Canon Imageprograf Ipf8300 User Guide

7.Push the Cutter Unit Detachment Lever to the left to unlock it.
8. Holding the Cutter Unit by the Lock Lever (a) and grip (b), remove it from the Carriage.
Important•Never  touch  any  part  of  the  Cutter  Unit  except  the  Lock  Lever  (a)  and  grip  (b).  This  may  stain  your
hands or cause injury. Additionally, this may damage the printer.Caution• Dispose of the used Cutter Unit in accordance with local regulations.
• Do not disassemble the Cutter Unit. Touching the blade may cause injury.
9....

10.Lift the Cutter Unit Detachment Lever to lock it.
11. Close the Top Cover.
12.A confirmation message is displayed about the Cutter Unit lock.
Press  ▲ or  ▼ to select " Yes", and then press the  OK button.
13. The Carriage is moved, and a confirmation message is displayed about resetting the cut count.
To reset the cut counter, press  ▲ or  ▼ to select  Yes, and then press the  OK button.
Maintenance 
>
 Cutter Unit 
>Replacing the Cutter UnitiPF8300111014
 

Maintenance Cartridge
Maintenance Cartridge .................................................................................................................................. 1015
Replacing the Maintenance Cartridge ........................................................................................................... 1015
Checking the Remaining Maintenance Cartridge Capacity ...........................................................................1024
 
When to Replace the Maintenance Cartridge...

Make sure the printer is ready for Maintenance Cartridge replacement
You can replace cartridges if the Display Screen advises you to check the remaining capacity or replace the Maintenance
Cartridge.
If a message is displayed requesting Maintenance Cartridge replacement, you can skip the step  Access the menu for Main-
tenance Cartridge replacement.  Follow the instructions in Replace the Maintenance Cartridge.
Caution•Do not replace the Maintenance Cartridge during initialization immediately after...

Replace the Maintenance Cartridge1. At this point, open the Maintenance Cartridge Cover.
2. Hold the used Maintenance Cartridge by the grip (a) with one hand and put your other hand under the Maintenance
Cartridge to hold it firmly on the bottom, keeping it level as you pull it out.
Caution• Used maintenance cartridges are heavy. Always grasp the cartridge firmly and keep the cartridge lev-
el  during  removal  and  storage.  If  you  drop  a  used  Maintenance  Cartridge  or  store  it  at  an  angle,...

3.Open  the  box,  remove  the  plastic  bag,  packaging  material,  and  Shaft  Cleaner,  and  then  take  out  the  Maintenance
Cartridge.Important• Never touch the metal contacts (a). This may damage the Maintenance Cartridge.
4. Attach the packaging material to the used Maintenance Cartridge and put it in the box. Keep it level as you put it in
the plastic bag. Expel excess air from the plastic bag and seal the zipper.
Maintenance 
>
 Maintenance Cartridge 
>Replacing the Maintenance...

5.Confirm the Maintenance Cartridge is right-side up, put it in the box, and store it so that it stays level.Caution•Always put the used Maintenance Cartridge back in the box and store the box on a flat surface. Other-
wise, ink may leak and cause stains.Note• In  accordance  with  active  and  ongoing  environmental  programs,  Canon  supports  recycling  of  used
maintenance  cartridges.  Follow  the  instructions  provided  with  the  new  Maintenance  Cartridge  that describe how to process the used...

7.Keeping the new Maintenance Cartridge level, insert it all the way in.
8.Close the Maintenance Cartridge Cover.
9. Press the  OK button.
The printer now initializes the Maintenance Cartridge.
Next, replace the Shaft Cleaner.
Replacing the Shaft Cleaner
Replace the Shaft Cleaner when you replace the Maintenance Cartridge. New Shaft Cleaner is included with replacement Maintenance Cartridge.
Maintenance 
>
 Maintenance Cartridge 
>Replacing the Maintenance CartridgeiPF8300111020
 

After you execute Repl. maint cart and replace the Maintenance Cartridge, a message will appear on the Display Screen
requesting you to replace the Shaft Cleaner. Select  Yes and press the  OK button. When a message requests you to open the
Top Cover, go to step 5.
1. On the  Tab Selection screen  of the Control Panel, press  ◀ or  ▶ to select the Settings/Adj. tab (
).
Note•If the  Tab Selection screen  is not displayed, press the  Menu button.
2.Press the  OK button.
The  Set./Adj. Menu  is displayed....

6.Hold the Shaft Cleaner on the right side of the Carriage by the grips (a) and pull it to the right to remove it.Important•Do not touch the Linear Scale (a), Carriage Shaft (b), or Fixed Blade (c).
Maintenance 
>
 Maintenance Cartridge 
>Replacing the Maintenance CartridgeiPF8300111022