Canon Lbp 3000 User Guide

Printing on Plain Paper, Heavy Paper, Label Paper, and Transparencies2-22
Loading and Delivering Paper
2
NOTE
To print on letterhead paper or paper with a logo already printed on it, load the 
paper so that the printed side is facing up and the top of the paper is at the far end.
3Slide the paper guides to fit both sides of the stack.
 

Printing on Plain Paper, Heavy Paper, Label Paper, and Transparencies2-23
Loading and Delivering Paper
2
IMPORTANT
•If you run out of paper and then refill the paper tray, the Paper Indicator will flash. 
Press the   (Paper Key) to resume printing.
•Always make sure the paper guides match the width of the paper. If the paper 
guides are too loose or too tight, the paper will not feed properly and this will cause 
paper jams.
Selecting Printer Driver Settings and Printing
This section describes how to...

Printing on Plain Paper, Heavy Paper, Label Paper, and Transparencies2-24
Loading and Delivering Paper
2
2Display the [Page Setup] sheet, then set the [Page Size] 
setting to the size of the document that you created in the 
application.
3Set the [Output Size] setting to the size of the paper loaded in 
the printer as needed.
Select [A4] or [Letter] if you are printing transparencies or labels.
Leave the setting set to [Match Page Size] when the page size and the size of 
the paper loaded in the...

Printing on Plain Paper, Heavy Paper, Label Paper, and Transparencies2-25
Loading and Delivering Paper
2
IMPORTANT
If the [Page Size] and [Output Size] settings are different, the printer produces an 
enlarged or reduced print automatically.
4Display the [Paper Source] sheet, and set the [Paper Type] to 
the type of paper loaded in the printer.
Set this to [Plain Paper] for regular paper and labels, [Heavy Paper] for thick 
paper, and [Transparency] for transparencies.
NOTE
•If the paper curls...

Printing on Plain Paper, Heavy Paper, Label Paper, and Transparencies2-26
Loading and Delivering Paper
2
5Click [OK] to close the Properties dialog box.
6Click [OK] to start printing.
 

Printing on Index Card2-27
Loading and Delivering Paper
2
Printing on Index Card
This section describes how to print on index cards.
Loading Index Cards
You can only load index cards in the manual feed tray.
Loading Index Card into the Manual Feed Tray
Use the following procedure to load an index card into the manual feed tray.
Always load index cards lengthways into the manual feed tray.
IMPORTANT
•You can only load a single sheet of index card in the manual feed tray.
•You cannot print from the manual...

Printing on Index Card2-28
Loading and Delivering Paper
2
2Gently load the index card with the printing side facing up 
until it touches the back of the tray.
Make sure that the index card passes beneath the paper limit guides.
CAUTION
When loading index card, take care not to cut your hands with the edges of 
the paper.
IMPORTANT
•If the index card is warped, make sure you fix the warp before loading the card.
•Load the index card so that it is straight.
•If the rear edge of the index card is not...

Printing on Index Card2-29
Loading and Delivering Paper
2
NOTE
To print on index card with a logo already printed on it, load the index card so that 
the printed side is facing up and the top of the index card is at the far end.
3Slide the paper guides to fit both sides of the index card.
ABC
ABC
 

Printing on Index Card2-30
Loading and Delivering Paper
2
IMPORTANT
•If you run out of index card and then refill the paper tray, the Paper Indicator will 
flash. Press the   (Paper Key) to resume printing.
•Always make sure the paper guides match the width of the index card. If the paper 
guides are too loose or too tight, the index card will not feed properly and this will 
cause paper jams.
Selecting Printer Driver Settings and Printing
This section describes how to set the printer driver settings....

Printing on Index Card2-31
Loading and Delivering Paper
2
2Display the [Page Setup] sheet, then set the [Page Size] 
setting to the size of the document that you created in the 
application.
NOTE
When you set the page size to [Index Card], the following message is displayed 
and the paper type is automatically changed.