Canon Pixma Mp620 Quick Start Guide

  
5647
G
H
Select Wireless LAN active , 
then press the  OK button.
Select 
Change wireless/
wired , then press the  OK 
button. Select 
Wireless LAN 
settings , then press the  OK 
button. Select 
WPS settings , then 
press the  OK button.
Windows
／Macintosh
 

0
1098
G
H
19
To use the PIN code method for setup, select PIN method 
on step , then press the OK button. Follow the on-screen is 
instructions to operate the machine and access point. When 
the setup is complete, the completion screen appears then 
the LAN settings screen returns. A timeout error occurs if 
setup is not completed within 10 minutes. If the timeout error 
screen appears, refer to "5.12 The Timeout error screen is 
displayed during WPS setup" in the printed manual:  Network...

  
12
I
20
The machine supports "WCN-UFD".
•
You can set the wireless LAN 
security on the machine easily by 
using the WCN (Windows Connect 
Now) function of Windows Vista 
together with a USB flash drive.
Canon assumes no responsibility 
for any damage or loss of stored 
data regardless of the cause.
If your USB flash drive cannot be 
attached to the direct print port of 
the machine, an extension cord for 
USB flash drives may be required. 
Purchase one at an electronics 
shop....


54
I
3
20
Click Add the device or computer using a 
USB flash drive . From the list, select the network name (SSID), 
then click 
Next.
Click 
I want to add a wireless device or 
computer that is not on the list, using a USB 
flash drive .
If the User Account Control screen appears, 
click Continue. If the same screen reappears in 
subsequent steps, click  Continue.
•
 

  
I
67
Connect the USB flash drive to the computer, confirm that the 
drive name is displayed, then click Next. When the above screen appears, remove the USB flash drive 
from the computer, then click 
Close.
Windows
 


(A)
1011
I
9
20
8
Use the Easy-Scroll Wheel (A) or the [ or 
] 
button to select  Settings, then press the  OK 
button. Select 
Device settings , then 
press the  OK button. Select 
LAN settings , then press 
the  OK button. Select 
Change wireless/
wired , then press the  OK 
button.
 

  
1415
I
1312
Select Wireless LAN 
active , then press the  OK 
button. Select 
Wireless LAN 
settings , then press the 
OK  button. Select 
WCN settings , 
then press the  OK button. Connect the USB flash drive to the direct print port 
(USB connector) on the front of the machine, then 
press the 
OK button.
The completion screen appears on the LCD of the 
machine, then the  LAN settings screen returns. Remove 
the USB flash drive from the machine.
Next, read "7 Install the Software"...


(A)
(A)(B)
(C)
(D) (F)
(E)
123
21
This section explains how to 
load paper in the Cassette (A) 
and the Rear Tray (B).
The Cassette (A) supports plain 
paper (C) only. To print Photo 
Paper / Hagaki (D), be sure to 
load it in the Rear Tray (B).
L o a d   i n   t h e   C a s s e t t e
Move the Paper Guides (E) and (F) 
to both edges.
Pull out the Cassette (A).
Load paper.
Load paper with the printing side 
facing down.
•
Loading Paper
 

  
(F)(G)
A4
(E)
(A)
654
Insert the Cassette (A) into the machine 
until it clicks into place.
Slide the Paper Guide (F) against left edge of 
the paper.
Do not exceed the Load Limit Mark (G).
Slide the Paper Guide (E) to align 
with the mark of paper size.
The Paper Guide (E) will stop when it 
aligns with the corresponding mark of 
paper size.
There may be a little space between 
the Paper Guide (E) and the paper 
stack.
•
To print on speciality paper, be sure to load it in 
the Rear Tray.
•
 


(I)(I)
(H)
(I)
(J)
(I)
71098
21
L o a d   p a p e r   i n   t h e   R e a r  Tr a y
For details on media sizes and 
types you can use, refer to 
"Loading Paper" in the on-screen 
manual: Basic Guide.
•
Load paper in portrait 
orientation with the printing 
side facing up.
•
Machine installation is now complete!
Open the Paper Support (H) and pull it 
out.
Move the Paper Guides (I) to 
both edges.Load paper in the center of 
the Rear Tray.Slide the left and right Paper 
Guides (I)...