Canon Imageprograf Ipf8300 User Guide

Setting ItemDescription, InstructionsManageRemainRollChoose On to print a barcode at the end of a roll before you
remove it. The printed barcode can be used in managing the
amount of roll paper left. Choose  Off if you prefer not to
print the barcode.  (See " Keeping Track of the Amount of Roll Paper Left .")
→P.791
Paper Details(The type of pa-
per is displayed
here.)
( *1
→P.914 )
Head HeightAdjust the Printhead height.   (See "Troubleshooting Paper
Abrasion and Blurry Images (Head Height)...

Setting ItemDescription, InstructionsPaper Details(The type of pa-
per is displayed
here.)
( *1
→P.914 )
NearEnd Sht
MrgnSpecify a margin at the leading edge of sheets to ensure bet-
ter printing quality at the leading edge.
Note that if you choose  5mm, it may lower the printing
quality at the leading edge and affect feeding accuracy. The printed surface may be scratched, and ink may adhere to the
leading edge.Bordless Mar-
ginAdjust the margin during borderless printing. Choose  Automatic  to have the...

Setting ItemDescription, InstructionsPrint
JobJob List(Choose
a print
job.)Preempt JobsPrint the job first after the current print job is finished.
 (See " Managing the Job Queue (Deleting or Preempt-
ing Other Jobs) .")
→P.719
Stored
JobMailbox
List(Enter a
pass-
word if
one has
been
set.)Job ListPrintPrint the saved job.DeleteDelete the saved job.Print Job ListPrint a list of saved print jobs.Job Log(Choose
from in-
forma-
tion
about
the last
three
print
jobs.)Document NameIndicates the...

Set./Adj. MenuSetting ItemDescription, InstructionsTest
PrintNozzle CheckPrint a test pattern to check the nozzles.Status PrintPrint information about the printer.Interface PrintPrint interface settings information.Paper DetailsPrint the paper settings as specified in  Paper Details.Print Job LogPrint a record of print jobs, including the paper type
and size, amount of ink consumed, and so on. Ink
consumption indicates a rough estimate of the
amount of ink consumed per print job.
( *1
→P.923 )
Menu...

Setting ItemDescription, InstructionsAdjust
PrinterFeed
Priori-
tyAdj.
Quali-
tyAuto(OtherPaper)The printer prints and reads a test pattern for auto-
matic adjustment of the feed amount. Note that this
function takes more time and consumes more ink than  Auto(GenuinePpr) .  (See " Automatic Banding
Adjustment (Adj. Quality) .")
→P.846
ManualUse this mode with highly transparent media or other
paper for which  Auto(GenuinePpr)  or Auto(Other-
Paper)  cannot be used.
Print a test pattern for...

Setting ItemDescription, InstructionsMain-
te-
nanceReplace P.headExecute when replacing the Printhead. Follow the in-
structions displayed to complete the required proce-
dure.   (See " Replacing the Printhead .")
→P.1000
Not displayed during a warning message that the re- maining Maintenance Cartridge capacity is low.
Repl. maint cartExecute when replacing the Maintenance Cartridge.
Follow the instructions displayed to complete the re- quired procedure.   (See "Replacing the Mainte-
nance...

Setting ItemDescription, InstructionsInter-
face
SetupTCP/
IPIPv6DNS
Set-
tingsDNS
Dync
updateState-
full
AddrSpecify whether DNS server registration is updated
automatically.State-
less
AddrPri. DNS
SrvAddrSpecify the DNS server address.Sec. DNS
SrvAddrDNS Host NameSpecify the DNS host name.DNS Domain
NameSpecify the DNS domain name.Net-
WareNetWareSpecify the NetWare protocol. To apply your
changes, choose  Register Setting .Frame TypeSpecify the frame type to use.Print ServiceChoose the print...

Setting ItemDescription, InstructionsSystem
SetupTime ZoneSpecify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.Length UnitChoose the display unit for length. Change the unit
displayed for the remaining amount of roll paper,
Tot.Print Area , and so on.Detect MismatchSpecify printing behavior if the type and size of pa-
per specified in the printer menu does not match the
type and size in the printer driver.
Choose  Pause to have...

Setting ItemDescription, InstructionsSystem
SetupRep.P.head PrintChoose  On to have the printer automatically execute
the  Advanced Adj.  operations after you replace the
Printhead.   (See "Automatic Adjustment to Straight-
en Lines and Colors (Head Posi. Adj.) .")
→P.839
Nozzle CheckIn Frequency , specify the timing for automatic
checks of nozzle clogging. Choose  Standard to have
the printer adjust the timing for checks based on the
frequency of nozzle use. Choose  1 page to check
once per...

Setting ItemDescription, InstructionsTake-
up
ReelUse Take-up ReelSelecting  Enable allows use of the Media Take-up
Unit.Auto FeedAvailable only if  Use Take-up Reel  is already set to
Enable . Rolls are automatically advanced to the po-
sition for attachment to the Rewind Spool.Skip Take-Up ErrAvailable only if  Use Take-up Reel  is already set to
Enable .
Choose  On to continue with printing even if an error
occurs with the Media Take-up Unit. Choose  Off to
pause printing if a take-up error...