Canon Pixma Ip4850 User Guide

							3.Click Define Stamp...  
The Stamp Settings dialog box opens. 
4.Configure the stamp while viewing the preview window 
Stamp tab  
Select Text, Bitmap, or Date/Time/User Name that matches your purpose for Stamp Type. 
For Text registration, the characters must already be entered in Stamp Text. If necessary,
change the TrueType Font, Style, Size, and Outline se ttings. You can select the color of the
stamp by clicking Select Color.... 
For Bitmap, click Select File... and select the bitmap f ile (.bmp) to be used. If necessary,
change the settings of the Size and Transparent whi te area. 
For Date/Time/User Name, the creation date/time and  user name of the printed object are
displayed in Stamp Text. If necessary, change the setting s of TrueType Font, Style, Size, and
Outline. You can select the color of the stamp by clicking  Select Color.... 
Important 
Stamp Text appears grayed out and is unavailable when Date/Time/User Name is selected.
Placement tab  
Select the stamp position from the Position list. You can also select Custom from the Position
list and specify coordinates for X-Position and Y-P osition.
You can also change the stamp position by dragging  the stamp in the preview window.
To change the stamp position angle, type a value in th e Orientation box directly. 
5.Save the stamp  
Click the Save settings tab and enter a title in the Title box, and then click Save.
Click OK when the confirmation message appears. 
6.Complete the setup  
Click OK. The Stamp/Background (Stamp) dialog box o pens again.
The registered title appears in the Stamp list. 
Changing and Registering Some of Stamp Settings 
1.Select the stamp for which the settings are to be c hanged Page 281 of 468 pages
Registering a Stamp
.ownloadedtfromtManualsPrinterDcomtManuals  
						

							Check the Stamp check box in the Stamp/Background (Stamp) dialog box, and then select the title of
the stamp to be changed from the Stamp list. 
2.Click Define Stamp...  
The Stamp Settings dialog box opens. 
3.Configure the stamp while viewing the preview windo w 
4.Overwrite save the stamp  
Click Save overwrite on the Save settings tab. 
W hen you want to save the stamp with a different title, type a new title in the Title box and click Save.
Click OK when the confirmation message appears. 
5.Complete the setup  
Click OK. The Stamp/Background (Stamp) dialog box o pens again.
The registered title appears in the Stamp list. 
Deleting an Unnecessary Stamp 
1.Click Define Stamp... in the Stamp/Background (Stam p) dialog box 
The Stamp Settings dialog box opens. 
2.Select the stamp to be deleted  
Select the title of the stamp you want to delete from  the Stamps list on the Save settings tab. Then
click Delete. 
Click OK when the confirmation message appears. 
3.Complete the setup  
Click OK. The Stamp/Background (Stamp) dialog box o pens again. 
Page top
Page 282 of 468 pages
Registering a Stamp
.ownloadedtfromtManualsPrinterDcomtManuals 
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Stamp/Background Printing > Registering Image Data to be Used as a Background 
P405 
Registering Image Data to be Used as a Background 
This feature may be unavailable when certain printe r drivers are used. 
You can select a bitmap file (.bmp) and register it  as a new background. You can also change and
register some of the settings of an existing backgr ound. An unnecessary background can be deleted at
any time.  
The procedure for registering image data to be used  as a background is as follows: 
Registering New Background 
1.Open the printer driver setup window
2.
Click Stamp/Background... on the Page Setup tab 
The Stamp/Background dialog box opens. 
Note 
W ith the XPS printer driver, the Stamp/Background...  button has become the Stamp... buttonPage 283 of 468 pages
Registering Image Data to be Used as a Background
.ownloadedtfromtManualsPrinterDcomtManuals    
						

							and Background cannot be used. 
3.Click Select Background...  
The Background Settings dialog box opens. 
4.Select the image data to be registered to the background 
Click Select File.... Select the target bitmap file (. bmp), and then click Open. 
5.Specify the following settings while viewing the pr eview window 
Layout Method  
Select how the background image data is to be place d.
W hen Custom is selected, you can set coordinates fo r X-Position and Y-Position.
You can also change the background position by drag ging the image in the preview window. 
Intensity 
Set the intensity of the background image data with  the Intensity slider. To lighten the background,
move the slider to the left. To darken the background , move the slider to the right. To print the
background at the original bitmap intensity, move t he slider to the rightmost position. 
6.Save the background  
Click the Save settings tab and enter a title in the Title box, and then click Save.
Click OK when the confirmation message appears. 
7.Complete the setup  
Click OK. The Stamp/Background dialog box opens aga in.
The registered title appears in the Background list . 
Changing and Registering Some Background Settings 
1.Select the background for which the settings are to  be changed 
Check the Background check box in the Stamp/Backgro und dialog box, and then select the title of
the background you want to change from the Background  list. 
2.Click Select Background...  
The Background Settings dialog box opens. 
3.Specify the items on the Background tab while viewi ng the preview window Page 284 of 468 pages
Registering Image Data to be Used as a Background
.ownloadedtfromtManualsPrinterDcomtManuals  
						

							4.Save the background  
Click Save overwrite on the Save settings tab. W hen you want to save the background with a different
title, enter a new title in the Title box and click S ave.
Click OK when the confirmation message appears. 
5.Complete the setup  
Click OK. The Stamp/Background dialog box opens aga in.
The registered title appears in the Background list . 
Deleting an Unnecessary Background 
1.Click Select Background... in the Stamp/Background  dialog box 
The Background Settings dialog box opens. 
2.Select the background to be deleted  
Select the title of the background you want to dele te from the Backgrounds list on the Save settings
tab, and then click Delete. 
Click OK when the confirmation message appears. 
3.Complete the setup  
Click OK. The Stamp/Background dialog box opens aga in. 
Page top
Page 285 of 468 pages
Registering Image Data to be Used as a Background
.ownloadedtfromtManualsPrinterDcomtManuals 
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Printing an Envelope 
P406 
Printing an Envelope 
If you are using the XPS printer driver, replace Can on IJ Status Monitor with Canon IJ XPS Status
Monitor when reading this information.  
For details on how to load an envelope into the pri nter, refer to Loading Paper in the manual: Basic
Guide. 
The procedure for performing envelope printing is a s follows: 
1.Load an envelope into the printer  
Fold down the envelope flap.  
Orient the envelope so that the address side is on top and the flap is on the left, and then load the
envelope vertically in the rear tray. 
2.Open the printer driver setup window
3.
Select the media type  
Select Envelope from Commonly Used Settings on the  Quick Setup tab. 
4.Select the paper size  
W hen the Envelope Size Setting dialog box is displayed, select Comm.Env. #10, DL Env., Youkei 4Page 286 of 468 pages
Printing an Envelope
.ownloadedtfromtManualsPrinterDcomtManuals    
						

							105x235mm, or Youkei 6 98x190mm, and then click OK. 
5.Set the orientation  
To print the addressee horizontally, select Landscape for Orientation. 
6.Select the print quality  
Select High or Standard that matches your purpose for P rint Quality. 
7.Complete the setup  
Click OK. 
W hen you execute print, the information is printed on the envelope. 
Important 
W hen you execute envelope printing, guide messages  are displayed.
To hide the guide messages, check the Do not show t his message again. check box.
To show the guide again, click the View Printer Status. .. button on the Maintenance tab, and start the
Canon IJ Status Monitor. 
Then click Envelope Printing from Display Guide Mes sage of the Option menu, and change the
setting to on. 
Page top
Page 287 of 468 pages
Printing an Envelope
.ownloadedtfromtManualsPrinterDcomtManuals 
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Switching the Paper Source to Match the Purpose 
P008 
Switching the Paper Source to Match the Purpose 
In this printer, there are two paper sources, a rea r tray and a cassette.
You can facilitate printing by selecting a paper so urce setting that matches your print conditions or
purpose.  
The procedure for setting paper source is as follow s: 
You can also set the paper source on the Quick Setu p tab. 
1.Open the printer driver setup window
2.
Select the paper source  
From the Paper Source list on the Main tab, select  the paper source that matches your purpose. 
Automatically Select  
Plain paper whose Page Size is Letter 8.5x11, A5, A 4, or B5 is fed from the cassette. Other sizes of
plain paper and paper types other than plain paper ar e fed from the rear tray. 
Rear Tray  
Paper is always fed from the rear tray.  
Cassette  
Paper is always fed from the cassette. 
Important 
Plain paper that is not Letter 8.5x11, A5, A4, or  B5 and paper types other than plain paper
cannot be fed from the cassette. 
Continuous Autofeed  
W hen plain paper runs out in the specified paper so urce, the printer automatically switches the
paper source.  Page 288 of 468 pages
Switching the Paper Source to Match the Purpose
.ownloadedtfromtManualsPrinterDcomtManuals   
						

							W hen printing a large volume of data, load plain paper of the same size in both the rear tray and the
cassette. The printer then automatically switches t he paper source when paper runs out in one
paper source, thus reducing the work of reloading p aper. 
Important 
Continuous Autofeed is unavailable when paper other  than Plain Paper is selected for Media
Type. 
Since the printer feeds paper from the paper source  that was being used the last time
Continuous Autofeed was selected and printing ended , load the same paper in both the rear
tray and the cassette. 
Paper Allocation  
W hen the media type for the print data is plain pap er and the paper size matches the paper
allocation setting, the printer automatically feeds  paper from the cassette. If not, the printer feeds
paper from the rear tray.  
To change the paper allocation settings, click Pape r Allocation..., specify the Paper Size to be loaded
in the cassette, and then click OK.  
W hen you load frequently used plain paper in the ca ssette, the printer feeds other types of paper
from the rear tray, thus reducing the work of reloadi ng paper. 
3.Complete the setup  
Click OK. 
W hen you execute print, the printer uses the specif ied paper source to print the data. 
Page top
Page 289 of 468 pages
Switching the Paper Source to Match the Purpose
.ownloadedtfromtManualsPrinterDcomtManuals 
						

							Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Displaying the Print Results before Printing 
P009 
Displaying the Print Results before Printing 
If you are using the XPS printer driver, replace Can on IJ Status Monitor with Canon IJ XPS Status
Monitor when reading this information.  
You can display and check the print result before p rinting. 
The procedure for displaying the print result befor e printing is as follows: 
You can also set the print results display on the Q uick Setup tab. 
1.Open the printer driver setup window
2.
Set the preview  
Check the Preview before printing check box on the Mai n tab. 
3.Complete the setup  
Click OK. 
W hen you execute print, the Canon IJ Preview opens and displays the print results. 
Related Topic 
Canon IJ Preview
Page top
Page 290 of 468 pages
Displaying the Print Results before Printing
.ownloadedtfromtManualsPrinterDcomtManuals