Canon Imageprograf Ipf8300 User Guide

9.Close the Top Cover.
10. Once paper feeding starts, you will need to do the following, based on the  ManageRemainRoll setting and the bar-
code printed on rolls.   (See "Keeping Track of the Amount of Roll Paper Left .")
→P.791
Manag-
eRemain- Roll
BarcodesPrinter Operation After the Paper is Fed
OffPrintedA menu for selection of the type of paper is automatically shown on the Display Screen.
Press  ▲ or  ▼ to select the type of paper, and then press the  OK button.Not prin-
tedOnPrintedThe...

Changing the Type of Paper
Follow these steps to change the type of paper specified on the printer after you have loaded paper.
If you will continue using this type of paper later, selecting  Keep Paper Type > On  will save the time and effort of config-
uring the media type setting when you load the paper again. The current media type settings before you select  On will be
automatically selected at that time.   (See "Using the Same Type of Paper Regularly .")
→P.785
Important•For  best  printing...

Using the Same Type of Paper RegularlyConfigure this setting so that current media type settings will be automatically selected when you load the same type ofpaper later.
1. On the  Tab Selection screen  of the Control Panel, press  ◀ or  ▶ to select the Paper tab (
).
Note•If the  Tab Selection screen  is not displayed, press the  Menu button.
2.Press the  OK button.
The  Paper Menu  is displayed.
3. Press  ▲ or  ▼ to select  Keep Paper Type , and then press the  OK button.
4. Press  ▲ or  ▼ to select...

Note•If the  Tab Selection screen  is not displayed, press the  Menu button.
2.Press the  OK button.
The  Paper Menu  is displayed.
3. Press  ▲ or  ▼ to select  Chg. Paper Size , and then press the  OK button.
4. Press  ▲ or  ▼ to select  Roll Length , and then press the  OK button.
5. Press  ▲ or  ▼ to select the length of paper loaded in the printer, and then press the  OK button.
Specify the roll length as follows.
1. Press the  ◀ or  ▶ button to move to the next field for input.
2. Press the  ▲ or  ▼...

4.Press  ▲ or  ▼ to select " Yes", and then press the  OK button.
The roll is now rewound and ejected.Caution• If  you  have  selected  ManageRemainRoll  > On   in  the  Control  Panel  menu,  a  barcode  is  printed  on
the leading edge of the roll.
Do not remove the roll before the barcode is printed. You will be unable to keep track of the amount of roll paper left.   (See "Keeping Track of the Amount of Roll Paper Left .")
→P.791
5.Open the Top Cover and lift the Ejection Guide....

7.Holding the Roll Holder flange (a), remove the holder from the Roll Holder Slot.Note•For  instructions  on  removing  the  Roll  Holder  from  rolls,  see  "Removing  the  Roll  Holder  from
Rolls ."
→P.789
8.Lower the Ejection Guide and close the Top Cover.
Note•To load new paper in the printer at this point,  see "Loading Rolls in the Printer ."→P.777
• Clean inside the top cover before loading paper.
 (See " Cleaning Inside the Top Cover .")
→P.1026
Handling Paper 
>...

Removing the Roll Holder from Rolls1. Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at the position indica-
ted (b), remove it from the Roll Holder.
2. Remove the Roll Holder from the roll.
3. When removing attachments, push the tips (a) in as you remove the attachment.
•3-Inch Paper Core Attachment #1 ( Roll Holder side)
Handling Paper 
>
 Handling rolls 
>iPF8300Removing the Roll Holder from Rolls7789
 

•3-Inch Paper Core Attachment #2 ( Holder Stopper side)
•2-Inch Paper Core Attachment
Important•Store the roll in the original bag or box, away from high temperature, humidity, and direct sunlight. If paper
is  not  stored  properly,  the  printing  surface  may  become  scratched,  which  may  affect  the  printing  quality when you use it again.
Feeding Roll Paper Manually
After a roll has been advanced, you can press the  Feed button to feed or retract the roll with the  ▲ and  ▼ buttons.
1. Press the...

Note•If you hold down  ▲ or  ▼ for less than a second, the roll will move about 1 mm (0.04 in).
If you hold down  ▲ or  ▼ for more than a second, the roll will move until you release the button. Release the
button when the Display Screen indicates " End of paper feed. Cannot feed paper more. ".
Keeping Track of the Amount of Roll Paper Left
Setting  ManageRemainRoll  to On  in the  Paper Menu  of the Control Panel will print a barcode with text on the roll when
the roll is removed that identifies...

Specifying the Ink Drying Time for Rolls
When you are using paper that takes longer for ink to adhere, if the Cutter touches printed surfaces that are still wet, it may
damage the paper or cause rough cut edges. Also, ink may be transferred onto the paper surface during ejection, soiling it. You can prevent problems by adjusting the drying time after printing before the paper is cut.
Windows
1. Display the printer driver dialog box.
 (See " Accessing the Printer Driver Dialog Box from the Operating...