Canon Laser Shot Lbp5970 User Guide

50
Step8
Installation Space
The dimensions of each part, foot positions, and the space required for using 
the printer with the paper feeders installed are indicated in the following 
figures:
Moving the Printer
When installing the paper feeder in the printer after installing the printer, 
move the printer to an appropriate location temporarily using the following 
procedure.
W ARNING
Be sure to turn the printer and computer OFF, unplug the power plug, 
and then disconnect all the interface cables from...

51
Step8
3Pull out the paper cassette.
Pull the paper cassette out until it stops a.
After lifting the paper cassette up a little 
b, pull it out while supporting it with the 
other hand in the figure c.
IMPORTANT
The paper cassette cannot be pulled out horizontally. If you try to pull it out 
f orcefully, this may result in damage to the paper cassette.
4Move the printer unit from the installation site.
Carry the printer with 4 or more people by holding the lift handles on the lower 
portion of the...

52
Step8
•Be sure not to hold the printer by the paper cassette, output area, or 
any portions other than the lift handles. If you do so, you may drop 
the printer, resulting in personal injury.
IMPORTANT
Make sure that the front cover and multi-purpose tray are closed before 
carrying the printer.
Installing the Paper Feeders
The paper feeders are to be installed at the bottom of the printer unit.
CAUTION
•Put the printer or paper feeders down slowly and carefully. Be careful 
not to hurt your hands....

53
Step8
1Remove the tape that secures the paper cassette and 
cassette protective cover.
2Remove the packing materials shown in the figure in order 
of  a and  b. IMPORTANT
Dispose of the packing materials according to local regulations.
3Pull out the paper cassette.
Pull the paper cassette out until it stops a.
After lifting the front of the paper cassette up a little 
b, pull it out while supporting 
the cassette with your left hand until the handle (A) on the right sid\
e of the paper 
cassette...

54
Step8 While holding the paper cassette with both hands, pull it out completely\
 
d as 
shown in the figure.
IMPORTANT
•Because the paper cassette is heavy, hold it with your both hands 
securely.
•Place the removed paper cassette on an even and stable surface.
•The paper cassette cannot be pulled out horizontally. If you try to pull it out 
f orcefully, this may result in damage to the paper cassette.
4Remove the packing material attached with tape.
5Remove the tape and packing material attached to...

55
Step8
•Do not touch the feed roller (A) in the paper cassette. This may result in 
misfeeds.
•Dispose of the packing materials according to local regulations.
6Remove the cassette protective cover of the paper feeder.
While pressing the levers of the cassette protective cover, remove the cassette 
protective cover as shown in the figure.
7Place the paper feeder at the installation site.
When carrying the paper feeder, hold the lift handles on both sides with both 
hands as shown in the figure.
CAUTION...

56
Step8
IMPORTANT
•Do not touch the connector (A) or feed rollers (B) in the paper feeder. This 
may result in damage to the printer or misfeeds.
•Do not install the paper feeder on a platform that may warp from the 
weight of the printer and optional accessories, or where the printer is liable 
to sink (such as a carpet or mat).
•Secure sufficient space around the paper feeder so that you can install the 
printer and connect cords such as the power cord and interface cables.
8When installing a paper...

57
Step8
10Gently set down the printer unit while matching the 
positioning pins (A) on the paper feeder.
11Fix the printer unit and paper feeder with the two metal 
fittings and two screws.
Hook the holes (A) of the metal fittings onto the hooks (B) on the\
 printer a, and 
then secure them with the screws b. Hook the tabs (A) of the metal fittings in the holes (B) on the pr\
inter 
c, and then 
secure them with the screws d.
(A)(A)
(A)
a
b
(A)
a
b
(B)
c
d
(A)
(B)
c
d
(A)
(B)
- Left side
- Right side
 

58
Step8
12Attach the cassette protective cover.
While pressing the levers of the cassette protective cover, insert the projections 
into the slot on the rear side of the paper feeder.
IMPORTANT
Do not put your hand or any object on the cassette protective cover, nor 
press it forcefully. This may result in damage to the cassette protective 
cover.
13Set the paper cassette in the printer unit and paper feeder.
14Connect the interface cables except for the USB cable, and 
connect the power cord.
15Plug...

59
Step8
1Turn the printer and computer OFF  a, remove the USB 
cable  b, and then disconnect the power plug from the AC 
power outlet  c.
2Remove all the interface cables and the power cord from 
the printer.
If there is not sufficient space to install the RAM/ROM module, move the printer to 
a place where you can work easier.
3Remove the rear cover.
Slide the opening (A) on the rear cover a little in the direction of the arrow a. Open the rear cover a little 
b, then remove the rear cover in the...