Canon Lbp 5200 User Guide

Printing from a Network Computer using a Shared Printer3-66
Setting Up the Printing Environment
3
2Right-click the icon for the printer, then select [Sharing] from 
the pop-up menu.
3Select [Share this printer]. Change the share name if required.
For Windows 2000: Select [Shared as].
NOTE
•You can also specify the sharing settings during the local installation.
•Do not enter blank or special characters in the share name.
 

Printing from a Network Computer using a Shared Printer3-67
Setting Up the Printing Environment
3
4Click [Additional Drivers].
The [Additional Drivers] dialog box is displayed.
5Place a checkmark next to [Windows 95, 98 and Me], then 
click [OK].
For Windows 2000: Place a checkmark next to [Windows 95 or 98], and then 
click [OK].
6Insert the supplied LBP5200 User Software CD-ROM into 
the CD-ROM drive.
If the [Insert Disk] dialog box appears, click [OK].
 

Printing from a Network Computer using a Shared Printer3-68
Setting Up the Printing Environment
3
7Click [Browse]. If your CD-ROM drive is drive [D:], select 
[D:\English\Win98_Me], and then click [OK].
Windows will begin copying files.
8Click [OK].
The printer icon changes to the shared printer icon.
IMPORTANT
Select [Do not share this printer] on the [Sharing] sheet to clear the printer share 
settings. If you are clearing printer share settings on an operating system equipped 
with Windows Firewall,...

Printing from a Network Computer using a Shared Printer3-69
Setting Up the Printing Environment
3
■Configuring Windows  Firewall
If you are using an operating system equipped with Windows Firewall, such as Windows 
XP Service Pack 2, as a print server, you need to configure Windows Firewall to allow 
communication with the client computers.
Use the following procedure to ensure that Windows Firewall does not block this 
communication.
•If you installed the CAPT software from CD-ROM Setup, a [Warning]...

Printing from a Network Computer using a Shared Printer3-70
Setting Up the Printing Environment
3
Installing the Client
This section describes the procedure for installing the printer driver on a client 
computer.
There are two ways to install the printer driver: local installation and download 
installation.
■Local Installation (See p. 3-71)
This installs the printer driver using the supplied CD-ROM.
■Download and Install
This installs the printer driver by downloading it from the print server, without...

Printing from a Network Computer using a Shared Printer3-71
Setting Up the Printing Environment
3
NOTE
•Clients can use both Windows 98/Me and Windows 2000/XP/Server 2003.
•If your print server is Windows 98/Me, you cannot download and install on Windows 
2000/XP/Server 2003.
•The screen shots shown in this section are taken from Windows XP Professional.
Installing from CD-ROM Setup
1Insert the supplied LBP5200 User Software CD-ROM into 
the CD-ROM drive.
If the CD-ROM is already in the drive, eject the...

Printing from a Network Computer using a Shared Printer3-72
Setting Up the Printing Environment
3
After the preparation for installation is complete, the CAPT (Canon Advanced 
Printing Technology) software installer starts up, and the [Setup Wizard] dialog 
box appears.
4Click [Next].
The [License Agreement] dialog box is displayed.
5Check the contents of the agreement and select [I accept the 
terms in the license agreement], and then click [Next].
 

Printing from a Network Computer using a Shared Printer3-73
Setting Up the Printing Environment
3
6If the box for [Install Printer driver through a USB Connection] 
is checked, uncheck the box, then click [Next].
NOTE
Do not select [Install Printer Driver through a USB Connection].
7Set [Port Settings] to [Use Network Printer], then click 
[Settings].
 

Printing from a Network Computer using a Shared Printer3-74
Setting Up the Printing Environment
3
8Select the directory of the print server, then click [OK].
9Select whether or not to use this printer as the default printer, 
then click [Next].
10Click [Start].
 

Printing from a Network Computer using a Shared Printer3-75
Setting Up the Printing Environment
3
If you are using an operating system equipped with Windows Firewall, such as 
Windows XP Service Pack 2, the following window is displayed. Click [No].
You should only choose [Yes] if the computer you are currently installing is a print 
server.
11The message [Unable to cancel setup after setup is started. 
Are you sure you want to start setup now?] is displayed. Click 
[Yes].
The installation of the printer...