Canon Laser Shot Lbp5970 User Guide
Have a look at the manual Canon Laser Shot Lbp5970 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
10 • The fixing unit and its surroundings inside the printer are hot during use. When removing jammed paper or when inspecting the inside of the printer, do not touch the fixing unit and its surroundings, as doing so may result in burns. • When removing jammed paper or replacing a drum cartridge, toner cartridge, or waste toner container, take care not to allow the toner to come into contact with your hands or clothing, as this will dirty your hands or clothing. If they become dirty, wash them immediately with cold water. Washing with warm water will set the toner and make it impossible to remove the toner stains. • When removing paper jammed inside the printer, remove the jammed paper gently to prevent the toner on the paper from scattering and g etting into your eyes or mouth. If the toner gets into your eyes or mouth, wash them immediately with cold water and immediately consult a physician. • When loading paper or removing jammed paper, take care not to cut y our hands with the edges of the paper. • When removing a used toner cartridge from the toner cartridge slot, remove the cartridge carefully to prevent the toner from scattering and getting into your eyes or mouth. If the toner gets into your eyes or mouth, wash them immediately with cold water and immediately consult a physician. Consumables W ARNING • Do not throw a used toner cartridge into open flames, as this may cause toner remaining inside the cartridge to ignite and result in burns or a fire. • Do not store a toner cartridge or copy paper in places exposed to open flames, as this may cause the toner or paper to ignite and result in burns or a fire. • Place the toner cartridge or drum cartridge into a plastic bag to prevent its toner from scattering, and then dispose of the toner cartridge or drum cartridge according to local regulations. CAUTION • K eep toner cartridges and other consumables out of the reach of small children. If these items are ingested, consult a physician immediately. • Do not attempt to disassemble the toner cartridge, drum cartridge, or waste toner container. The toner may scatter and get into your eyes or mouth. If the toner gets into your eyes or mouth, wash them immediately with cold water and immediately consult a physician. • If toner leaks from the toner cartridge, drum cartridge, or waste toner container, be careful not to inhale the toner or allow it to come into contact with your skin directly. If the toner comes into contact with y our skin, wash it out with soap. If you have an irritation on your skin, or if you inhaled the toner, immediately consult a physician. Others W ARNING The drum cartridge generates a low level magnetic field. If you use a cardiac pacemaker and feel abnormalities, please move away from the drum cartridge and consult your physician immediately.
11 Introducing Your Print System In addition to its standard features, listed in Users Guide, you can add the following options to expand your printing capabilities.CD-ROM PAPER FEEDER PF-98B For high volume printing of up to 550 sheets in a single paper size. RAM DIMMs (memory) For memory expansion. Available in 128 MB, 256 MB, and 512 MB DIMMs. It is recommended that you should use Canon Expansion RAM ER- 128A, ER-256A, or ER- 512A as the expansion RAM. PS ROM A-98C By installing PS ROM, PostScript 3 Emulation which makes it possible to print with PostScript is available. Also, by installing a hard disk and expansion RAM module (256 MB or more), you can print PDF files using the direct print function. Hard Disk Kit HD-98B Installing Hard Disk Kit HD-98B allows you to save received print jobs and to use various printing functions such as the secured print function. PS/Barcode ROM A-98B By installing PS/Barcode ROM, the bar code fonts are also available as well as the functions of PS ROM.
12 Step 1 T aking the Printer Out of the Package and Installing the Printer Confirming the Contents of the Box Make sure that all the following items are contained in the package before installing the printer. If any item is missing or damaged, please contact your local authorized Canon dealer. IMPORTANT The supplied CD-ROM does not include the printer driver for Macintosh. Download the printer driver for Macintosh that supports this printer from the Canon website. If you cannot find the printer driver for Macintosh that supports this printer on the Canon website, contact your local authorized Canon dealer. NOTE • This printer does not come with a USB cable. Have an appropriate one av ailable for the computer you are using. Use a USB cable with the f ollowing symbol. • The panel sheet on which the names of the indicators or keys on the control panel are indicated is supplied with the printer depending on the country or region. Attach the panel sheet to the control panel as needed. • Canon Font Manager is included in the [Canonfm] folder on the User Manual CD-ROM. • 127 PS fonts for Macintosh are included in the User Manual CD-ROM. Carrying the Printer to the Installation Site After securing an installation site, take the printer out of the package and carry it to the installation site. IMPORTANT • Install the printer on a platform such as a desk that can easily support the w eight of the printer. •Do not install the printer on a platform that may warp from the weight of the printer and optional accessories, or where the printer is liable to sink (such as a carpet or mat). •When installing the optional paper feeder, install it at the installation site before taking the printer out of the package. For details on installing the paper feeder, see Installing a Paper Feeder, on p. 49. Step1 Getting Started Guide (This Manual) Toner cartridge X 4Drum cartridge X 4Paper size labels Paper size indicator Printer The following parts are already installed. •Paper cassette • Fixing unit • Waste toner container User Manual CD-ROM • Manuals - Users Guide - Remote UI Guide - Network Guide • Canon Font Manager (Windows only) • PS Fonts (Macintosh only) User Software CD-ROM • Printer Driver Power cord (The form of the supplied power cord may differ from the one in the above illustration.) Panel sheet (Only for certain countries or regions) Ferrite core A3A3 A4 A4EXEC LGL A5 B4 B5LT R11x 17
13 Step1 1Carry the printer to the installation site. Carry the printer with 4 or more people by holding the lift handles on the lower portion of the printer and lifting it up at the same time. CAUTION •The printer weight is approximately 48.5 kg without the toner cartridges and drum cartridges installed. The printer must be carried by 4 or more people, and care must be taken to avoid hurting your back or other portions of your body when carrying the printer. •Be sure not to hold the printer by the paper cassette, output area, or any portions other than the lift handles. If you do so, you may drop the printer, resulting in personal injury. IMPORTANT •When taking out the printer, secure sufficient space around the printer and take it out with four or more people. •Carry the printer with the tape that secures the paper cassette or front cover etc. attached. 2Put the printer down carefully at the installation site. CAUTION •Put the printer down slowly and carefully. Be careful not to hurt your hands. •The weight of the printers is as follows. Be sure to install the printer on a sturdy platform that can easily support the weight of the printer and optional accessories. Do not install the printer in unstable locations, such as unsteady platforms or inclined floors, in locations subject to excessive vibrations, or on the upper row of a computer rack, as this may cause the printer to fall or tip over, resulting in personal injury. IMPORTANT Secure sufficient space around the printer at the installation site so that y ou can install the optional accessories and connect cables. DefaultWith the toner cartridges and drum cartridges installedWith the optional paper feeders (3 units) installed Approx. 48.5 kg Approx. 57.4 kg Approx. 90.4 kg
14 Step1Removing the Packing Materials This printer is provided with tape and packing materials to be protected from excessive vibrations and shocks during delivery. Remove the tape and packing materials after the printer is carried to the installation site. IMPORTANT •If there is any packing material remaining inside the printer, this may result in poor print quality or damage to the printer when operating the printer. Be sure to remove all the packing materials following the procedure. •The removed packing materials are required when transporting the printer f or relocation or maintenance. Keep them where they will not get lost. NOTE The packing materials may be changed in form or position to be placed, or may be added or removed without notice. 1Remove the tape attached to the printer. You will remove the tape (A) later. IMPORTANT Dispose of the packing materials according to local regulations. NOTE Remove the tape that secures the rear cover while supporting the rear cover by hand as shown in the figure. (A)
15 Step1 2Open the front cover. While pressing the lever on the right side of the front cover, open the front cover toward you. IMPORTANT Before opening the front cover, make sure that the multi-purpose tray and the paper cassette of the printer are closed. 3Tilt the fixing unit toward you. While pressing the green lock release buttons (A) on the left and right side of the fixing unit a, hold the tabs (B) and the fixing unit toward you b as shown in the figure. IMPORTANT Remove the string-attached metal bars of the fixing unit using the following procedure. Do not remove the string-attached metal bars when the fixing unit is not tilted toward you. (A) aa (B) b
16 Step1 4Pull out the string-attached metal bars of the fixing unit by the string. 5While holding the tabs (A), move the fixing unit back to its original position a, and then press the tabs on the both sides as shown in the figure b. 6Close the front cover. While supporting the front cover a, push and close the front cover with both hands as shown in the figure b. CAUTION Push the front portion of the front cover to close it as shown in the figure. If closing the front cover by the levers on the both sides, you may catch your fingers, resulting in personal injury. bb (A) a b a
17 Step1 7Pull out the paper cassette. Pull the paper cassette out until it stops a. After lifting the paper cassette up a little b, pull it out while supporting it with the other hand c as shown in the figure. IMPORTANT The paper cassette cannot be pulled out horizontally. If you try to pull it out f orcefully, this may result in damage to the paper cassette. 8Remove the tape shown in the figure. 9Remove the packing material inside the paper cassette. IMPORTANT •A packing material is attached to the paper cassette. Be sure to pull out the paper cassette and remove the packing material. a b c
18 Step1 •Do not touch the black rubber pad (A) in the paper cassette. This may result in misfeeds. 10Set the paper cassette in the printer. While holding the paper cassette with both hands, insert it until it stops a as shown in the figure. After lifting the front of the paper cassette up a little b, push the paper cassette into the printer firmly until the front side of the paper cassette is flush with the front surface of the printer c. (A) a b c
19 Step2 Connecting the Power Cord IMPORTANT •One AC power outlet should be used exclusively for the printer. •Do not plug the power plug into the auxiliary outlet on a computer. •Do not connect this printer to an uninterruptible power source. This may cause printer malfunction or breakdown at the occurrence of a power failure. 1Make sure that the power switch of the printer is OFF. The printer is OFF when of the power switch is pressed. 2Plug the supplied power cord into the power socket. 3Plug the power plug into the AC power outlet. Put the power cord through the concavity as shown in (A). NOTE The form of the supplied power cord may differ from the one in the above illustration. Step2 (A)