A) TO TURN OFF 
THE MACHINE, then place the machine 
in the location where you will use it, and 
turn on it.
D e t e c t   t h e   M a c h i n e
If no connection is established even 
after Connect is clicked, refer to "5.6 
The Set Printer IP Address dialog 
box is displayed during setup" in 
the printed manual:  Network Setup 
Troubleshooting .
•
If the machine is detected automatically, 
the 
Set Printer IP Address  screen does 
not appear. Go...

  
9
F
8
Macintosh
If any symbol other than  is displayed, refer to displayed comments 
and Help for improving the status of communication link.
To check whether the new location is better, click Remeasurement . 
Measurement of the communication status is performed again.
When any message on  Overall network performance appears in the 
measurement results, rearrange the printer and other network devices 
following the instructions on the screen.
•
•
•
Confirm the measurement results, then click...


1234
K
H
17
Macintosh
If the Setup Preparations  
dialog box appears, confirm that 
preparation is complete, then 
click  OK. When the 
Cancel Setup  screen 
appears, then click  Cancel.
When the You have no printers 
available. screen appears, click 
Cancel.
•
Connect the Wired LAN / Wireless LAN
Setup the Machine and the Computer
On the 
Canon IJ Network Tool  
screen, select  LAN connection , 
then click  OK. Select 
Setup in the pop-up 
menu, then click  Register 
Printer .
The Printer...

  
12
H
K
D
F
18
Mac OS X v.10.5.x/v.10.4.x
Wait for a while, then select  Canon MP620 
series  and click  Add.
Add the Machine
Setup the Machine and the Computer
In Mac OS X v.10.4.x, click  More Printers in the 
Printer Browser  screen. The alphanumeric string after 
Canon MP620 
series  is the machine's MAC address.
If the machine has not been detected, make 
sure of the following.
•
•
When the 
Printer List  screen appears, 
click  Add.
Mac OS X v.10.4.x/v.10.3.9
Mac OS X v.10.4.x
Mac...


34
K
H
F
D
18
Select Canon IJ Network  in the pop-up menu, select your machine’s name in the list 
of printers, then click  Add.
The alphanumeric string after  Canon MP620 series is the machine's MAC address.
If the machine has not been detected, make sure of the following.
•
•
Confirm that your 
MP620 series is added to the list of 
printers.
Mac OS X v.10.4.x/v.10.3.9
Mac OS X v.10.4.x/v.10.3.9
The machine is turned on.
The firewall function of any security software is turned off.
Wired...

  
5
H
K
D
F
6
On the Canon IJ Network Scanner Selector  
screen, select  Canon MP620 series Network  in 
TWAIN Data Source Name  and the MAC address 
of the machine in  Network Device List , then click 
Apply  to use the machine as a scanner.
To confirm the machine's MAC address, refer to "Troubleshooting" in the on-screen manual:  Advanced Guide 
available via Solution Menu. 
With Mac OS X v.10.5.x, the Card Slot is not available when using the machine over a ne\
twork.
•
•...


(A)21
G
H
3
19
If your access point supports WPS 
(Wi-Fi Protected Setup), you can set 
the wireless LAN security easily.Use the Easy-Scroll Wheel (A) or the [ or 
]  button to select 
Settings, then press the 
OK  button. Select 
Device settings , 
then press the  OK 
button.
WPS Connection
Setup the Machine and the Computer
Select  LAN settings , then 
press the  OK button.