Canon Laser Shot Lbp5970 User Guide

 
10 
•
 
The fixing unit and its surroundings inside the printer are hot during 
use. When removing jammed paper or when inspecting the inside of 
the printer, do not touch the fixing unit and its surroundings, as 
doing so may result in burns. 
•
 
When removing jammed paper or replacing a drum cartridge, toner 
cartridge, or waste toner container, take care not to allow the toner to 
come into contact with your hands or clothing, as this will dirty your 
hands or clothing. If they become dirty, wash...

 11 
Introducing Your Print System 
In addition to its standard features, listed in 
 
  
Users Guide, you can add 
the following options to expand your printing capabilities.CD-ROM
PAPER FEEDER PF-98B
For high volume printing 
of up to 550 sheets in a 
single paper size.
RAM DIMMs (memory)
For memory expansion. 
Available in 128 MB, 
256 MB, and 512 MB 
DIMMs. It is 
recommended that you 
should use Canon 
Expansion RAM ER-
128A, ER-256A, or ER-
512A as the expansion 
RAM. PS ROM A-98C
By installing PS...

 
12 
Step 1 
T aking the Printer Out of 
the Package and 
Installing the Printer 
Confirming the Contents of the Box 
Make sure that all the following items are contained in the package before 
installing the printer. If any item is missing or damaged, please contact your 
local authorized Canon dealer. 
IMPORTANT
 
The supplied CD-ROM does not include the printer driver for Macintosh. 
Download the printer driver for Macintosh that supports this printer from 
the Canon website. If you cannot find the...

13
Step1
1Carry the printer to the installation site.
Carry the printer with 4 or more people by holding the lift handles on the lower 
portion of the printer and lifting it up at the same time.
CAUTION
•The printer weight is approximately 48.5 kg without the toner 
cartridges and drum cartridges installed. The printer must be carried 
by  4 or more people, and care must be taken to avoid hurting your 
back or other portions of your body when carrying the printer.
•Be sure not to hold the printer by the...

14
Step1Removing the Packing Materials
This printer is provided with tape and packing materials to be protected from 
excessive vibrations and shocks during delivery. Remove the tape and packing 
materials after the printer is carried to the installation site.
IMPORTANT
•If there is any packing material remaining inside the printer, this may result 
in poor print quality or damage to the printer when operating the printer. Be 
sure to remove all the packing materials following the procedure.
•The removed...

15
Step1
2Open the front cover.
While pressing the lever on the right side of the front cover, open the front cover 
toward you.
IMPORTANT
Before opening the front cover, make sure that the multi-purpose tray and 
the paper cassette of the printer are closed.
3Tilt the fixing unit toward you.
While pressing the green lock release buttons (A) on the left and right side of the 
fixing unit a, hold the tabs (B) and the fixing unit toward you b as shown in the 
figure.
IMPORTANT
Remove the string-attached metal...

16
Step1
4Pull out the string-attached metal bars of the fixing unit by 
the string.
5While holding the tabs (A), move the fixing unit back to its 
original position  a, and then press the tabs on the both 
sides as shown in the figure  b.
6Close the front cover.
While supporting the front cover a, push and close the front cover with both 
hands as shown in the figure b.
CAUTION
Push the front portion of the front cover to close it as shown in the 
figure. If closing the front cover by the levers on the both...

17
Step1
7Pull out the paper cassette.
Pull the paper cassette out until it stops a.
After lifting the paper cassette up a little 
b, pull it out while supporting it with the 
other hand c as shown in the figure.
IMPORTANT
The paper cassette cannot be pulled out horizontally. If you try to pull it out 
f orcefully, this may result in damage to the paper cassette.
8Remove the tape shown in the figure.
9Remove the packing material inside the paper cassette.
IMPORTANT
•A packing material is attached to the...

18
Step1
•Do not touch the black rubber pad (A) in the paper cassette. This may 
result in misfeeds.
10Set the paper cassette in the printer.
While holding the paper cassette with both hands, insert it until it stops a as 
shown in the figure. After lifting the front of the paper cassette up a little 
b, push the paper cassette 
into the printer firmly until the front side of the paper cassette is flush with the front 
surface of the printer 
c.
(A)
a
b
c
 

19
Step2
Connecting the Power 
Cord
IMPORTANT
•One AC power outlet should be used exclusively for the printer.
•Do not plug the power plug into the auxiliary outlet on a computer.
•Do not connect this printer to an uninterruptible power source. This may 
cause printer malfunction or breakdown at the occurrence of a power 
failure.
1Make sure that the power switch of the printer is OFF.
The printer is OFF when   of the power switch is pressed.
2Plug the supplied power cord into the power socket.
3Plug the...