Canon Imageprograf Ipf8300 User Guide

•Press  Back  to  access  a  higher  menu  in  the  menu  list,  and  press  OK to  access  a  lower  one.  If  not  all  menu  items  are
displayed, hold down  ▲ or  ▼ to scroll through higher and lower menu items. Items you select are highlighted.
The scroll bar at right indicates the current position in the overall menu.
• Lower menus are available if 
 is displayed at left next to the second and subsequent rows. To access the lower me-
nus, select the menu and press the  OK button.
Specifying menu...

Specifying numerical valuesFollow these steps to enter numbers. In this example, network settings items are entered.
1. Press the  ◀ or  ▶ button to move to the next field for input.
2. Press the  ▲ or  ▼ button to enter the value.
Note•Hold down  ▲ or  ▼ to increase or decrease the value continuously.
3. Repeat steps 1 and 2 to complete the settings, and then press the  OK button.
Note•If  a  confirmation  message  is  displayed  regarding  the  setting  you  entered,  press  the  OK button.  The...

First LevelSecond LevelThird LevelFourth LevelChg. Paper Type
( *1
→P.906 )
Cut Sheet(The type of paper is displayed here.) ( *1→P.906)Chg. Paper SizeSheet Size
( *2
→P.906 )
(The size of paper is displayed here.) ( *3→P.906)Roll Length  (*4→P.906 )
Roll Width  (*2
→P.906 )
ManageRemainRollOff *
OnPaper Details(The type of paper is dis-
played here.)
( *1
→P.906 )
Head HeightAutomatic  *
Highest
High
Standard
Low
Lowest
Super LowSkew Check Lv.Standard  *
Loose
OffCutting ModeAutomatic
Eject
ManualCut...

First LevelSecond LevelThird LevelFourth LevelPaper Details(The type of paper is dis-
played here.)
( *1
→P.906 )
NearEnd RollMrgn20mmNearEnd Sht Mrgn5mm
20mmBordless MarginAutomatic
FixedWidth DetectionOff
On  *Return DefaultsPaper DetailsKeep Paper TypeOff  *
On
*1:   For information on the types of paper the printer supports, refer to the Paper Reference Guide.   (See "Types of
Paper .")
→P.768  Types of paper in the printer driver and related software (as well as on the Control Panel )
are...

First LevelSecond LevelThird LevelFourth LevelFifth LevelJob Log(Choose from infor-
mation about the lat-
est three print jobs.)InterfaceUSB
Network
HDDInk Consumed(The total amount of
ink consumed and
ink colors are dis-
played here.)xxx.xxx mlPrint settings
Head Height
Temp./Humidity
Adjustment req.Print Job LogPause PrintOff  *
OnHDD InformationTotal capacity
Box free space
*1:   If a pending job is selected,  Print Anyway is displayed.
Set./Adj. Menu
First LevelSecond Lev-
elThird LevelFourth...

First LevelSecond Lev-elThird LevelFourth LevelFifth LevelSixth LevelSeventh LevelAdjust
PrinterCalibrationUse Adj.
ValueDisabled
Enabled  *Return DefaultsMaintenanceHead Clean-
ingHead Cleaning A
Head Cleaning BNozzle CheckReplace
P.headPrinthead L
Printhead R
L & R PrintheadsRepl. maint cartHead InfoPrinthead L
Printhead RRepl. S. Cleaner
Change CutterInterface
SetupEOP Timer
( *5
→P.912 )
10 sec.
30 sec.
1 min.
2 min.
5 min.
10 min.  *
30 min.
60 min.TCP/IP
( *5
→P.912 )
IPv4IPv4 ModeAutomatic
Manual...

First LevelSecond Lev-elThird LevelFourth LevelFifth LevelSixth LevelSeventh LevelInterface
SetupTCP/IP
( *5
→P.912 )
IPv6DHCPv6
( *8
→P.912 )
On
Off  *DNS Set-
tings
( *7
→P.912 ),
( *8
→P.912 )
DNS Dync
updateStatefull
AddrOn
Off  *Stateless
AddrOn
Off  *Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain NameNetWare
( *5
→P.912 )
NetWareOn
Off  *Frame Type
( *9
→P.912 )
Auto Detect
Ethernet 2
Ethernet 802.2  *
Ethernet 802.3
Ethernet SNAPPrint Service
( *9
→P.912 )
BinderyPServer
RPrinter...

First LevelSecond Lev-elThird LevelFourth LevelFifth LevelSixth LevelSeventh LevelSystem Set-
upSleep Timer240 min.BuzzerOff
On  *Contrast
Adj.-4,-3,-2,-1,0*,+1,+2,+3,+4Date & Time
( *5
→P.912 )
Dateyyyy/mm/dd  (*11→P.912 )Timehh:mmDate Format
( *5
→P.912 )
yyyy/mm/dd  *
dd/mm/yyyy
mm/dd/yyyyLanguage*Time Zone
( *5
→P.912 )
0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
+3:Moscow
+4:Eerevan,Baku
+5:Islamabad
+6:Dacca
+7:Bangkok
+8:Hong Kong
+9:Tokyo,Seoul
+10:Canberra
+11NewCaledonia
+12:Wellington...

First LevelSecond Lev-elThird LevelFourth LevelFifth LevelSixth LevelSeventh LevelSystem Set-
upDetect Mis-
matchPause
Warning
None  *
Hold JobPaper Size
BasisSht Selection
1ISO A3+  *
13"x19"(Super B)Sht Selection
2ISO B1  *
28"x40" (ANSI F)Keep Paper
SizeOff  *
OnRep.P.head
PrintOff
On  *Nozzle
CheckFrequencyStandard  *
1 pageWarningOff  *
OnCarriageS-
canWdthAutomatic  *
FixedUse Remo-
teUI
( *5
→P.912 )
On *
OffReset PaprSetngs  (*5→P.912 )Erase HDD
DataHigh Speed  (*5→P.912 )
Secure...

First LevelSecond Lev-elThird LevelFourth LevelFifth LevelSixth LevelSeventh LevelPrep.Move-
PrinterLevel 1  *
Level 2
Level 3Admin.
Menu
( *5
→P.912 )
Change Password  (*7→P.912 )
Init.Admin.Pswd  (*7
→P.912 )
Printer InfoPaper Info
Ink InfoHead InfoPrinthead L
Printhead RSystem Info
Error Log
Other Counter
*1:   Available after you have used  Auto(Advanced) in Head Posi. Adj.  once.
*2:   Displayed if a sheet is loaded in the printer.
*3:   Available if  Adj. Priority is Automatic  or Print Quality ....