Canon Ir Advance C5030i User Guide

							1
Scan Settings3-45
3
Using the Send and Fax Functions in the Voice Navigation
1Place your originals   specify the 
destination.
NOTE
For instructions on specifying the 
destination, see Flow of Sending 
Operations, on p. 3-5.
2Press   (Back) or   (Next) to 
move the focus to the Select Scan 
Size button   press   (Select).
The voice guide announces that the 
Scan Size selection screen is displayed.
 
						

							Using the Send and Fax Functions in the Voice Navigation
1
3
Scan Settings
3-46
3Select the scan size.
 If you want to the machine 
automatically select the scan size:
❑Move the focus to [Auto]   press 
 (Select).
 
						

							1
Scan Settings3-47
3
Using the Send and Fax Functions in the Voice Navigation
If you want to scan a standard scan 
size:
❑Move the focus to the desired scan 
size   press   (Select).
If you want to scan an 11 x 17 or 
A3+ original with an image that 
extends all the way to the edges 
without the periphery of the original 
being cut off, place the original on the 
platen glass   select [11x17+] or 
[A3+].
 
						

							Using the Send and Fax Functions in the Voice Navigation
1
3
Scan Settings
3-48
NOTE
•To select an A or B series paper size, 
press [A/B-size].
•[A/B-size] is not supported with the Voice 
Navigation mode.
4Press  (Con firm).
The display returns to the Fax Basic 
Features screen.
5Press  (Start).
Density
When scanning, you can adjust the density of 
the most appropriate level for the original.
1Place your originals   specify the 
destination.
NOTE
For instructions on specifying the 
destination, see Flow of Sending 
Operations, on p. 3-5.
 
						

							1
Scan Settings3-49
3
Using the Send and Fax Functions in the Voice Navigation
2Press   (Back) or   (Next) to 
move the focus to [Options]   press 
 (Select).
NOTE
If the [Density] shor tcut key is displayed 
on the Basic Features screen, you can 
select from the Basic Features screen.
3Press   (Back) or   (Next) to 
move the focus to [Density]   press 
 (Select).
The voice guide announces that the 
Density settings screen is displayed.
 
						

							Using the Send and Fax Functions in the Voice Navigation
1
3
Scan Settings
3-50
4Press   (Back) or   (Next) to 
move the focus over the Adjust Basic 
Level indicator   press   (Select).
5To manually set the scan exposure, 
press   (Back) to move the 
indicator between [ ] and [ ] to the 
left to make the exposure lighter. 
Press    (Next) to move the indicator 
to the right to make the exposure 
darker.
The voice guide informs you of the 
position of the indicator (from -4 to +4).
Adjust Basic Level Indicator
 
						

							1
Scan Settings3-51
3
Using the Send and Fax Functions in the Voice Navigation
Example:
If the indicator is in the middle (the 
Standard setting), and you press 
 (Next), the indicator moves to the 
right. You will hear the voice guide say, 
Plus 1.
If the indicator is brought back to the 
middle, you will hear the voice guide 
say, Standard.
When you scan an original, the scan 
exposure is automatically set to 
Standard (between the lightest and 
darkest settings (-4 to +4)). Negative 
numbers make the scanned document 
lighter. -1, is slightly lighter than the 
Standard setting, and -4 is the lightest 
setting. The movement from +1 to +4 
follows the same pattern, making the 
scanned document darker.
6Press  (Select).
 
						

							Using the Send and Fax Functions in the Voice Navigation
1
3
Scan Settings
3-52
7Press  (Con firm).
The selected mode is set.
NOTE
To automatically adjust the background 
density, move the focus to [Auto]   press 
 (Select).
8Press  (Con firm) until you return 
to the Basic Features screen.
9Press  (Start).
 
						

							1
Scan Settings3-53
3
Using the Send and Fax Functions in the Voice Navigation
Original Type
You can manually select the original type 
according to the type of image that you are 
scanning. The following three original type 
modes are available for adjusting the image 
quality.
Text/Photo Mode
This mode is best suited for scanning 
originals containing both text and photos, 
such as magazines or catalogues.
 Photo Mode
This mode is best suited for scanning 
photos printed on photographic paper, or 
photo originals containing halftones (e.g., 
printed photos).
 Text Mode
This mode is best suited for scanning text 
originals. Blueprints or pencil drawn 
originals can also be scanned clearly.
 
						

							Using the Send and Fax Functions in the Voice Navigation
1
3
Scan Settings
3-54
IMPORTANT
•Combinations of these three modes (Text/
Photo, Photo, and Text) cannot be selected 
at the same time. If you select one of these 
modes, the previously set mode is 
canceled.
•If you scan an original containing halftones, 
such as a printed image, using the Photo 
mode, the moir é effect (a shimmering, 
wavy pattern) may occur. In this case, you 
can lessen this moir é effect by using the 
Sharpness mode. For more information on 
the Sharpness mode, see the instruction 
manuals that came with your machine.
NOTE
If the original is a transparency, select the 
original type 
 adjust the exposure to the 
most appropriate level for the original.