Canon Pixma Ip4850 User Guide

							color tone are adjusted in the Advanced Adjustment dialog box.
Defaults Resets each adjustment (brightness, contrast, sharp ness, blur, and show-through removal).
Reset Selected Image
Cancels all corrections, enhancements and adjustmen ts applied to the selected image.
Save Selected Image
Saves the corrected/enhanced/adjusted image (the se lected one).
Save All Corrected Images
Saves all the corrected/enhanced/adjusted images di splayed in the thumbnail list.
Exit
Click to close the Correct/Enhance Images window.
Correct/Enhance
Red-Eye Correction Corrects red eyes in the selected area. 
You can adjust the effect level using the slider.
Note
For Photo Print, red eyes are automatically corrected whe n printing by selecting Enable Auto
Photo Fix in Color correction for printing on the Adv anced tab of the Preferences dialog box and
selecting the Enable Red-Eye Correction checkbox. T o correct manually, deselect the
checkbox.
Face Brightener Corrects the entire image to brighten the facial ar ea in and around the selected area.
You can adjust the effect level using the slider.
Face Sharpener
Corrects the entire image to sharpen the facial are a in and around the selected area.
You can adjust the effect level using the slider.
Digital Face Smoothing
Enhances skin beautifully by removing blemishes and  wrinkles in the selected area.
You can adjust the effect level using the slider.
Blemish Remover Page 181 of 468 pages
Correct/Enhance Images Window
.ownloadedtfromtManualsPrinterDcomtManuals  
						

							Removes moles in the selected area.
OK
Applies the selected effect to the specified area.
Undo
Cancels the latest correction/enhancement.
Reset Selected Image
Cancels all corrections, enhancements and adjustmen ts applied to the selected image.
Save Selected Image
Saves the corrected/enhanced/adjusted image (the se lected one).
Save All Corrected Images
Saves all the corrected/enhanced/adjusted images di splayed in the thumbnail list.
Exit
Click to close the Correct/Enhance Images window.
(2) Toolbar
Toolbar
 (Zoom In/Zoom Out)
Displays the enlarged or reduced preview of the ima ge.
 (Full Screen)
Displays the entire image in Preview.
 (Compare)
Displays the Compare Images window. You can compare  the images before and after the correction/
enhancement/adjustment side by side. 
The image before the correction/enhancement/adjustm ent is displayed on the left, and the image
after the correction/enhancement/adjustment is disp layed on the right.
Page top
Page 182 of 468 pages
Correct/Enhance Images Window
.ownloadedtfromtManualsPrinterDcomtManuals  
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating Still Images from
Videos
A160 
Creating Still Images from Videos
You can capture video frames and create still image s.
Important
This function is supported under W indows XP or late r. However, it is not supported under the 64-bit
editions of W indows XP.
This function is not available when ZoomBrowser EX  Ver.6.5 or later (supplied with Canon digital
cameras supporting MOV format video recording) is n ot installed.
Videos may not play smoothly depending on your envi ronment.
W hen the color tone of a video is changed via the settings of the graphic driver (video card) or its
utility, such a change is not reflected in still im ages captured from the video. Therefore, color tone s
may differ between videos and captured still images .
1.In the Select Images screen, click  (Capture frames from video).
The Video Frame Capture window and Select Video dia log box appear.
Note
You can also display the Video Frame Capture window by clicking  (Capture frames from
video) in the Add Image dialog box. To display the A dd Image dialog box, select the page you
want to add images to in the Edit screen, then click  (Add Image).
See Video Frame Capture/Movie Print W indow for details on the Video Frame Capture
window.
2.In the Select Video dialog box, select the folder contai ning the video from which you
want to capture still images.
The videos in the folder will be displayed as thumbnails (miniatures). Page 183 of 468 pages
Creating Still Images from Videos
.ownloadedtfromtManualsPrinterDcomtManuals   
						

							Note
Only MOV format videos recorded with Canon digital cameras are displayed.
The selected video plays.
3.Select the video from which you want to capture sti ll images and click OK.
The selected video plays in Preview of the Video Fr ame Capture window.
Note
 (Pause) appears while a video plays, and  (Playback) appears while a
video is stopped.
Use  (Pause) and  (Frame backward/Frame advance) to display
the frame you want to capture.
4.Display the frame you want to capture and click  (Capture).
The captured still image is displayed in the Captur ed frame(s) area.
Important
You can capture up to 150 frames from one video.
5.Select the image(s) you want to save and click Save .
W hen the Save dialog box appears, specify the save locat ion and file name, then click Save.
Note
Only JPEG/Exif data format is available for saving created still images.
6.Click Exit.
Important
The captured still images will be deleted if you exit before saving them.
Note
You can automatically capture multiple still images  from a video. Page 184 of 468 pages
Creating Still Images from Videos
.ownloadedtfromtManualsPrinterDcomtManuals  
						

							Display the Auto Frame Capture Settings area, then use  (Set start time/Set end time) in
the Preview area to specify the time range. In the Auto  Frame Capture Settings area, select a
capture method and click Capture.
You can correct the captured still images in the Co rrect Captured Frames window. To display the
Correct Captured Frames window, select the image(s)  you want to correct in the Captured frame(s)
area, then click 
 (Correct image).
W hen the Movie Print window is displayed via Solution  Menu EX, you can print the captured still
images.
To print, specify the printer and media in the Print area, then click Print.
W hen you print from the Movie Print window, images a re automatically cropped. Therefore,
images will be printed with the left and right side s cut off.
If you want to adjust the cropping area before printin g, save the captured still image and print it
from a function of Easy-PhotoPrint EX.
The saved still images can be used along with other  images to create albums, calendars, etc. in
Easy-PhotoPrint EX.
Page top
Page 185 of 468 pages
Creating Still Images from Videos
.ownloadedtfromtManualsPrinterDcomtManuals 
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating Still Images from
Videos
 > Video Frame Capture/Movie Print W indow
A161 
Video Frame Capture/Movie Print Window
You can capture video frames and create still image s in these windows.
In the Movie Print window, you can print the captured  still images.
Important
This function is supported under W indows XP or late r. However, it is not supported under the 64-bit
editions of W indows XP.
This function is not available when ZoomBrowser EX  Ver.6.5 or later (supplied with Canon digital
cameras supporting MOV format video recording) is n ot installed.
W hen the color tone of a video is changed via the settings of the graphic driver (video card) or its
utility, such a change is not reflected in still im ages captured from the video. Therefore, color tone s
may differ between videos and captured still images .
To display the Video Frame Capture window, click 
 (Capture frames from video) in the Select Images
screen or Add Image dialog box. To display the Add  Image dialog box, select the page you want to add
images to in the Edit screen, then click 
 (Add Image).
To display the Movie Print window, select Photo Print  in Solution Menu EX and click the Movie Print icon.
Note
The Movie Print window displayed via Solution Menu  EX is used as an example in the following
descriptions. The window displayed varies depending  on how Easy-PhotoPrint EX is started.
(1) Settings and Operation Buttons Area
(2) Preview Area
(3) Captured Frame(s) Area
(1) Settings and Operation Buttons Area
Page 186 of 468 pages
Video Frame Capture/Movie Print Window
.ownloadedtfromtManualsPrinterDcomtManuals   
						

							Print Area
You can print the captured still images.
Note
This function is available only when the Movie Print window is displayed via Solution Menu EX.
Media Type Displays the media type specified in the Print Sett ings dialog box.
Page Size
Displays the paper size specified in the Print Sett ings dialog box.
Print Settings Displays the Print Settings dialog box in which you  can make the basic print settings (select printer/
media, etc.).
Print
Starts printing the still images selected in the Ca ptured frame(s) area.
Auto Frame Capture Settings Area 
You can capture multiple still images according to  the settings.
Note
Use  (Down arrow/Up arrow) to show/hide the Auto Frame  Capture Settings area.
Start time/End time Displays the start/end time of the time range from  which to capture still images.
Total captures
Displays the number of still images to be captured.
Capture Method
Select from All frames, frame(s), sec. int. and frame in t..
Capture Captures still images according to the settings. 
You can capture up to 150 frames at a time from one vi deo.Page 187 of 468 pages
Video Frame Capture/Movie Print Window
.ownloadedtfromtManualsPrinterDcomtManuals   
						

							Select VideoDisplays the Select Video dialog box. 
Select a folder, then select the video from which y ou want to capture still images.
Save
Saves the still images selected in the Captured fra me(s) area.
Exit
Click to close the Video Frame Capture/Movie Print win dow.
(2) Preview Area
The video selected in the Select Video dialog box appears in Preview.
 (Frame backward/Frame advance)
Click to reverse/advance one frame and pause. 
You can also click during playback to reverse/advan ce one frame and pause.
 (Playback/Pause)
Plays or pauses the video.
 (Pause) appears while a video plays, and  (Playback) appears while a video
is stopped.
 (Stop)
Stops the video.
 (Capture)
Captures the current frame and displays the still i mage in the Captured frame(s) area.
You can also capture during playback.
 (Mute/Clear mute)
Switches audio OFF/ON.
 Playback Slider
Displays the video playback progress. 
Current playback time is displayed to the left of t he slider.
 (Set start time/Set end time)
Set the start/end time of the time range from which  to capture still images automatically.
Note
These buttons are displayed only when the Auto Fram e Capture Settings area is displayed.
 Time Range Slider
Displays the time range set with 
 (Set start time/Set end time).
You can also set the start/end time by moving 
 (Start/End point) located below the slider.
Note
This slider is displayed only when the Auto Frame C apture Settings area is displayed.
(3) Captured Frame(s) Area
Displays the thumbnails of the captured still images.
Double-click a thumbnail image to display the Zoom  In window in which you can check the details of the
image.
 (Select all frames)
Selects all the images displayed in the Captured fr ame(s) area. Page 188 of 468 pages
Video Frame Capture/Movie Print Window
.ownloadedtfromtManualsPrinterDcomtManuals 
						

							W hen you select an image, a checkmark appears in its checkbox.
 (Clear all check-marks)
Cancels all image selections in the Captured frame( s) area.
 (Correct image)
Displays the Correct Captured Frames window in whic h you can correct all the images selected in
the Captured frame(s) area.
Note
W hen a frame in which the subject or camera has mov ed significantly is captured, the image
may not be corrected properly.
(1) Task Area 
Noise Reduction
Reduces noise (tonal variation that may appear in i mages taken in dark locations such as night
scenes using a digital camera). 
Enhance resolutions
Select this checkbox to reduce the jaggies (roughne ss) in images.
Apply to all frames
Select this checkbox to correct all the images disp layed in the thumbnail list.
OK
Applies Noise Reduction to the selected images or a ll images. Noise will be reduced to make
the images more vivid.
Note
Correction may take time depending on your environm ent.
W hen the Enhance resolutions checkbox is selected, Noise Reduction and Enhance
resolutions are applied simultaneously.
Reset Selected Frames
Cancels all corrections applied to the selected ima ges.
Exit
Closes the Correct Captured Frames window and retur ns to the Video Frame Capture or Movie
Print window. 
Source images will be overwritten by the corrected  ones.Page 189 of 468 pages
Video Frame Capture/Movie Print Window
.ownloadedtfromtManualsPrinterDcomtManuals  
						

							(2) Toolbar
 (Reduce/Enlarge frame)
Reduces or enlarges the displayed image.
 (Whole frame)
Displays the entire image in Preview.
 (Compare)
Displays the Compare Captured Frames window. You ca n compare the images before and after
the correction side by side. 
The image before the correction is displayed on the  left, and the image after the correction is
displayed on the right of the window.
Sort by Time
Displays the captured still images in the order of  the time code.
Note
See Creating Still Images from Videos for details on how to create still images from videos.
Page top
Page 190 of 468 pages
Video Frame Capture/Movie Print Window
.ownloadedtfromtManualsPrinterDcomtManuals