Canon Lbp 5200 User Guide

Installing the CAPT Software3-46
Setting Up the Printing Environment
3
4Click [Add a printer].
For Windows Server 2003: Double-click [Add Printer].
The [Add Printer Wizard] dialog box is displayed.
5Click [Next].
 

Installing the CAPT Software3-47
Setting Up the Printing Environment
3
6Make sure that [Local printer attached to this computer] is 
selected, then click [Next].
NOTE
Do not select [Automatically detect and install my Plug and Play printer].
7Make sure that [Use the following port] is selected, then select 
the USB port that you will connect the printer to and click 
[Next].
 

Installing the CAPT Software3-48
Setting Up the Printing Environment
3
8Click [Have Disk].
9Insert the supplied LBP5200 User Software CD-ROM into 
the CD-ROM drive, then click [Browse].
If CD-ROM Setup appears, click [Exit].
 

Installing the CAPT Software3-49
Setting Up the Printing Environment
3
10Select [D:\English\Win2K_XP]. Select [CNAC3STK.INF] and 
click [Open].
In this case the CD-ROM drive is assumed to be assigned to D:. The actual 
CD-ROM drive letter may be different depending on the computer you are using.
11Confirm the path shown in the [Copy manufacturers files 
from] field, then click [OK].
For example, [D:\English\Win2K_XP] is displayed when the CD-ROM drive is 
drive [D:].
Canon LBP5200 is displayed in the [Add...

Installing the CAPT Software3-50
Setting Up the Printing Environment
3
12Click [Next].
13Enter a new name in the [Printer name] field if you want to 
change the name of the printer, then click [Next].
If another printer driver has already been installed in the computer, the message 
Do you want your Windows-based programs to use this printer as the default 
printer? appears. In this case, select [Yes] or [No].
 

Installing the CAPT Software3-51
Setting Up the Printing Environment
3
14Click [Next].
NOTE
If you want to share the printer over the network, select [Share name] and click 
[Next]. A screen is displayed that allows you to enter a [Location] and [Comment] 
for the printer. Enter this information as required and click [Next].
15If you want to print a test page, select [Yes], then click [Next].
 

Installing the CAPT Software3-52
Setting Up the Printing Environment
3
16Click [Finish].
Windows will begin copying files.
If you chose to print a test page, a dialog box is displayed after the page finishes 
printing. Click [OK] to close the dialog box.
NOTE
If the [Hardware Installation] dialog box appears, click [Continue Anyway].
17If the printer is not connected to the computer, connect it 
using a USB cable and turn the printer on.
IMPORTANT
If you are using an operating system equipped with Windows...

After Completing Installation3-53
Setting Up the Printing Environment
3
After Completing Installation
When the installation of the CAPT software is complete, an icon and folder will be 
created for the printer.
■For Windows  98/Me/2000
•The icon for the printer is displayed in the [Printers] folder.
•[Canon Printer Uninstaller] is added to [Programs] under the [Start] menu.
 

After Completing Installation3-54
Setting Up the Printing Environment
3
■For Windows XP/Server 2003
•The icon for the printer is displayed in the [Printers and Faxes] folder.
•[Canon Printer Uninstaller] is added to [All Programs] under the [Start] menu.
 

Printing a Test Page3-55
Setting Up the Printing Environment
3
Printing a Test Page
Before using the printer for the first time, be sure to print a test page using the 
following procedure.
NOTE
The screen shots shown here are taken from Windows XP Professional.
1Open the [Printers] folder or [Printers and Faxes] folder.
For Windows 98/Me/2000: Select [Settings] ➞ [Printers] from the [Start] menu.
For Windows XP Professional/Server 2003: Select [Printers and Faxes] from the 
[Start] menu.
For Windows XP...