Canon Ir Advance C5030i User Guide
Have a look at the manual Canon Ir Advance C5030i User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 116
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-64
5Press (Con firm) until you return
to the Copy Basic Features screen.
NOTE
If you enter a value outside the setting
range, you will hear a voice message
prompting you to enter an appropriate
value.
6Press (Start).
Copying starts.
NOTE
•To return the copy ratio to 100%, move
the focus to [Direct(100%)]/[1:1(100%)]
press (Select).
•To cancel all settings and return the
machine to the Standard mode, press (Reset).](http://img.usermanuals.tech/thumb/14/56506/w64_canon_ir_advance_c5030i-user-guide-115.png "Page 116
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-64
5Press (Con firm) until you return
to the Copy Basic Features screen.
NOTE
If you enter a value outside the setting
range, you will hear a voice message
prompting you to enter an appropriate
value.
6Press (Start).
Copying starts.
NOTE
•To return the copy ratio to 100%, move
the focus to [Direct(100%)]/[1:1(100%)]
press (Select).
•To cancel all settings and return the
machine to the Standard mode, press (Reset).")
![Page 118
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-66
1Place your originals.
NOTE
For instructions on placing originals, see
Placing Originals, on p. 2-20.
2Press (Back) or (Next) to
move the focus to [Copy Ratio]
press (Select).
If necessary, see the screen shot in step
2 of Preset Zoom, on p. 2-57.
The voice guide announces that the
Copy Ratio setting screen is displayed.
IMPORTANT
Make sure that you select a paper size
other than [Auto]. If you do not select a
paper...](http://img.usermanuals.tech/thumb/14/56506/w64_canon_ir_advance_c5030i-user-guide-117.png "Page 118
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-66
1Place your originals.
NOTE
For instructions on placing originals, see
Placing Originals, on p. 2-20.
2Press (Back) or (Next) to
move the focus to [Copy Ratio]
press (Select).
If necessary, see the screen shot in step
2 of Preset Zoom, on p. 2-57.
The voice guide announces that the
Copy Ratio setting screen is displayed.
IMPORTANT
Make sure that you select a paper size
other than [Auto]. If you do not select a
paper...")
![Page 119
1
Basic Copy Settings2-67
2
Making Copies in the Voice Navigation Mode
3Press (Back) or (Next) to
move the focus to [Auto] press
(Select).
4Press (Con firm).
The display returns to the Regular Copy
Basic Features screen.
5Press (Start).
Copying starts.](http://img.usermanuals.tech/thumb/14/56506/w64_canon_ir_advance_c5030i-user-guide-118.png "Page 119
1
Basic Copy Settings2-67
2
Making Copies in the Voice Navigation Mode
3Press (Back) or (Next) to
move the focus to [Auto] press
(Select).
4Press (Con firm).
The display returns to the Regular Copy
Basic Features screen.
5Press (Start).
Copying starts.")
![Page 120
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-68
NOTE
•If the original is placed on the platen
glass, the copy ratio automatically
appears when the feeder is closed,
provided that the original size can be
detected.
•If the original is placed in the feeder, the
copy ratio appears when (Start) is
pressed.
•To return the copy ratio to 100%, move
the focus to [Direct(100%)]/[1:1(100%)]
press (Select).
•To cancel all settings and return the
machine to the Standard mode,...](http://img.usermanuals.tech/thumb/14/56506/w64_canon_ir_advance_c5030i-user-guide-119.png "Page 120
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-68
NOTE
•If the original is placed on the platen
glass, the copy ratio automatically
appears when the feeder is closed,
provided that the original size can be
detected.
•If the original is placed in the feeder, the
copy ratio appears when (Start) is
pressed.
•To return the copy ratio to 100%, move
the focus to [Direct(100%)]/[1:1(100%)]
press (Select).
•To cancel all settings and return the
machine to the Standard mode,...")
![Page 121
1
Basic Copy Settings2-69
2
Making Copies in the Voice Navigation Mode
IMPORTANT
•The Finishing modes cannot be set if
Transparency, Tracing Paper, or Labels is
selected as the paper type.
•The Finishing mode cannot be used with
other copy modes, depending on the model
of the machine. When the focus moves
[Finishing], you hear a message cannot
select this with the current settings.
NOTE
•To use the Staple mode, an optional
fi nisher must be attached to the main unit.
•The Face Up/Face Down mode...](http://img.usermanuals.tech/thumb/14/56506/w64_canon_ir_advance_c5030i-user-guide-120.png "Page 121
1
Basic Copy Settings2-69
2
Making Copies in the Voice Navigation Mode
IMPORTANT
•The Finishing modes cannot be set if
Transparency, Tracing Paper, or Labels is
selected as the paper type.
•The Finishing mode cannot be used with
other copy modes, depending on the model
of the machine. When the focus moves
[Finishing], you hear a message cannot
select this with the current settings.
NOTE
•To use the Staple mode, an optional
fi nisher must be attached to the main unit.
•The Face Up/Face Down mode...")
![Page 122
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-70 •
[Face Up/Face Down] may not be available
depending on the model of the machine
you are using.
•If you set the Staple or Hole Punch mode,
the side of the paper which is printed on
will always be output face down.
•The multi-purpose tray is not supported by
the Voice Navigation mode.
•If the [Finishing] shor tcut key is not
displayed on the Copy Basic Features
screen, you cannot use the Finishing
mode. For information on how...](http://img.usermanuals.tech/thumb/14/56506/w64_canon_ir_advance_c5030i-user-guide-121.png "Page 122
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-70 •
[Face Up/Face Down] may not be available
depending on the model of the machine
you are using.
•If you set the Staple or Hole Punch mode,
the side of the paper which is printed on
will always be output face down.
•The multi-purpose tray is not supported by
the Voice Navigation mode.
•If the [Finishing] shor tcut key is not
displayed on the Copy Basic Features
screen, you cannot use the Finishing
mode. For information on how...")
![Page 123
1
Basic Copy Settings2-71
2
Making Copies in the Voice Navigation Mode
2Press (Back) or (Next) to
move the focus to [Finishing] press
(Select).
The voice guide announces that the
Finishing screen is displayed.](http://img.usermanuals.tech/thumb/14/56506/w64_canon_ir_advance_c5030i-user-guide-122.png "Page 123
1
Basic Copy Settings2-71
2
Making Copies in the Voice Navigation Mode
2Press (Back) or (Next) to
move the focus to [Finishing] press
(Select).
The voice guide announces that the
Finishing screen is displayed.")
![Page 124
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-72
3Press (Back) or (Next) to
move the focus to [Collate (Page
order)] press (Select).
[Hole Punch] appears only if the
optional puncher unit is attached to an
optional finisher or booklet finisher.
[Saddle Fold] appears only if the
optional booklet finisher is attached.
[Fold] appears only if the optional paper
folding unit is attached.
[Offset] appears only if an optional
finisher is attached.
[Rotate 90 Degrees] appears...](http://img.usermanuals.tech/thumb/14/56506/w64_canon_ir_advance_c5030i-user-guide-123.png "Page 124
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-72
3Press (Back) or (Next) to
move the focus to [Collate (Page
order)] press (Select).
[Hole Punch] appears only if the
optional puncher unit is attached to an
optional finisher or booklet finisher.
[Saddle Fold] appears only if the
optional booklet finisher is attached.
[Fold] appears only if the optional paper
folding unit is attached.
[Offset] appears only if an optional
finisher is attached.
[Rotate 90 Degrees] appears...")
![Page 125
1
Basic Copy Settings2-73
2
Making Copies in the Voice Navigation Mode
If you want holes made in your out-
put:
❑ Move the focus to [Hole Punch]
press (Select).
NOTE
You may be able to select the type of
holes to punch, depending on your
location or the optional equipment
attached to the machine.
If you want fold made in your out-
put:
❑ Move the focus to [Fold] press
(Select).
❑ Move the focus to desired fold type
and press (Select) press
(Con firm).
If you want to offset the...](http://img.usermanuals.tech/thumb/14/56506/w64_canon_ir_advance_c5030i-user-guide-124.png "Page 125
1
Basic Copy Settings2-73
2
Making Copies in the Voice Navigation Mode
If you want holes made in your out-
put:
❑ Move the focus to [Hole Punch]
press (Select).
NOTE
You may be able to select the type of
holes to punch, depending on your
location or the optional equipment
attached to the machine.
If you want fold made in your out-
put:
❑ Move the focus to [Fold] press
(Select).
❑ Move the focus to desired fold type
and press (Select) press
(Con firm).
If you want to offset the...")
![Page 126
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-74
IMPORTANT
•[Rotate 90 Degrees] can be selected
only in the following cases:
- When LTR and LTRR/A4, A4R, B5, and
B5R paper are loaded
- The selected paper source must have Paper Drawer Auto Selection On/Off in
Function Settings (from the Settings/
Registration screen) set to On. (See
the instruction manuals that came with
your machine.)
•If there is no paper which can be rotated,
the output will be collated.
4Press (Con...](http://img.usermanuals.tech/thumb/14/56506/w64_canon_ir_advance_c5030i-user-guide-125.png "Page 126
Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-74
IMPORTANT
•[Rotate 90 Degrees] can be selected
only in the following cases:
- When LTR and LTRR/A4, A4R, B5, and
B5R paper are loaded
- The selected paper source must have Paper Drawer Auto Selection On/Off in
Function Settings (from the Settings/
Registration screen) set to On. (See
the instruction manuals that came with
your machine.)
•If there is no paper which can be rotated,
the output will be collated.
4Press (Con...")
1 Basic Copy Settings2-69 2 Making Copies in the Voice Navigation Mode IMPORTANT •The Finishing modes cannot be set if Transparency, Tracing Paper, or Labels is selected as the paper type. •The Finishing mode cannot be used with other copy modes, depending on the model of the machine. When the focus moves [Finishing], you hear a message cannot select this with the current settings. NOTE •To use the Staple mode, an optional fi nisher must be attached to the main unit. •The Face Up/Face Down mode enables you to specify whether to output paper face up or face down. Press [Face Up/Face Down], and then select from the following: - [Auto]: If you are copying a single page original, copying on nonstandard size paper, or other available paper that is loaded in the multi-purpose tray, the printed sheets are output face up. Otherwise, the printed sheets are output face down. - [Face Down (Normal)]: Printed sheets are always output face down. - [Face Up (Reverse)]: Printed sheets are always output face up.
Making Copies in the Voice Navigation Mode 1 2 Basic Copy Settings 2-70 • [Face Up/Face Down] may not be available depending on the model of the machine you are using. •If you set the Staple or Hole Punch mode, the side of the paper which is printed on will always be output face down. •The multi-purpose tray is not supported by the Voice Navigation mode. •If the [Finishing] shor tcut key is not displayed on the Copy Basic Features screen, you cannot use the Finishing mode. For information on how to display the shortcut key, see the instruction manuals that came with your machine. Collating Copies into Sets in Page Order Copies are automatically collated into sets arranged in page order. For example, if you copy a three page original, and specify to make three copy sets, three copy sets are output in page order from page 1 to page 3. 1Place your originals. NOTE For instructions on placing originals, see Placing Originals, on p. 2-20.
1 Basic Copy Settings2-71 2 Making Copies in the Voice Navigation Mode 2Press (Back) or (Next) to move the focus to [Finishing] press (Select). The voice guide announces that the Finishing screen is displayed.
Making Copies in the Voice Navigation Mode 1 2 Basic Copy Settings 2-72 3Press (Back) or (Next) to move the focus to [Collate (Page order)] press (Select). [Hole Punch] appears only if the optional puncher unit is attached to an optional finisher or booklet finisher. [Saddle Fold] appears only if the optional booklet finisher is attached. [Fold] appears only if the optional paper folding unit is attached. [Offset] appears only if an optional finisher is attached. [Rotate 90 Degrees] appears only if an optional finisher is not attached.
1 Basic Copy Settings2-73 2 Making Copies in the Voice Navigation Mode If you want holes made in your out- put: ❑ Move the focus to [Hole Punch] press (Select). NOTE You may be able to select the type of holes to punch, depending on your location or the optional equipment attached to the machine. If you want fold made in your out- put: ❑ Move the focus to [Fold] press (Select). ❑ Move the focus to desired fold type and press (Select) press (Con firm). If you want to offset the output: ❑ Move the focus to [Offset] press (Select). If you want to rotate the output: ❑ Move the focus to [Rotate 90 Degrees] press (Select).
Making Copies in the Voice Navigation Mode 1 2 Basic Copy Settings 2-74 IMPORTANT •[Rotate 90 Degrees] can be selected only in the following cases: - When LTR and LTRR/A4, A4R, B5, and B5R paper are loaded - The selected paper source must have Paper Drawer Auto Selection On/Off in Function Settings (from the Settings/ Registration screen) set to On. (See the instruction manuals that came with your machine.) •If there is no paper which can be rotated, the output will be collated. 4Press (Con firm). The display returns to the Regular Copy Basic Features screen. 5Press (Start). Copying starts. NOTE To cancel all settings and return the machine to the Standard mode, press (Reset).
1 Basic Copy Settings2-75 2 Making Copies in the Voice Navigation Mode Grouping Copies of the Same Page Together All copies of the same original page are grouped together. For example, if you copy a three page original and specify to make three copy sets, the first copy set that is output will contain three copies of the first page, the second copy set will contain three copies of page 2, and the third copy set will contain three copies of page 3. 1Place your originals. NOTE For instructions on placing originals, see Placing Originals, on p. 2-20. 2Press (Back) or (Next) to move the focus to [Finishing] press (Select). If necessary, see the screen shot in step 2 of Collating Copies into Sets in Page Order, on p. 2-70. The voice guide announces that the Finishing screen is displayed.
Making Copies in the Voice Navigation Mode 1 2 Basic Copy Settings 2-76 3Press (Back) or (Next) to move the focus to [Group(Same pages)] press (Select). [Hole Punch] appears only if the optional puncher unit is attached to an optional finisher or booklet finisher. [Offset] appears only if an optional finisher is attached. [Saddle Fold] appears only if the optional booklet finisher is attached. [Fold] appears only if the optional paper folding unit is attached.
1 Basic Copy Settings2-77 2 Making Copies in the Voice Navigation Mode [Rotate 90 Degrees] appears only if an optional finisher is not attached. If you want holes made in your out- put: ❑ Move the focus to [Hole Punch] press (Select). NOTE You may be able to select the type of holes to punch, depending on your location or the optional equipment attached to the machine. If you want fold made in your out- put: ❑ Move the focus to [Fold] press (Select). ❑ Move the focus to desired fold type and press (Select) press (Con firm). If you want to offset the output: ❑ Move the focus to [Offset] press (Select).
Making Copies in the Voice Navigation Mode 1 2 Basic Copy Settings 2-78 If you want to rotate the output: ❑Move the focus to [Rotate 90 Degrees] press (Select). IMPORTANT •[Rotate 90 Degrees] can be selected only in the following cases: - When LTR and LTRR/A4, A4R, B5, and B5R paper are loaded - The selected paper source must have Paper Drawer Auto Selection On/Off in Function Settings (from the Settings/ Registration screen) set to On. (See the instruction manuals that came with your machine.) 4Press (Con firm). The display returns to the Regular Copy Basic Features screen. 5Press (Start). Copying starts. NOTE To cancel all settings and return the machine to the Standard mode, press (Reset).