Canon Imageprograf Ipf8300 User Guide

4.Press  ▲ or  ▼ to select the type of paper, and then press the  OK button.Note•When  VacuumStrngth   is  set  to Automatic ,  the  setting  value  selected  for  the  previous  print  job  is
displayed (to the right of  Automatic ) once you select the type of paper currently supplied.
However, the value is cleared when the printer is turned off or the paper is replaced.
5. Press  ▲ or  ▼ to select  VacuumStrngth , and then press the  OK button.
6. Press  ▲ or  ▼ to select the desired setting value, and...

Color adjustment
Using Color Calibration for Color Adjustment .................................................................................................. 854
 
Printing in Ideal Colors for Light in the Viewing Environment .......................................................................... 856
Selecting Color Tones on Charts Before Printing (Windows) .....................................................................857
Selecting Color Tones on Charts Before Printing (Mac OS X)...

SatinPhoto 240—CompatibleCompatibleComm Proofing—CompatibleCompatibleOpaque Paper—Compatible—
•The  color  calibration  adjustment  value  is  applied  in  all  print  jobs,  including  jobs  with  paper  other  than  the
paper used for color calibration, ensuring that the optimal value is always applied when printing.
• You  can  choose  whether  or  not  to  apply  color  calibration  in  printing  from  the  printer  driver  or  the  Control
Panel menu. Printer driver settings are given priority.
For...

•Loading Sheets in the Printer→P.802
2. On the  Tab Selection screen  of the Control Panel, press  ◀ or  ▶ to select the Settings/Adj. tab (
).
Note•If the  Tab Selection screen  is not displayed, press the  Menu button.
3.Press the  OK button.
The  Set./Adj. Menu  is displayed.
4. Press  ▲ or  ▼ to select  Adjust Printer , and then press the  OK button.
5. Press  ▲ or  ▼ to select  Calibration , and then press the  OK button.
6. Press  ▲ or  ▼ to select  Auto Adjust , and then press the  OK button.
The...

Important•This function requires the i1 spectrophotometer. The Light Source Measure Tool must also be installed.
• You can install the Light Source Measure Tool from the User Software CD-ROM.
• For a list of supported i1 devices, refer to the manual provided with the Light Source Measure Tool.
• This function is only supported in Windows and Mac OS X 10.4 or later.
• The colors in this function may differ slightly depending on the system software used (Windows 32/64 bit or
Macintosh).
For instructions on...

4.In the  AMedia Type  list, select the type of paper that is loaded (for example,  Premium Glossy Paper 200 ).Important•Ambient  light  matching  may  not  be  available,  depending  on  the  type  of  paper  used.  For  more  infor-
mation, see the Paper Reference Guide.(See " Types of Paper
→P.768")
5.Click  DAdvanced Settings  to switch the print mode.
6.In FPrint Quality , click Highest  or High .
Important• Ambient Light Adjust  is only available when the  FPrint Quality  is set to Highest...

9.Click the  Matching  tab to display the  Matching sheet.
10.Make sure  Driver Matching Mode  is selected in AMatching Mode .
Note•To specify monitor matching, select  Monitor Matching in BMatching Method . In this case, select
the same color space as when the file was opened in  CColor Space  and the monitor color tempera-
ture in  DMonitor White Point .
11.Select  EUse ambient light adjustment .
12. Click FAmbient Light Adjust  to display the Ambient Light Adjust  dialog box.
13.Confirm that  By...

14.Click BPrint Chart .
Light Source Check Tool  now starts up.
15.Check the settings and click  DPrint .
The  Chart  is printed.
Adjustments for Better Print Quality 
>
 Color adjustment 
>Selecting Color Tones on Charts Before Printing (Windows)iPF83008860
 

16.In  the  viewing  environment,  determine  the  number  of  the  set  of  images  on  the  Chart in  which  all  four  vertical  im-
ages have the best overall color tone.Note• Choose  the  number  of  the  set  of  images  in  which  the  people,  the  blue  of  the  sky,  and  the  red  of  the
strawberries look the most natural overall.
17. In the Ambient Light Adjust  dialog box, select the number of your preferred chart in  CChart Number .
18.If Matching  Method   is  set  to Monitor  Matching...

3.Make sure the  Main panel is displayed.
4.In the  AMedia Type  list, select the type of paper that is loaded (for example,  Premium Glossy Paper 200 ).
Important•Ambient  light  matching  may  not  be  available,  depending  on  the  type  of  paper  used.  For  more  infor-
mation, see the Paper Reference Guide.  (See "Types of Paper .")
→P.768
5.Click  DAdvanced Settings  to switch the print mode.
Adjustments for Better Print Quality 
>
 Color adjustment 
>Selecting Color Tones on Charts...