Canon Imageprograf Ipf8300 User Guide

c.Basket Arm R and Basket Arm L
Holds the Basket Rod (tag side) attached to the Output Stacker. When the Output Stacker is not used, push it down andstore it next to the Stand Leg.
d.
Basket Rod (tag side) and Basket Rod (cord side)
Holds the cloth Output Stacker securely in specific positions.
e.
Basket Rod
Keeps Basket Arm R and Basket Arm L at the same angle.
f.
Rod Holder
Holds the middle of the Basket Rod (cord side).
 (See " Using the Output Stacker .")
→P.813
Using the Output Stacker
The...

•When the Output Stacker is not used
Use position (2).
•
When the Media Take-up Unit is used, or when the Output Stacker is stored for long periods
Lower it to position (3) for storage.  (See "Storing the Output Stacker .")→P.819
When  using  the  Output  Stacker  again  after  storage,  reattach  the  Basket  Rod  on  the  front  of  the  Output  Stacker  to  the tips of the left and right basket arms and pull it out completely.
•
When printing on large, stiff sheets
Use position (3).
Set  it...

Using the output stacker for ejection in front
You can also set the stacker to the following position when printing banners or when printing on delicate paper.
Note• When using the stacker for ejection in front, always select  Cutting Mode > Eject . Selecting  Automatic may
damage printed documents.   (See "Specifying the Cutting Method for Rolls .")
→P.794
• During ejection in the front of the printer, be especially careful when using delicate paper or paper that curls
easily.
• Depending  on...

2.Remove the Output Stacker from the printer.
Remove  the  front  Basket  Rod  from  the  left  and  right  basket  arms,  and  remove  the  back  Basket  Rod  and  black  cord
from the Rod Holder.Handling Paper 
>
 Output Stacker 
>Using the Output StackeriPF83007816
 

3.Stow  the  left  and  right  basket  arms.  Next,  with  the  Rod  Holder  still  attached,  remove  the  Rod  Holder  Adapter  and
put it in front of the printer.
4. Pull out the left and right Basket Hooks from the Ejection Guide.
Handling Paper 
>
 Output Stacker 
>iPF8300Using the Output Stacker7817
 

5.Attach the Basket Rod to the Basket Hooks so that the white tag of the Basket Cloth is on the left.
6. Form the Basket Cloth into a sloping shape to make it taut, and attach the middle Basket Rod to the Rod Holder.
Handling Paper 
>
 Output Stacker 
>Using the Output StackeriPF83007818
 

Storing the Output Stacker
Stow the Output Stacker if you will use the Media Take-up Unit or if you will not use the Output Stacker for an extended
period.
1. When the Output Stacker is in the position used when storing printed documents (a), lift the front Basket Rod gently
to release the lock, lower the stacker toward the front (b), and push it all the way back.
2. Remove the front Basket Rod from the left and right basket arms. Roll up the Basket Cloth and put it at the back of
the Bottom Stand Stay....

Important•When  using  the  optional  Media  Take-up  Unit,  position  the  Basket  Cloth  and  Basket  Rod  so  they  do
not interfere with the Media Take-up Sensor (indicated by the dashed line).
3. Push in the left and right basket arms toward the back all the way, until they stop.
Handling Paper 
>
 Output Stacker 
>Storing the Output StackeriPF83007820
 

Media take-up unit
Media Take-up Unit (Optional) ........................................................................................................................ 821
 
Using the Media Take-up Unit (Optional) ........................................................................................................ 821
Enabling Roll Take-Up .................................................................................................................................... 822
Disabling Roll Take-Up...

5.Print on the roll.
6. Turn off the Media Take-up Unit.
7. Remove the printed document from the media take-up unit.   (See "Removing Printed Documents from the Media
Take-up Unit (Optional) .")
→P.831
8. Disable roll take-up.   (See "Disabling Roll Take-Up .")
→P.823
Important•The Media Take-up Unit cannot be used with sheets.
• If you have attached the Output Stacker, always stow it before using the Media Take-up Unit.   (See "Storing
the Output Stacker .")
→P.819
Arrange the...