Canon Lbp 3000 User Guide

Installing the CAPT Software3-14
Setting Up the Printing Environment
3
5Press the   side of the power switch to turn the printer on.
6Turn the computer on and start up Windows 98/Me.
The [Add New Hardware Wizard] dialog box appears.
●For Windows  Me
If the following dialog box appears, proceed to Step 7.
If the following dialog box appears, proceed to Step 14.
 

Installing the CAPT Software3-15
Setting Up the Printing Environment
3
●For Windows  98
If the following dialog box appears, click [Next], then proceed to Step 7.
If the following dialog box appears, click [Next], then proceed to Step 14.
7Select [Specify the location of the driver (Advanced)], then 
click [Next].
For Windows 98: Select [Search for the best driver for your device. 
(Recommended)], then click [Next].
A dialog box is displayed that allows you to specify the search location.
 

Installing the CAPT Software3-16
Setting Up the Printing Environment
3
8Insert the supplied LBP3000 User Software CD-ROM into 
the CD-ROM drive.
If CD-ROM Setup appears, click [Exit].
9Select [Search for the best driver for your device. 
(Recommended).], remove the checkmark from [Removable 
Media (Floppy, CD-ROM...)], place a checkmark next to 
[Specify a location].
For Windows 98: Remove the checkmarks from [Floppy disk drives] and 
[CD-ROM drive], place a checkmark next to [Specify a location]....

Installing the CAPT Software3-17
Setting Up the Printing Environment
3
11Make sure that the correct path is displayed in the [Specify a 
location] field, and then click [Next].
12Click [Next].
Installation of the USB class driver starts.
13Click [Finish].
The computer automatically detects the printer. Please wait a moment.
 

Installing the CAPT Software3-18
Setting Up the Printing Environment
3
The [Add New Hardware Wizard] dialog box appears.
For Windows 98, click [Next].
14Select [Specify the location of the driver (Advanced)], then 
click [Next].
For Windows 98: Select [Search for the best driver for your device. 
(Recommended)], then click [Next].
A dialog box is displayed that allows you to specify the search location.
15If the supplied LBP3000 User Software CD-ROM is not in the 
CD-ROM drive, insert the LBP3000 User...

Installing the CAPT Software3-19
Setting Up the Printing Environment
3
16Select [Search for the best driver for your device. 
(Recommended).], remove the checkmark from [Removable 
Media (Floppy, CD-ROM...)], place a checkmark next to 
[Specify a location].
For Windows 98: Remove the checkmarks from [Floppy disk drives] and 
[CD-ROM drive], place a checkmark next to [Specify a location].
17Click [Browse], and then select a folder.
Select [D:\English\Win98_Me], and then click [OK].
In this case the CD-ROM...

Installing the CAPT Software3-20
Setting Up the Printing Environment
3
18Make sure that the correct path is displayed in the [Specify a 
location] field, and then click [Next].
19Click [Next].
20Enter a new name in the [Printer name] field if you want to 
change the name of the printer.
If another printer driver has been already installed in the computer, the message 
[Do you want your Windows-based programs to use this printer as the default 
printer?] appears. In this case, select [Yes] or [No].
 

Installing the CAPT Software3-21
Setting Up the Printing Environment
3
21Click [Finish].
Windows will begin copying files.
22Once the installation complete dialog is displayed, click [OK].
23Click [Finish].
This completes the installation of the USB class driver and printer driver.
For Windows 2000
1Make sure that the computer and printer are turned off at the 
power.
 

Installing the CAPT Software3-22
Setting Up the Printing Environment
3
2Open the USB cover.
3Connect the B-type (square) end of the USB cable to the USB 
connector on the rear side of the printer, and close the USB 
cover.
 

Installing the CAPT Software3-23
Setting Up the Printing Environment
3
4Connect the A-type (flat) end of the USB cable to the USB port 
on the computer.
5Press the   side of the power switch to turn the printer on.
6Turn the computer on and start up Windows 2000.
7Log on as a user who is a member of the Administrators 
group.
The [Found New Hardware Wizard] dialog box appears.
NOTE
Full Control Permissions are required for the installation of the printer driver.