Canon Laser Shot Lbp5970 User Guide

40
Step6
1Make sure that the printer and computer are OFF.
2Connect the B-type (square) end of the USB cable to the 
USB connector on the rear side of the printer.
3Connect the A-type (flat) end of the USB cable to the USB 
port on the computer.
NOTE
If you are not sure about the USB cable that is supported by the computer 
you are using, contact the store where you purchased the computer.
IMPORTANT
The supplied CD-ROM does not include the printer driver for Macintosh. 
Download the printer driver for...

41
Step7
Turning the Printer ON 
and Checking the 
Printer Operation
This section describes the procedures for turning the printer ON and 
checking the printer operation.
T urning the Printer ON
IMPORTANT
•Do not turn the printer ON immediately after turning it OFF. If you want to 
turn the printer ON again after turning it OFF, wait at least 10 seconds after 
turning the printer OFF before turning it ON again.
•If the printer does not operate properly or an error message appears, see 
When the Printer...

42
Step7
Checking the Operations with 
Configuration Page Print
Before using the printer for the first time, be sure to perform Configuration Page 
Print to check the operations using the following procedure. Configuration Page 
Print prints printer information such as a list of the menu settings and the 
number of the total print pages.
NOTE
•Configuration Page Print is designed to be printed on A4 size paper. 
Although Configuration Page Print can be printed on another size of paper, 
it will be printed with...

43
Step7
When the Printer Does Not Operate 
Properly
If the printer does not operate even after turning it ON or print Configuration 
Page Print properly, the following causes are conceivable.
Changing the Language Used in the 
Display
The default value of the language used in the display is [ENGLISH].
You can change the display language to [FRENCH], [GERMAN], [ITALIAN], or 
[SPANISH] using the following procedure.
SymptomCauseRemedy
The printer cannot be 
turned ON. The power plug is 
unplugged from the...

44
Step7
1Press [Settings].
2Select CONTROL MENU using [ ] and [ ], then 
press [OK].
3Select PANEL LANGUAGE using [ ] and [ ], 
then press [OK].
4Select the display language using [ ] and [ ], 
then press [OK].
The display language is changed.
Turning the Printer OFF
Tu rn the printer OFF using the following procedure. The procedure for turning 
the printer OFF is different between when a hard disk is used and when it is not 
used.
IMPORTANT
•When using the hard disk, be sure to turn the printer OFF as...

45
Step7
1Make sure that the Job indicator is off.
2Press   of the power switch on the printer.
When Using a Hard Disk (Only When a Hard Disk Is  
Installed)
When using the optional hard disk, turn the printer OFF using the following 
procedure.
IMPORTANT
•If you perform a shutdown when any job of which you stopped the 
operation or of secured print in the hard disk, the message  is displayed. If you perform a shutdown, all the jobs are deleted. 
However, the jobs stored in the boxes are saved in the...

46
Step7
4When the message  appears, press 
  of the power switch on the printer.
 

47
Step8
Installing the Optional 
Accessories
Optional Accessories
The following optional accessories are available in order to make full use of the 
printer functions. Purchase them to fulfill your needs. For the optional 
accessories, contact your local authorized Canon dealer.
Paper Feeder
In addition to the supplied multi-purpose tray and paper cassette, up to five 
paper sources can be used by installing the optional paper feeder.
The paper feeder can be loaded with up to approximately 550 sheets of...

48
Step8
NOTE
Be sure to use a 3.3V DDRAM DIMM compatible with this printer as the 
expansion RAM module. It is recommended that you should use Canon 
Expansion RAM ER-128A, ER-256A, or ER-512A as the expansion RAM.
PS ROM
By installing PS ROM, PostScript 3 Emulation which makes it possible to 
print with PostScript is available.
Also, by installing a hard disk and expansion RAM module (256 MB or more), 
y ou can print PDF files using the direct print function.
IMPORTANT
Be sure to use PS ROM A-98C...

49
Step8
Installing a Paper Feeder
The paper feeder is to be installed at the bottom of the printer unit.
Make sure that all the following items are contained in the package before 
installing the paper feeder. If any item is missing or damaged, please contact 
your local authorized Canon dealer.
W ARNING
Be sure to turn the printer OFF, unplug the power plug, and then 
disconnect all the interface cables and power cord from the printer 
before installing the paper feeder. Otherwise, the power cord or...