Canon Ir3100c User Guide

xxi
Using The CD-ROM Menu
This section describes how to use the CD-ROM Menu. When you in sert the User Manual CD-ROM 
provided into the CD-ROM drive, the Language Sele ction screen is displayed. Clicking a language 
on this screen displays the following menu. (The sample screenshot shown here is for Windows 
users.)
NOTE
For Macintosh users, double-click the [START] icon to start the CD-ROM Menu. The Language Selection 
screen is displayed. 
a BROWSE MANUAL
You can read any of the listed guides by...

xxii
Periodic Inspection of the Breaker
This machine has a breaker that detects excess current  or leakage current. Be sure to test the breaker 
once or twice a month us ing the following procedure.
IMPORTANT
•Make sure that the main power is turned ON, and the machine is neither printing nor scanning before inspecting 
the breaker.
•If a malfunction occurs after an inspection, contact your local authorized Canon dealer.
•Before the main power is turned OFF, make sure that you wait for at least 30...

xxiii
4Move the breaker lever to ON ("I" side).
IMPORTANT
If the breaker stops between ON and OFF, move the breaker 
lever to OFF, then back to ON.
5Press the main power switch to ON ("I" side).
6Fill in the check sheet, located on page 4-6, to document your periodic 
inspections of the breaker.
4
ONI side)
( (OFF side)
ONI
 side)
((OFF side)
ONI  side)(
(OFF side)5
 

xxiv
 

CHAPTER
1-1
1
Before You Start Using This 
Machine
This chapter describes what you should know before using this machine, such as parts and their functions, and how to turn ON the main power.
Installation Location and Handling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . 1-2
Installation Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . 1-2
Handling Precautions . . . . ....

Installation Location and Handling1-2
Before You Start Using This Machine
1
Installation Location and Handling
This section describes precautions for installation location and handling. We recommend that you read 
this section prior to using this machine.
 
Installation Precautions
Avoid Installing the Machine in the Following Locations
■ Avoid locations subject to  extremes of temperature 
and humidity, whether low or high.
For example, avoid installing the machine near water faucets, 
hot water...

Installation Location and Handling1-3
Before You Start Using This Machine
1
■Avoid locations where a  considerable amount of dust accumulates.
■ Avoid locations where ammonia gas is emitted.
■ Avoid locations near volatile  or flammable materials, such  as alcohol or paint thinner.
■ Avoid locations that are  subject to vibration. 
For example, avoid installing the machine on unstable floors or 
stands.
■Avoid exposing the machin e to rapid changes in 
temperature.
If the room in which the machine is...

Installation Location and Handling1-4
Before You Start Using This Machine
1
■Avoid installing the machine ne ar televisions, radios, or similar electronic equipment.The machine might interfere with sound and picture signal reception. Insert the power plug into a dedicated 
power outlet, and maintain as much space as possible between the machine and other electronic equipment.
■Do not remove the machine's leveling feet.Do not remove the machines leveling feet after the machine has been installed. If...

Installation Location and Handling1-5
Before You Start Using This Machine
1
Provide Adequate Installation Space
■Provide enough space on each side of the machine for unrestricted operation.
Moving the Machine
■If you intend to move the ma chine, contact your local 
authorized Canon dealer beforehand.
No optional equipment is attached.
1,035 mm
1,238 mm
100 mm or more
The optional Feeder (DADF-L1), Finisher-P1, 
and Paper Deck-Q1 are attached. The optional Feeder(DADF-L1),Saddle 
Finisher-Q2, Puncher...

Installation Location and Handling1-6
Before You Start Using This Machine
1
 
Handling Precautions
■Do not attempt to dis assemble or modify the 
machine.
■ Some parts inside the machine are subjec t to high-voltages and temperatures. Take 
adequate precautions when in specting the inside of the machine. Do not carry out any 
inspections not descri bed in this manual.
■ Be careful not to spill liquid or drop any foreign 
objects, such as paper clip s or staples inside the 
machine. If a foreign object...