Canon Imageprograf Ipf8300 User Guide

Number of nozzles2,560 per color
*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Interface
USB (*1→P.943 )FormatInternal portModeFull-speed (12 Mbps), high-speed (480 Mbps), bulk transferConnectorSeries B (4-pin)EthernetFormatInternal portSpecificationIEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX/Auto-Negotiation, IEEE
802.3ab1000Base-T/Auto-Negotiation, IEEE 802.3x Full DuplexProtocolsIPX/SPX (Netware 4.2, 5.1, 6.0), SNMP, TCP/IP (IPv4 and IPv6), AppleTalk, HTTP
*1: Use in Hi-Speed...

Ink TankBK Ink Tank ( Black
Ink )Pigment inkPFI-304BK (330 ml or 11.2 fl oz) or PFI-704BK (700 ml or
23.7 fl oz)Capacity330 or 700 ml (11.2 or 23.7 fl oz) per color ( *1→P.944)
*1: The provided Starter Ink Tanks contain 330 ml (11.2 fl oz) each.
Paper ( *1→P.944)
Roll weight10 kg (22.0 lb) max.Paper widthRolls254–1,118 mm (10.0–44.0 in)Sheets203–1,118 mm (8.0–44.0 in)Length of
one pageRolls203( *2→P.944 )-18,000 mm (8.0–708.7 in)Sheets203–1,600 mm (8.0–63.0 in)ThicknessRolls0.07–0.8 mm (0.0028–0.031...

Hard DiskHard disk capacity80 GB (print job storage capacity: 48
GB)Print job storage capacityCommon Box100 jobsPersonal Boxes100 jobs
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless print-
ing, the actual printing area corresponds to the paper size minus the space for this margin.
Note• Printable Area: The area that can be printed.
• There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.
•...

Rolls
•
Printable Area:
A  margin  of  5  mm  (0.20  in)  on  all  sides  is  required.  During  borderless  printing,  the  margin  on  all  sides  is  0  mm.  Forinformation  on  paper  compatible  with  borderless  printing,  see  the  Paper  Reference  Guide.    (See  "Types  of  Paper .")
→P.768
•
Recommended Print Area:
A margin of 20 mm (0.79 in) on top, 5 mm (0.20 in) on bottom, and 5 mm (0.20 in) on left and right sides is required.
Printer Parts 
>
 Printer Specifications 
>Print...

Network Setting
Network Setting948
Network Setting (Windows)963
Network Setting (Mac OS X)974
Network Setting 
>iPF830010947
 

Network Setting
Network Environment ...................................................................................................................................... 948
 
Configuring the IP Address on the Printer ....................................................................................................... 951
Configuring the IP Address Using the Printer Control Panel .......................................................................951
Configuring the IP Address Using ARP and PING...

•Windows 7
• Windows Vista x64
• Windows Server 2008 x64
• Windows 7 x64
• Mac OS X 10.3.9 or laterNote•When  using  IPv6,  you  must  specify  IPv6  on  the  Control  Panel  or  in  RemoteUI.  For  instructions,  see
" Configuring  TCP/IPv6  Network  Settings ."
→P.954  or see  " Configuring  the  Printer's  TCP/IP  Net-
work Settings ."
→P.956
• The imagePROGRAF printer driver is supported in Mac OS X 10.3.9 or later.
• The imagePROGRAF printer driver is not compatible with Unix.
•...

•Example of a Windows network
In Windows networks, print over TCP/IP.
Note•NetBIOS is not supported.
•
Example of a Macintosh network
In Macintosh networks, print over AppleTalk (EtherTalk) or TCP/IP, using Bonjour (Zeroconf) functions.
Note•The imagePROGRAF printer driver is not compatible with AppleTalk.
•
Example of a NetWare network
Network Setting 
>
 Network Setting 
>Network EnvironmentiPF830010950
 

Note•Even if there is a NetWare server in your network environment, you can use it in conjunction with TCP/
IP or AppleTalk. In this case, complete the settings for each protocol you will use.
Configuring the IP Address on the Printer
You must configure the printer's IP address before using the printer in a TCP/IP network.
The printer's IP address is configured automatically when you install the printer driver following the instructions in the Set-
up Guide.
Configure the IP address by using...

2.Press the  OK button.
The  Set./Adj. Menu  is displayed.
3. Press  ▲ or  ▼ to select  Interface Setup , and then press the  OK button.
4. Press  ▲ or  ▼ to select  TCP/IP, and then press the  OK button.
5. Press  ▲ or  ▼ to select  IPv4, and then press the  OK button.
6. Press  ▲ or  ▼ to select  IPv4 Settings , and then press the  OK button.
7. Press  ▲ or  ▼ to select  IP Address , and then press the  OK button.
8. After you press  ◀ or  ▶ to select the input field, numerical input is possible.
9....