Home > Canon > Printer > Canon Imageprograf Ipf815 User Guide

Canon Imageprograf Ipf815 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Imageprograf Ipf815 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 960
    							Printer Specifications
    Specifications .................................................................................................................................................. 765
    Print Area ........................................................................................................................................................ 768Specifications
    Important
    • The following values may vary depending on the operating environment. Printer
    Power supply
    100–120 V AC (50/60 Hz), 220–240 V
    AC (50/60 Hz)Power consumption
    During operation 190 W max.
    Sleep mode 100–120 V: 5 W max.
    220–240 V: 6 W max.
    Off 1 W max. (*1 →P.765
    ) Operating noise
    During operation Approx. 52 dB (A) max. (6.8 bels or
    less)
    Standby Approx. 35 dB (A) max.Operating environment
    Temperature 15–30°C (59–86°F)
    Humidity 10–80%, non-condensing
    Dimensions (W × D × H) Printer and Stand (including Roll
    Holder and Stationary Output Stack-
    er ) 1,893 ×975×1,144 mm (74.5 × 38.4 ×
    45.0 in)
    Weight Printer and Stand (not including the
    Printhead and Ink Tank ) Approx. 138 kg (304.2 lb)
    Space for installation (W × D × H) Printer and Stand (not including the Printhead and Ink Tank ) 2,293×1675×1,500 mm (90.3 × 65.9 ×
    59.1 in)
    Applicable standards International Energy Star Program, Law
    on Promoting Green Purchasing, GPN,
    RoHS, Eco Declaration, WEEE, U.S.
    presidential directives*1: The printer uses a trace amount of power even when turned off. To stop all power consumption, turn off the
    printer and unplug the power cord. Printing performance
    Print method
    Bubblejet
    Maximum resolution 2400 dpi horizontally (*1 →P.765
    ) × 1200 dpi vertically
    Printhead PF-03
    Number of nozzles MBK: 5,120; Others: 2,560 each color*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets. Printer Parts > Printer Specifications >
    iPF815
    Specifications 9
    765
     
    						
    							Interface
    USB
    2.0(*1
    →P.766
    )Format
    Internal port
    Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
    Connector Series B (4-pin)Ethernet
    FormatInternal port
    Specification IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/Auto-Negotia- tion, IEEE 802.3x Full Duplex
    Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP, TCP/IP, AppleTalk, HTTP*1: Use in USB 2.0 High Speed mode requires the following environment:
    •Computer: USB 2.0 High-Speed–compatible
    • Operating 
    system: Windows 2000/Windows XP/Windows Server 2003/WindowsVista /Windows Server 2008/
    Windows 7 or Mac OS X ver. 10.3.9 or later
    • USB 2.0 driver: Microsoft USB 2.0 driver (available from Windows Update or the Service Pack.)
    • USB cable: Certified USB 2.0 cable Ink
    Ink Tank
    MBK Ink Tank ( Matte Black
    Ink, or black ink for matte paper) Pigment ink
    PFI-303MBK (330 ml [11.2 fl
    oz]) or PFI-703MBK (700 ml
    [23.7 fl oz])
    BK Ink Tank ( Black Ink ) Dye ink PFI-303BK (330 ml [11.2 fl oz])
    or PFI-703BK (700 ml [23.7 fl
    oz])
    C Ink Tank ( Cyan Ink ) Dye inkPFI-303C (330 ml [11.2 fl oz]) or
    PFI-703C (700 ml [23.7 fl oz])
    M Ink Tank ( Magenta Ink ) Dye ink PFI-303M (330 ml [11.2 fl oz])
    or PFI-703M (700 ml [23.7 fl
    oz])
    Y Ink Tank ( Yellow Ink ) Dye ink PFI-303Y (330 ml [11.2 fl oz]) or
    PFI-703Y (700 ml [23.7 fl oz])
    Capacity 330 or 700 ml (11.2 or 23.7 fl oz)
    per color (*1 →P.766
    ) *1: The provided Starter Ink Tanks contain 330 ml (11.2 fl oz) each.
    Paper
    For information on the types of paper the printer supports, refer to the Paper Reference Guide.   (See "Types of Paper.")→P.617
    Paper width
    Rolls254–1,117.6 mm (10–44 in)
    Sheets 203–1,117.6 mm (8–44 in)Length of one page Rolls
    203 (*1 →P.767
    )–18,000 mm (8–708.7 in)
    Sheets 203–1,600 mm (8–63 in)Thickness
    Rolls0.07–0.8 mm (0.0028–0.031 in)
    Sheets 0.07–0.8 mm (0.0028–0.031 in)Printer Parts 
    > Printer Specifications >
    Specifications
    iPF8159
    766
     
    						
    							Paper Size
    Roll width44-in. Roll (1117.6mm), 42-in. Roll (1066.8mm), JIS B0/B1 Roll
    (1030.0mm), 36-in. Roll (914.4mm), ISO A0/A1 Roll (841.0mm),
    30-in. Roll (762.0mm), JIS B1/B2 Roll (728.0mm), 24-in. Roll
    (609.6mm), ISO A1/A2 Roll (594.0mm), JIS B2/B3 Roll
    (515.0mm), 17-in. Roll (431.8mm), ISO A2/A3 Roll (420.0mm), 16-
    in. Roll (406.4mm), 14-in. Roll (355.6mm), ISO A3/A4 Roll
    (297.0mm), 10-in. Roll (254.0mm)
    Sheets ISO A0, ISO A1, ISO A2, ISO A2+, ISO A3, ISO A3+ , ISO A4,
    ISO B0, ISO B1, ISO B2, ISO B3 , ISO B4, JIS B0, JIS B1, JIS B2,
    JIS B3, JIS B4 , 34"x44" (ANSI E) , 28"x40" (ANSI F),
    22"x34"(ANSI D) , 17"x22"(ANSI C) , 13"x19" (Super B) , 11"x17"
    (Ledger), Legal (8.5"x14"), Letter (8.5"x11"), 36"x48" (ARCH E),
    30"x42" (ARCH E1) , 26"x38" (ARCH E2), 27"x39" (ARCH E3) ,
    24"x36" (ARCH D) , 18"x24" (ARCH C) , 12"x18" (ARCH B),
    9"x12" (ARCH A) , DIN C0, DIN C1, DIN C2 , DIN C3, DIN C4,
    20"x24", 18"x22" , 14"x17", 12"x16", 10"x12" , 10"x15", 8"x10",
    US Photo 16"x20" , Poster 20"x30", Poster 30"x40", Poster
    42"x60", Poster 44"x62", 13"x22" , Poster 300x900mmPrint area
    Normal sizePrintable area
    • Rolls
    3 mm (0.12 in) from each side
    • Sheets
    3 
    mm (0.12 in) from the top, 23 mm (0.91 in) from the bottom, and
    3mm (0.12 in) from the left and right sides
    For information on the recommended print area,  see "Print Area." →P.768
    Borderless printing
    (*2 →P.767
    ) Printable area (rolls)
    0 mm from the top, 0 from the bottom, and 0 mm from the left and
    right sides
    Supported width for borderless printing 42-in. Roll (1066.8mm), JIS B0/B1 Roll (1030.0mm), 36-in. Roll
    (914.4mm), ISO A0/A1 Roll (841.0mm), 24-in. Roll (609.6mm),
    ISO A1/A2 Roll (594.0mm), JIS B2/B3 Roll (515.0mm), 17-in. Roll
    (431.8mm), 14-in. Roll (355.6mm), 10-in. Roll (254.0mm) *1: When supplying paper, use a roll approximately 1,000 mm (1,093.6 yd) or longer.
    *2: Printing may not be possible in some cases, depending on the type and size of paper.
    Hard Disk
    Hard disk capacity
    160 GB (print job storage capacity: 92
    GB)Print job storage capacity
    Common Box100 jobs
    Personal Boxes 100 jobsOptions
    Media Take-up Unit
    TU-06
    Wheeled Output Stacker BU-03
    Roll Holder Set RH2-44 Printer Parts 
    > Printer Specifications >
    iPF815
    Specifications 9
    767
     
    						
    							Print Area
    A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless print-
    ing, the actual printing area corresponds to the paper size minus the space for this margin. Note
    • Printable Area: The area that can be printed.
    • There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.
    • Recommended Print Area: We recommend printing within this area.
    • To 
    print  so  that  your  original  matches  the  print  area  exactly,  use  an  oversized  paper  size  that  includes  the
    required margin.   (See "Printing on Oversized Paper .") →P.85
     
    Margins of Printable Area
    Margins of Recommended Print Area
    Top Edge Bottom Edge Sides Top Edge Bottom Edge Sides
    Sheets 3 mm (0.12 in) 23 mm (0.91 in)3 mm (0.12 in) 20 mm (0.79
    in) 23 mm (0.91
    in) 5 mm (0.20 in)
    Rolls 0/3 mm (0/0.12 in) 0/3 mm (0/0.12
    in) 0/3 mm
    (0/0.12 in)20 mm (0.79
    in) 5 mm (0.20 in) 5 mm (0.20 in)Sheets
    •
    Printable Area
    a margin of 3 mm (0.12 in) on top, 23 mm (0.91 in) on bottom, and 3 mm (0.12 in) on left and right sides is required.
    •
    Recommended Print Area
    A margin of 20 mm (0.79 in) on top, 23 mm (0.91 in) on bottom, and 5 mm (0.20 in) on left and right sides is required.
    Rolls Printer Parts 
    > Printer Specifications >
    Print Area
    iPF8159
    768
     
    						
    							•
    Printable Area
    A  margin  of  3  mm  (0.12  in)  on  all  sides  is  required.  During  borderless  printing,  the  margin  on  all  sides  is  0  mm.  For
    information  on  paper  compatible  with  borderless  printing,  see  the  Paper  Reference  Guide.    (See  "Types  of  Paper.")→P.617
    •
    Recommended Print Area
    A margin of 20 mm (0.79 in) on top, 5 mm (0.20 in) on bottom, and 5 mm (0.20 in) on left and right sides is required.
    Printer Parts 
    > Printer Specifications >
    iPF815
    Print Area 9
    769
     
    						
    							Network Setting
    Network Setting
    771Network Setting (Windows)
    783Network Setting (Mac OS X)
    793Network Setting >
    iPF81510
    770
     
    						
    							Network Setting
    Network Environment ...................................................................................................................................... 771
     
    Configuring the IP Address on the Printer ....................................................................................................... 773
    Configuring the IP Address Using the Printer Control Panel .......................................................................774
    Configuring the IP Address Using ARP and PING Commands ..................................................................775
     
    Using RemoteUI .............................................................................................................................................. 776
    Configuring the Printer's TCP/IP Network Settings ..................................................................................... 777
    Specifying Printer-Related Information ....................................................................................................... 778
     
    Configuring the Communication Mode Manually
    ............................................................................................. 780
    Email Notification When Printing is Finished or Errors Occur .........................................................................781
    Initializing the Network Settings ...................................................................................................................... 781Network Environment
    System requirements
    The system requirements, which vary depending on your network, are as follows. •
    Printing over a TCP/IP network
    •Compatible operating systems
    •Windows 2000 (Professional or Server)
    • Windows XP (Home Edition or Professional)
    • Windows Server 2003 (Standard Edition)
    • Windows Vista (Home Basic/Business/Ultimate)
    • Windows Server 2008 (Standard Edition or Enterprise Edition)
    • Windows 7
    • Windows XP Professional x64 Edition
    • Windows Server 2003 x64 Edition
    • Windows Vista x64
    • Windows Server 2008 x64
    • Windows 7 x64
    • Mac OS X 10.2.8 or later
    • Unix (Solaris 9)
    • Unix (Red Hat 9)
    • Compatible computer
    •A computer that runs one of the above operating systems Note
    • The imagePROGRAF printer driver is supported in Mac OS X 10.3.9 or later.
    • The imagePROGRAF printer driver is not compatible with Unix. •
    Printing over an AppleTalk network
    •Compatible operating systems Network Setting 
    > Network Setting >
    iPF815
    Network Environment 10
    771
     
    						
    							•
    Mac OS X 10.2.8–10.4
    • Compatible computer
    •A computer that runs one of the above operating systems Note
    • The printer cannot be used over a LocalTalk network.
    • Compatible with EtherTalk Phase 2.
    • The imagePROGRAF printer driver is not compatible with AppleTalk. •
    Printing over a NetWare network
    •Compatible servers
    •Novell NetWare 4.2/5.1/6.0
    • Compatible clients
    •Windows 2000 (Professional or Server)
    • Windows XP (Professional)
    • Compatible computer
    •A computer that runs one of the above operating systems Note
    • In NetWare 6.0, iPrint is not supported. Network Environment
    After confirming what type of network environment you will connect the printer to, set up the printer and computers as
    needed. •
    Example of a Windows network
    In Windows networks, print over TCP/IP. Note
    • NetBIOS is not supported.
    Network Setting > Network Setting >
    Network Environment
    iPF81510
    772
     
    						
    							•
    Example of a Macintosh network
    In Macintosh networks, print over AppleTalk (EtherTalk) or TCP/IP, using Bonjour (Zeroconf) functions.
    Note
    • The imagePROGRAF printer driver is not compatible with AppleTalk. •
    Example of a NetWare network
    Note
    • Even if there is a NetWare server in your network environment, you can use it in conjunction with TCP/
    IP or AppleTalk. In this case, complete the settings for each protocol you will use. Configuring the IP Address on the Printer
    You must configure the printer's IP address before using the printer in a TCP/IP network.
    The printer's IP address is configured automatically when you install the printer driver following the instructions in the Set-
    up Guide.
    Configure the IP address by using imagePROGRAF Device Setup Utility, the printer Control Panel, or ARP or PING com-
    mands, if the IP address is changed, or if you change the printer connection mode to a network connection. For details on
    configuring the IP address, refer to the following topics.
    •Configuring the IP Address Using imagePROGRAF Device Setup Utility →P.404
     (Windows)
    • Configuring the IP Address Using the Printer Control Panel →P.774
    • Configuring the IP Address Using ARP and PING Commands →P.775Network Setting 
    > Network Setting >
    iPF815
    Configuring the IP Address on the Printer 10
    773
     
    						
    							Important
    • If you  use  a  DHCP  server  for  automatic  assignment  of  the  printer's  IP  address,  printing  may  no  longer  be
    possible  after  the  printer  is  turned  off  and  on.  This  is  because  an  IP  address  different  from  before  has  beenassigned.  Thus,  when  using  DHCP  server  functions,  consult  your  network  administrator  and  configure  the
    settings in one of the following ways.
    • Configure the setting for dynamic DNS updating
    In  RemoteUI,  activate  the  setting  Enable  DNS  Dynamic  Update.   (See  " Configuring  the  Printer's  TCP/
    IP Network Settings.") →P.777
    • Configure the setting for assignment of the same IP address each time the printer starts up Note
    • We 
    recommend  configuring  the  printer's  IP  address  even  if  you  will  use  the  printer  in  networks  other  than
    TCP/IP networks. Configuring the printer's IP address enables you to use RemoteUI to configure the network
    settings and manage the printer with a web browser.
    For details on RemoteUI,  see "Using RemoteUI." →P.776
    Configuring the IP Address Using the Printer Control Panel
    This topic describes how to configure the printer's IP address on the Control Panel.
    1. Press the Menu button to display  MAIN MENU.2.
    Press  ▲ or ▼ to select  Interface Setup, and then press the ▶ button.
    3. Press  ▲ or ▼ to select  TCP/IP, and then press the  ▶ button.
    4. Press  ▲ or ▼ to select  IP Setting, and then press the ▶ button.
    5. Press  ▲ or ▼ to select  IP Address, and then press the  ▶ button.
    6. After you press ◀ or ▶ to select the input field, numerical input is possible.
    Network Setting 
    > Network Setting >
    Configuring the IP Address Using the Printer Control Panel
    iPF81510
    774
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Imageprograf Ipf815 User Guide