Canon Ir Advance C5035 User Guide

							1
Basic Copy Settings2-49
2
Making Copies in the Voice Navigation Mode
3Press   (Back) or   (Next) to 
move the focus over the desired 
original type  press   (Select).
4Press  (Con firm).
The display returns to the Regular Copy 
Basic Features screen.
5Press  (Start).
Copying starts.
NOTE
To cancel all settings and return the 
machine to the Standard mode, press   (Reset).
 
						

							Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-50
Changing Color Modes
If the model of the machine you are using can 
make color copies, you can also select the 
color mode.
You can select the following  five types of color 
mode.
NOTE
The default setting is Auto(Color/Black).
 Auto (Color/Black)
If the Auto(Color/Black) mode is selected, 
the machine automatically recognizes 
whether the original is in color or 
black-and-white. Color originals are copied 
in the Full Color mode, while 
black-and-white originals are copied in the 
Black mode.
 
						

							1
Basic Copy Settings2-51
2
Making Copies in the Voice Navigation Mode
IMPORTANT
When the Auto(Color/Black) mode is set 
and your originals contain color sections, 
the machine copies them in the Full Color 
mode. However, the machine may copy 
color originals in the Black mode under the 
following conditions. To avoid this, set the 
color mode to Full Color.
- If the originals contain few color sections
- If the color sections are located only on  the left side (within 3/8 (10 mm) from the 
left edge) or the right side (within 5/8 (17 
mm) from the right edge) of the originals 
when placing the originals in the feeder
- If the originals contain light color densities
- If the color sections of the originals are  close to black
 Full Color
The Full Color mode always copies in color 
regardless of whether the original is in color 
or black-and-white.
NOTE
If a black-and-white original is copied in the 
Full Color mode, it is counted as a color 
copy.
 
						

							Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-52 
Black
The Black mode always copies in 
black-and-white regardless of whether the 
original is in color or black-and-white.
 Single Color
The Single Color mode enables you to 
make one-color copies.
IMPORTANT
You can select Red, Green, Blue, Yellow, 
Magenta, or Cyan as the color.
NOTE
If a black-and-white document is copied in 
the Single Color mode, it is counted as a 
color copy.
Two Colors
The Two Colors mode enables you to make 
two-color prints, composed of a color you 
specify, and black.
IMPORTANT
You can select Red, Green, Blue, Yellow, 
Magenta, or Cyan as the color.
 
						

							1
Basic Copy Settings2-53
2
Making Copies in the Voice Navigation Mode
NOTE
If a black-and-white document is copied in 
the Two Colors mode, it is counted as a 
color copy.
1Place your originals.
NOTE
For instructions on placing originals, see 
Placing Originals, on p. 2-20.
2Press   (Back) or   (Next) to 
move the focus to [Select Color]   
press  (Select).
The voice guide announces that the 
Select Color screen is displayed.
 
						

							Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-54
3Press   (Back) or   (Next) to 
move the focus over the desired 
Color mode   press   (Select).
 If you selected [Auto(Color/Black)], 
[Full Color], or [Black]:
❑Press  (Con firm).
The display returns to the Regular 
Copy Basic Features screen.
 
						

							1
Basic Copy Settings2-55
2
Making Copies in the Voice Navigation Mode
If you selected [Single Color]:
❑ Move the focus over the desired 
color   press   (Select).
❑ Press  (Con firm).
The display returns to the Regular 
Copy Basic Features screen.
 
						

							Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-56 
If you selected [Two Colors]:
❑Move the focus over the desired 
color   press   (Select).
❑ Press  (Con firm).
The display returns to the Regular 
Copy Basic Features screen.
4Press  (Start).
Copying starts.
NOTE
To cancel all settings and return the 
machine to the Standard mode, press   (Reset).
 
						

							1
Basic Copy Settings2-57
2
Making Copies in the Voice Navigation Mode
Setting the Copy Ratio
You can set the machine to adjust the copy 
ratio automatically, or you can specify the 
copy ratio manually.
There are seven types of copy ratio settings, 
however, only the Preset Zoom, Zoom by 
Percentage and Auto Zoom modes can be 
set in the Voice Navigation mode.
NOTE
To set the copy ratio to 100%, select 
[Direct(100%)]/[1:1(100%)].
Preset Zoom
The machine offers you a variety of preset 
copy ratios to reduce or enlarge standard size 
originals to another standard paper size.
IMPORTANT
Place the originals horizontally in the 
following cases:
- If you are enlarging LTR/A4 originals to  11 x 17/A3 or B4
- If you are enlarging STMT originals to  11 x 17 (when the original is placed on 
the platen glass)
- If you are enlarging B5 originals to B4
 
						

							Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-58
- If you are enlarging A5 originals to A3
- If you are reducing 11 x 17/A3 or B4 
originals to LTR/A4 or B5 with Auto 
Orientation in Copy Settings (from the 
Settings/Registration screen) set to Off, 
load LTRR/A4R or B5R paper in Paper 
Drawer or the multi purpose tray.
 Reduction
The available preset copy ratios for 
reducing originals are:
•LGL   LTR (78%)
• 11 x 17   LGL or 11 x 15   LTR (73%)
• 11 x 17   LTR (64%)
• 11 x 17   STMT (50%)
• A3   B4, A4   B5 (86%)
• B4   A4, B5   A5 (81%)
• A3   A4, B4   B5 (70%)
• A3   B5 (61%)
• A3   A5 (50%)
• Minimum (25%)