Canon Lbp 3000 User Guide

Installing the CAPT Software3-24
Setting Up the Printing Environment
3
8Click [Next].
9Select [Search for a suitable driver for my device 
(recommended)], then click [Next].
NOTE
[Unknown] may be displayed as the name of the device.
 

Installing the CAPT Software3-25
Setting Up the Printing Environment
3
10Remove the checkmarks from [Floppy disk drives] and 
[CD-ROM drives], place a checkmark next to [Specify a 
location], and then click [Next].
11Insert the supplied LBP3000 User Software CD-ROM into 
the CD-ROM drive, then click [Browse].
If CD-ROM Setup appears, click [Exit].
 

Installing the CAPT Software3-26
Setting Up the Printing Environment
3
12Select [D:\English\Win2K_Vista]. Select [CNAB3STK.INF] and 
click [Open].
In this case the CD-ROM drive is assumed to be assigned to D:. The actual 
CD-ROM drive letter may be different depending on the computer you are using.
13Make sure that the correct path is displayed in the [Copy 
manufacturers files from] field, then click [OK].
A dialog box is displayed when the computer finishes searching for the driver files.
 

Installing the CAPT Software3-27
Setting Up the Printing Environment
3
14Click [Next].
Windows will begin copying files.
When it has finished, the [Completing the Found New Hardware Wizard] dialog is 
displayed.
NOTE
If the [Digital Signature Not Found] dialog box appears, click [Yes].
15Click [Finish].
Installation of the USB class driver (supplied with OS) and the printer driver starts 
automatically.
 

Installing the CAPT Software3-28
Setting Up the Printing Environment
3
For Windows XP/Server 2003
The screen shots used in this section are from Windows XP.
1Make sure that the computer and printer are turned off at the 
power.
2Open the USB cover.
 

Installing the CAPT Software3-29
Setting Up the Printing Environment
3
3Connect the B-type (square) end of the USB cable to the USB 
connector on the rear side of the printer, and close the USB 
cover.
4Connect the A-type (flat) end of the USB cable to the USB port 
on the computer.
 

Installing the CAPT Software3-30
Setting Up the Printing Environment
3
5Press the   side of the power switch to turn the printer on.
6Turn the computer on and start up Windows XP/Server 2003.
7Log on as a user who is a member of the Administrators 
group.
The [Found New Hardware Wizard] dialog box appears.
NOTE
Full Control Permissions are required for the installation of the printer driver.
8Insert the LBP3000 User Software CD-ROM into the CD-ROM 
drive. Select [Install from a list or specific location...

Installing the CAPT Software3-31
Setting Up the Printing Environment
3
9Select [Search for the best driver in these locations.], remove 
the checkmark from [Search removable media (floppy, 
CD-ROM...)], place a checkmark next to [Include this location 
in the search].
10Click [Browse], and then select a folder.
Select [D:\English\Win2K_Vista], and then click [OK].
In this case the CD-ROM drive is assumed to be assigned to D:. The actual 
CD-ROM drive letter may be different depending on the computer you...

Installing the CAPT Software3-32
Setting Up the Printing Environment
3
11Make sure that the correct path is displayed in the [Include 
this location in the search] field, then click [Next].
The installation progress is displayed.
After this, the [Completing the Found New Hardware Wizard] dialog is displayed.
NOTE
If the [Hardware Installation] dialog box appears, click [Continue Anyway].
12Click [Finish].
IMPORTANT
If you are using Windows XP Service Pack 2 or another operating system equipped 
with...

Installing the CAPT Software3-33
Setting Up the Printing Environment
3
For Windows Vista
1Make sure that the printer and computer are OFF.
2Open the USB cover.
3Connect the B-type (square) end of the USB cable to the USB 
connector on the rear side of the printer, and close the USB 
cover.