Canon Imageprograf Ipf8300 User Guide

3.In  the  Paper  Detailed  Settings   dialog  box  displayed  next,  select  the  desired  settings  values  in  BBetween  Pages
and  CBetween Scans  in ADrying Time , and then click  OK.
 (See " Paper Detailed Settings Dialog Box (Windows) .")
→P.213
Mac OS X
1. Choose  Print in the application menu.
2. Select the  Main pane and click  CSettings  in AMedia Type .
Handling Paper 
>
 Handling rolls 
>iPF8300Specifying the Ink Drying Time for Rolls7793
 

3.In  the  Paper  Detailed  Settings   dialog  box  displayed  next,  select  the  desired  settings  values  in  CBetween  Pages
and  DBetween Scans  in BDrying Time , and then click  OK.
 (See " Paper Detailed Settings Dialog Box (Mac OS X) .")
→P.492
Note•By factory default,  Drying Time is deactivated (  Off ) for all paper types.
• To have the printer wait for ink to dry immediately after printing without releasing paper, set  Cutting Mode
to  Eject  in the printer menu.
 (See "...

Cutting MethodPrinter SettingDriver SettingPaper
Cut-
ting
→P.798
Auto Cut
 (See
" Cutting
Roll Pa-
per After
Print-
ing .")
→P.190
Choose this option if you want to cut pages by
pressing Cutter Unit buttons for manual cutting
after printing when  Auto Cut > No  is selected
or  Print Cut Guideline  is selected in the print-
er driver.
Otherwise choose this option if you want to cut
the roll edge after loading a roll.Cut  but-
ton press-
edYesNo  Print
Cut
Guide-
lineNote• Automatic and Eject are...

Note•If the  Tab Selection screen  is not displayed, press the  Menu button.
2.Press the  OK button. The  Paper Menu  is displayed.
3. Press  ▲ or  ▼ to select  Paper Details , and then press the  OK button.
4. Press  ▲ or  ▼ to select the type of paper, and then press the  OK button.
5. Press  ▲ or  ▼ to select  Cutting Mode , and then press the  OK button.
6. Press  ▲ or  ▼ to select  Eject, and then press the  OK button.
7. Print the job.
When printing is finished, the printer will stop without...

1.On the  Tab Selection screen  of the Control Panel, press  ◀ or  ▶ to select the Paper tab ().Note•If the  Tab Selection screen  is not displayed, press the  Menu button.
2.Press the  OK button. The  Paper Menu  is displayed.
3. Press  ▲ or  ▼ to select  Paper Details , and then press the  OK button.
4. Press  ▲ or  ▼ to select the type of paper, and then press the  OK button.
5. Press  ▲ or  ▼ to select  Cutting Mode , and then press the  OK button.
6. Press  ▲ or  ▼ to select  Manual, and then press...

9.Cut the roll paper manually with scissors or the like.
10. Press the  OK button.
After the roll is rewound, it stops automatically.
Paper cutting (to have the roll cut at your specified position)
1. Press the  Feed button.
Handling Paper 
>
 Handling rolls 
>Specifying the Cutting Method for RollsiPF83007798
 

2.Press the  ▼ button to advance the roll to the position for cutting.
3. Press the  Cut button.
4. Press  ▲ or  ▼ to select  Yes, and then press the  OK button.
After the roll paper is cut, it is rewound automatically.
Cutting the Leading Edge of Roll Paper Automatically
If the leading edge of a roll is crooked or warped, it may cause an error message or printing problems. In this case, set  Trim
Edge First  to Automatic  or On  on the Control Panel to have the printer cut the leading edge to make the...

•On
The  leading  edge  is  cut  off  when  you  load  a  roll,  and  scraps  are  removed.  The  amount  of  paper  cut  from  the  leadingedge  varies  depending  on  the  type  of  paper.  For  more  information,  see  the  Paper  Reference  Guide.    (See  "Types  of
Paper .")
→P.768
Note•By default, the setting varies depending on the type of paper. For more information, see the Paper Reference
Guide.   (See "Types of Paper .")
→P.768
• For  paper  of  irregular  widths,  setting...

Reducing Dust from Cutting RollsFor media such as Backlit Film that are more likely to generate debris when cut, select  CutDustReduct. > On  in the  Paper
Menu  of the Control Panel. This option reduces debris from cutting by printing black lines at the leading and trailing edges
of documents. It may help prevent Printhead damage. You can specify for  CutDustReduct. to be activated for particular
types of paper.Important• Do  not  set  CutDustReduct.   to On  for  paper  that  wrinkles  easily,  such...

Handling sheets
Loading Sheets in the Printer .......................................................................................................................... 802
 
Printing From a Desired Starting Point ............................................................................................................ 806
 
Removing Sheets ............................................................................................................................................ 810
 
Loading Sheets in...