Canon Ir Advance C5030i User Guide
Have a look at the manual Canon Ir Advance C5030i User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1 Placing Originals2-29 2 Making Copies in the Voice Navigation Mode •If the size of the original is not detected, press (Start) follow the instructions on the screen to specify the original size. You can also manually select the paper size. •For more information, see Paper Selection, on p. 2-37.
Making Copies in the Voice Navigation Mode 1 2 Placing Originals 2-30 Feeder You should use the feeder when you want to copy several originals at the same time. Place your originals into the feeder, and then press (Start). The machine automatically feeds the originals to the platen glass and scans them. 2-sided originals can also be automatically turned over and scanned as 2 or 1-sided documents. You can place the following originals into the feeders original supply tray: • Weight: - One-sided scanning: 11 to 32 lb bond (42 to 128 g/m 2) - Two-sided scanning: 13 to 32 lb bond (50 to 128 g/m 2) • Size: - 11 x 17, LGL, LTR, LTRR, STMT, or STMTR/A3, B4, A4, A4R, B5, B5R, A5, A5R, or B6R • Tray Capacity: - 150 sheets of paper (20 lb bond (80g/m 2))
1 Placing Originals2-31 2 Making Copies in the Voice Navigation Mode These specifications may vary, depending on the machine you are using. For exact speci fications, please see the instruction manuals that came with your machine. IMPORTANT •Thin originals may become creased, if used in a high temperature or high humidity environment. •Do not place the following types of originals into the feeder: - Originals with tears or large binding holes - Severely curled originals or originals with sharp folds - Clipped or stapled originals - Carbon backed paper or other originals which may not feed smoothly - Transparencies and other highly transparent originals •If the same original is fed through the feeder repeatedly, the original may fold or become creased, and make feeding impossible. Limit repeated feeding to a maximum of 30 times (this number varies, depending on the type and quality of the original).
Making Copies in the Voice Navigation Mode 1 2 Placing Originals 2-32 • If the feeder rollers are dir ty from scanning originals written in pencil, perform the feeder cleaning procedure. (See the instruction manuals that came with your machine.) The feeder cleaning procedure is not supported by the Voice Navigation mode. Please seek assistance if it becomes necessary to perform this procedure. •Always smooth out any folds in your originals before placing them into the feeder. 1Adjust the slide guides to fit the size of your originals.
1 Placing Originals2-33 2 Making Copies in the Voice Navigation Mode 2Neatly place your originals with the side to be copied face up into the original supply tray. Place your originals as far into the feeder as they will go, until the Original Set indicator is lit. If any dirt on the original scanning area is detected when the originals are placed in the feeder, the following screen appears. Even though streaks may appear on the copies, you can continue to scan your documents by pressing (Select). Original Set Indicator
Making Copies in the Voice Navigation Mode 1 2 Placing Originals 2-34 It is recommended, however, that you open the feeder, clean the scanning area (thin glass strip on the platen glass’ left side with a slightly dampened, well wrung-out cloth), and then close the feeder. The following screen depicting how to clean the thin glass strip will not appear once the scanning area is clean. For instructions on cleaning the original scanning area, see the instruction manuals that came with your machine.
1 Placing Originals2-35 2 Making Copies in the Voice Navigation Mode This procedure must be performed manually, and therefore, there are no voice navigation instructions. Please seek assistance if you must perform this procedure. IMPORTANT •Do not add or remove originals while they are being scanned. •When scanning is complete, remove the originals from the original output area to avoid paper jams. Original Output Area
Making Copies in the Voice Navigation Mode 1 2 Placing Originals 2-36 NOTE •The scanned originals are output to the original output area in the order that they are fed into the feeder. •When you are enlarging an LTR or STMT/A4 or B5 original onto 11 x 17 or LGL/A3 or B4 paper, place the original horizontally. •You can place different size originals together into the feeder if you set the Different Size Originals mode. (See the instruction manuals that came with your machine.) The Different Size Originals mode is not suppor ted by the Voice Navigation mode. Please seek assistance if you need to use this mode.
2 Making Copies in the Voice Navigation Mode Basic Copy Settings2-37 Basic Copy Settings This section explains the procedure for specifying basic copy settings, such as selecting the paper size, and setting the Original Type, Select Color, Density, Copy Ratio, 2-Sided, and Finishing modes. Paper Selection You can manually specify a paper size or set the machine to automatically select a paper size for you. IMPORTANT You cannot specify the multi-purpose tray or select [Change MP Tray Paper] while in the Voice Navigation mode. NOTE The default setting is Auto.
Making Copies in the Voice Navigation Mode 1 2 Basic Copy Settings 2-38 1Place your originals. IMPORTANT Only the paper size and paper type can be selected from the Select Paper setting screen in the Voice Navigation mode. If you want to set a paper source to hold a speci fic paper size and type, you must change the paper loaded in the paper drawer and the size, and then set the type in [Paper Settings] in Settings/ Registration. For more information on changing the paper and paper type, see the instruction manuals that came with your machine.