Canon Lbp 5200 User Guide

Installing the CAPT Software3-6
Setting Up the Printing Environment
3
For Windows 98/Me
The example screen shots shown in this section are from Windows Me.
Installing from CD-ROM Setup
1Make sure that the printer is turned off and that the computer 
and printer are not connected with a USB cable.
IMPORTANT
•At some point during the installation procedure (step 10 ➞ p. 3-8) you will need to 
connect the USB cable and turn the printer on.
•If the Plug and Play automatic setup wizard appears, click [Cancel]...

Installing the CAPT Software3-7
Setting Up the Printing Environment
3
A dialog box is displayed to confirm the language.
5Check that the language is correct and click [Yes].
After the preparation for installation is complete, the CAPT (Canon Advanced 
Printing Technology) software installer starts up, and the [Setup Wizard] dialog 
box appears.
6Click [Next].
The [License Agreement] dialog box is displayed.
7Confirm the contents and select [I accept the terms in the 
license agreement], and then click...

Installing the CAPT Software3-8
Setting Up the Printing Environment
3
8Select the [Install Printer Driver through a USB Connection] 
checkbox, then click [Next].
Depending on your system, a message may appear prompting you to restart your 
computer. If this happens, restart the computer before continuing with the 
installation.
9The message [Unable to cancel setup after setup is started. 
Are you sure you want to start setup now?] is displayed. Click 
[Yes].
10When the following window is displayed,...

Installing the CAPT Software3-9
Setting Up the Printing Environment
3
Connect the printer to the computer using the USB cable.
Press the power switch to turn the printer on.
Installation of the USB class driver and the printer driver starts automatically.
NOTE
If the computer does not automatically recognize the printer after you connect the 
USB cable, refer to Installation Problems, on p. 7-41.
11Once the installation complete screen is displayed, select 
[Yes, I want to restart my computer now.] and...

Installing the CAPT Software3-10
Setting Up the Printing Environment
3
Windows will restart.
This completes the installation of the USB class driver and printer driver.
Installing with Plug and Play
IMPORTANT
Before using Plug and Play to install the CAPT software, make sure that the printer is 
properly connected to the computer and that the printer is turned on.
1Turn the computer on and start up Windows 98/Me.
The [Add New Hardware Wizard] dialog box appears.
●For Windows  Me
If the following dialog...

Installing the CAPT Software3-11
Setting Up the Printing Environment
3
●For Windows  98
If the following dialog box appears, click [Next], then proceed to Step 2.
If the following dialog box appears, click [Next], then proceed to Step 9.
2Select [Specify the location of the driver (Advanced)], then 
click [Next].
For Windows 98: Select [Search for the best driver for your device. 
(Recommended)], then click [Next].
A dialog box is displayed that allows you to specify the places to search.
 

Installing the CAPT Software3-12
Setting Up the Printing Environment
3
3Insert the supplied LBP5200 User Software CD-ROM into 
the CD-ROM drive.
If CD-ROM Setup appears, click [Exit].
4Select [Search for the best driver for your device. 
(Recommended).] and clear the checkmark next to 
[Removable Media (Floppy, CD-ROM...)], then select [Specify a 
location].
For Windows 98: Clear the checkmarks from [Floppy disk drives] and [CD-ROM 
drive], then select [Specify a location].
5Click [Browse], then select a...

Installing the CAPT Software3-13
Setting Up the Printing Environment
3
6Make sure that the correct path is shown in the [Specify a 
location] field, and then click [Next].
7Click [Next].
Installation of the USB class driver starts.
8Click [Finish]
The computer automatically detects the printer. Please wait a moment.
 

Installing the CAPT Software3-14
Setting Up the Printing Environment
3
The [Add New Hardware Wizard] dialog box is displayed. For Windows 98, click 
[Next].
9Select [Specify the location of the driver (Advanced)], then 
click [Next].
For Windows 98: Select [Search for the best driver for your device. 
(Recommended)], then click [Next].
A dialog box is displayed that allows you to specify the places to search.
10If the supplied LBP5200 User Software CD-ROM is not in the 
CD-ROM drive, insert the LBP5200...

Installing the CAPT Software3-15
Setting Up the Printing Environment
3
11Select [Search for the best driver for your device. 
(Recommended).] and clear the checkmark next to 
[Removable Media (Floppy, CD-ROM...)], then select [Specify a 
location].
For Windows 98: Clear the checkmarks from [Floppy disk drives] and [CD-ROM 
drive], then select [Specify a location].
12Click [Browse], then select a folder.
Select [D:\English\Win98_Me], and then click [OK].
In this case the CD-ROM drive is assumed to be...