Canon Pixma Ip2850 User Guide

							1200Cause
The cover is open.
Action Close the cover and wait for a while.291
 
						

							1203Cause
The cover is opened while printing is in progress.
Action If paper is left inside the printer, remove the paper slowly with both hands and close the cover.
Press the printer's  ON/RESUME button to dismiss the error.
The printer ejects one blank sheet of paper and resumes printing from the next paper. The printer will not reprint the page that was printed when the cover is opened. Try printing again.
Important
•
Do not open or close the cover while printing is in progress, as this can damage the printer.
292
 
						

							1401Cause
The FINE cartridge is not installed.
ActionInstall the FINE cartridge.
If the error is not resolved, the FINE cartridge may be damaged. Contact the service center.293
 
						

							1403Cause
The FINE cartridge cannot be recognized.
Action Replace the FINE cartridge.
If the error is not resolved, the FINE cartridge may be damaged. Contact the service center.294
 
						

							1485Cause
Appropriate ink cartridge is not installed.
Action Printing cannot be executed because the ink cartridge is not compatible with this printer.
Install the appropriate ink cartridge.
If you want to cancel printing, press the printer's  ON/RESUME button.295
 
						

							1682Cause
The FINE cartridge cannot be recognized.
Action Replace the FINE cartridge.
If the error is not resolved, the FINE cartridge may be damaged. Contact the service center.296
 
						

							1684Cause
The ink cartridge cannot be recognized.
Action Printing cannot be executed because the ink cartridge may not be installed properly or may not be
compatible with this printer.
Install the appropriate ink cartridge.
If you want to cancel printing, press the printer's  ON/RESUME button.297
 
						

							1686Cause
The ink may have run out.
Action The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly
detected.
If you want to continue printing without this function, press the printer's  ON/RESUME button for at least 5
seconds.
Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities.
Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of
printing under the ink out condition.298
 
						

							1687Cause
The FINE cartridge is not installed properly.
Action
Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges.
Then install the FINE cartridges again. Push the FINE cartridge until it clicks into place.
After installing, close the cover.
299
 
						

							1688Cause
The ink has run out.
Action
Replace the ink cartridge and close the cover.
If printing is in progress and you want to continue printing, press the printer's  ON/RESUME button for at
least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.
The function for detecting the remaining ink level will be disabled.
Replace the empty ink cartridge immediately after the printing. The resulting print quality is not
satisfactory, if printing is continued under the ink out condition.300