Canon Lbp 3000 User Guide

 
viii 
Displays Used in This Manual 
Displays used in this manual may differ from those on your computer depending on 
the system environment.
The buttons which you should press are marked with a   as shown below.
When multiple buttons can be pressed on the screen shot of computer operation 
screen, all buttons are marked. Select the button which suits your needs. 
Abbreviations Used in This Manual 
In this manual, product names and model names are abbreviated as follows: 
Microsoft 
®  
Windows 
®  
95...

ix
Legal Notices
Model Name
The following names may be provided for the safety regulations in each sales 
region of this Laser Beam Printer.
110 - 127 V model: L11121A
220 - 240 V model: L11121E
FCC (Federal Communications Commission)
Laser Beam Printer, Model L11121A
■110 -127 V model
This device complies with part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received,...

x
Do not make any changes or modifications to the equipment unless otherwise specified in 
the manual. If such changes or modifications should be made, you could be required to 
stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
EMC Directive (220 - 240 V model)
This equipment has been tested in a typical system to comply with the technical 
requirements of EMC Directive.
•Use of shielded cable is necessary to comply with the technical...

xi
This printer has been classified under IEC60825-1:1993, EN60825-1:1994 and 
conforms to the following classes:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A RAYONNEMENT LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LASER DE CLASE 1
APARELHO A LASER DE CLASSE 1
(220 - 240 V model only)
CAUTION
Performance of procedures other than those specified in this manual may result 
in hazardous radiation exposure.
International Energy Star-Program
As an ENERGY STAR Partner, Canon Inc. has determined...

xii
WEEE Directive
Trademarks
Canon, the Canon Logo, and LBP are trademarks of Canon Inc.
Adobe
® Acrobat is a trademark of Adobe Systems Incorporated.
Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and 
other countries.
Windows Server and Windows Vista are trademarks of Microsoft Corporation.
Other product and company names herein may be the trademarks of their 
respective owners.
Copyright
Copyright 2005 by Canon Inc. All rights reserved.
No part of this publication may be...

xiii
Disclaimers
The information in this manual is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS 
MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, 
INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO 
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR 
PURPOSE OF USE OR AGAINST INFRINGEMENT OF ANY PATENT. CANON 
INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR 
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES...

xiv
  Important Safety Instructions
Before using this product, make sure you read this section (Important Safety 
Instructions) thoroughly, and that you use the product correctly. The purpose of the 
warnings and cautions contained in this section is to prevent injuries to the user and 
other people, and to prevent damage to property. Make sure you adhere to these 
warnings and cautions. Do not perform any actions that are not explicitly written in 
this manual.
Installation
WARNING
•Do not install the...

xv
CAUTION
•Do not install the printer on an unsteady platform, an uneven surface, or any other 
unstable location, or any location subject to vibrations. If the printer falls down or the 
platform tips over, someone may be injured.
•Do not install this printer in a location where a wall or other object will block the 
ventilation slots in the printer. Do not install the printer on a bed, sofa, thick carpet, 
etc. If the ventilations slots are blocked, the internal printer components will 
overheat, and...

xvi
•Do not use any electrical cables other than the supplied cord. Doing so may cause 
fire or electrical shock.
•In principle, you should not connect the printer using an extension cord or connect 
too many appliances to a single power outlet. However, if there is no choice but to 
use an extension cord or connect multiple appliances to a single power outlet, it is 
the responsibility of the user to take care of the following cautions. If these points are 
not followed correctly, a fire or electrical...

xvii
•When you are moving the printer, always turn the printer and computer off, unplug 
the power plug, and remove the interface cable. If you move the printer without 
unplugging the cables, the electrical cord and interface cable may be damaged, 
causing a fire or electrical shock.
•Do not drop paper clips, staples, or any other metallic objects into the printer. Do not 
spill water, liquids, or flammable substances (alcohol, benzene, thinners, etc.) onto 
the printer. If any of these items come into...