Canon Imageprograf Ipf8300 User Guide

Configuring NetWare Network SettingsTo print over a NetWare network, configure the network environment as follows.Important• To  configure  network  settings,  you  must  be  logged  in  with  administrative  rights  such  as  Administrator ac-
count. We recommend that your network administrator configure the network settings.
1. Specify the Ethernet frame type for communication between the printer and computers.
For instructions,  see "Specifying the Printer's Frame Type ."
→P.965
2. Specify...

Network Setting (Mac OS X)
Configuring the Printer Driver Destination  ...................................................................................................... 974
 
Configuring the Printer's AppleTalk Network Settings ..................................................................................... 974
Configuring the Destination for AppleTalk Networks  ...................................................................................... 975
Configuring the Destination in TCP/IP...

*1: The object name you have specified in Name is displayed in  Printer Setup Utility  (or Print Center  ) in Mac OS
X  10.2.8–10.4.  If  you  use  multiple  printers  in  the  same  zone,  assign  a  unique  name  to  each  printer.  By  default,
the  network  interface  name  is  Canon  NB-18GB  (xxxxxx).  (Here,  xxxxxx  is  the  last  six  digits  of  the  printer's
MAC address.)
*2:  If  zones  have  been  created  on  the  network,  enter  the  name  of  the  printer's  zone.  If  there...

6.Press the  Menu button.
If you have changed any settings, a confirmation message is displayed. In this case, press the  OK button.Important•Be sure to complete step 6. This will activate the values you have entered.Note•By  using  RemoteUI,  you  can  also  specify  the  object  name  used  for  AppleTalk,  as  well  as  the  printer  zone
name.
For details on RemoteUI,  see "Using RemoteUI ."
→P.955
Configuring the Destination (Mac OS X)
Important•AppleTalk is supported in Mac OS X...

2.In Show , choose  Built-in Ethernet . Next, click AppleTalk, select Make AppleTalk Active , and click Apply now .
3.Close the  Network window and save the settings.
Configuring the Destination in TCP/IP Networks
Follow these steps to configure the destination when using the printer in a TCP/IP network.
Important• If  you  use  the  printer  in  a  TCP/IP  network,  make  sure  the  printer's  IP  address  is  configured  correctly.    (See
" Configuring the IP Address Using the Printer Control...

2.Click  Next.
3.Click  Registering IP Address .
4.Select the model and type and then enter the IP address before clicking the  Next button.
Network Setting 
>
 Network Setting (Mac OS X) 
>Configuring the Destination in TCP/IP NetworksiPF830010978
 

5.Complete  Printer Name  and Location  as desired and click  Register.
6.Click  Finish .
Configuring the Destination for Bonjour Network
Follow the steps below to configure the destination if you are using the printer in a network that uses the Bonjour function.
Important• Bonjour and  IP Print (Auto)  do not support printing to a printer on other network groups that require a rout-
er  for  connection.  Make  sure  the  computer  and  printer  are  on  the  same  network.  For  information  about...

2.Click  Next.
3.Select the printer to register and click  Next.
4.Complete  Printer Name  and Location  as desired and click  Register.
Network Setting 
>
 Network Setting (Mac OS X) 
>Configuring the Destination for Bonjour NetworkiPF830010980
 

5.Click  Finish .Network Setting 
>
 Network Setting (Mac OS X) 
>iPF8300Configuring the Destination for Bonjour Network10981
 

Maintenance
Ink Tanks983
Printheads998
Cutter Unit1011
Maintenance Cartridge1015
Cleaning the Printer1026
Other Maintenance1031
Maintenance 
>iPF830011982