Canon Imageprograf Ipf815 User Guide
Have a look at the manual Canon Imageprograf Ipf815 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11. Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm). 12. Click OK to close the Information dialog box. 13. In CBorderless Printing Method , click FPrint Image with Actual Size. 14. Confirm the print settings and print as desired. Note • For tips on confirming print settings, see " Confirming Print Settings (Windows) →P.206 " Borderless Printing at Actual Size (Mac OS X) This topic describes how to print borderlessly at actual size based on the following example. •Document: Any Type • Page size: 10 × 12 inches (254.0×304.8 mm)–Borderless • Paper: Roll paper • Paper type: Heavyweight Coated Paper • Roll paper width: 10 inches (254.0 mm) Enhanced Printing Options > Printing at full size > iPF815 Borderless Printing at Actual Size (Mac OS X) 3 95
1. This sets the BFormat for and CPaper Size. Note • The configuration method varies depending on the OS and application software you are using. If Page Setup is displayed in the application menu, the settings are configured by opening the Page Attributes dialog box from Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when you select Print from the application software menu. 2. Select the printer in the APrinter list. 3. In the FPaper Size list, choose a paper size supported for borderless printing. Here, click 10"x12" - Borderless.Note • Paper sizes supported for borderless printing are indicated by —Borderless. 4. If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and then select Print from the application software menu. Enhanced Printing Options > Printing at full size > Borderless Printing at Actual Size (Mac OS X) iPF8153 96
5. Access the Main pane.6. In the AMedia Type list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper. 7. Make your selection in the EPrint Target list. 8. Make your selection in the FPrint Quality list. 9. Access the Page Setup pane. 10. Select and click a roll paper in the APaper Source list. Enhanced Printing Options > Printing at full size > iPF815 Borderless Printing at Actual Size (Mac OS X) 3 97
11. Confirm that the roll paper width matches the paper size. Make sure the width of the loaded roll is displayed in the BRoll Width list—in this case, 10 in. (254.0mm). Note • If the width of the roll loaded in the printer is not shown in BRoll Width , click LPrinter Informa- tion on the Main pane to update the printer information. 12. Make sure the CPage Size setting matches the original size as selected in CPaper Size in the Page Attributes dialog box—in this case, 10"x12" - Borderless.Enhanced Printing Options > Printing at full size > Borderless Printing at Actual Size (Mac OS X) iPF8153 98
13. Confirm the print settings, and then click MPrint to start printing. Note • For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.429 " Enhanced Printing Options > Printing at full size > iPF815 Borderless Printing at Actual Size (Mac OS X) 3 99
Borderless Printing Borderless Printing on Paper of Equivalent Size ............................................................................................. 100 Borderless Printing by Resizing Originals to Match the Paper Size (Windows) ..........................................101 Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) ........................................103 Borderless Printing by Resizing Originals to Fit the Roll Width .......................................................................107 Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) .................................................108 Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X) ...............................................110 Borderless Printing on Paper of Equivalent Size Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) without a surrounding margin, or border. Borderless Printing In regular printing, a margin required by the printer is added around the original. With borderless printing, you can print documents without the margin, so that the printed image covers the entire surface of the paper. Important • Borderless printing is only available with rolls. • Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular widths. For information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (Refer to "Types of Paper →P.617 ") • Paper incompatible with the printer's auto cut function can be printed without borders on the left and right sides only. • These features cannot be used in combination with borderless printing: special page layouts, centering origi- nals, and printing cut lines on rolls. • If Fit Paper Size or Print Image with Actual Size (Windows only) is selected when performing borderless printing, Rotate Page 90 degrees (Conserve Paper) cannot be selected. • When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be slightly uneven at the edges. If you require higher image quality, specify No in Auto Cut in the printer driv- er. In this case, the paper can be printed without borders on the left and right sides only. Cut the printed docu- ment ejected from the printer, then use scissors to cut away the edges on the top and bottom. • By factory default, the ink drying time is disabled for all paper. When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit touches printing surfaces that are not dry yet, it may damage the paper or the edge of the document that is cut, depending on frequency of use. In this case, follow these steps to change the ink drying time. 1. On the Main sheet of the printer driver, click Settings in Media Type. 2. Select the ink drying time in the Between Pages list of Drying Time . • Before borderless printing, make sure the blue Switch on the platen is set toward the ● side. (See "Setting the Blue Switch on the Platen.") →P.872 Borderless Printing Method Choose the method of borderless printing that suits the original, as desired. Enhanced Printing Options > Borderless Printing > Borderless Printing on Paper of Equivalent Size iPF8153 100
Fit Paper Size Enlarge or reduce the original to match the size of the paper you are using. Note • The printer driver automatically enlarges originals 3 mm (0.12 in) past the dimensions of the paper on each side. The 3 mm portion beyond the edge on each side is not printed. For instructions on borderless printing of photos, images, and other documents to match the paper size, refer to the follow- ing topics, as appropriate for your computer and operating system. •Borderless Printing by Resizing Originals to Match the Paper Size (Windows) →P.101 • Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) →P.103 Borderless Printing by Resizing Originals to Match the Paper Size (Windows) This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following example. •Document: Any type • Page size: 10×12 inches (254.0×304.8 mm) • Paper: Roll • Paper type: Heavyweight Coated Paper • Roll paper width: 10 inches (254.0 mm) 1. In the application, create an original that takes up the entire space of the paper size. Note • If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on specifying the margin, refer to the software documentation. 2. Choose Print in the application menu. 3. Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv- er Dialog Box from Applications (Windows) →P.211 ") Enhanced Printing Options > Borderless Printing > iPF815 Borderless Printing by Resizing Originals to Match the Paper Size (Windows) 3 101
4. Make sure the Main sheet is displayed. 5. In the AMedia Type list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper. 6. Select the print target in the EPrint Target list. 7. Click the Page Setup tab to display the Page Setup sheet.Enhanced Printing Options > Borderless Printing > Borderless Printing by Resizing Originals to Match the Paper Size (Windows) iPF8153 102
8. In the APage Size list, click the size of the original as specified in the application. In this case, click 10"x12". 9. Select and click a roll paper in the LPaper Source list. 10. Select the BBorderless Printing check box to display the Information dialog box.11. Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm). 12. Click OK to close the Information dialog box. 13. In CBorderless Printing Method, click DFit Paper Size . 14. Click Match Page Size in the GPaper Size list. 15. Confirm the print settings and print as desired. Note • For tips on confirming print settings, see " Confirming Print Settings (Windows) →P.206 " Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following example. •Document: Any Type • Page size: 10×12 inches (254.0×304.8 mm) Enhanced Printing Options > Borderless Printing > iPF815 Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) 3 103
• Paper: Roll paper • Paper type: Heavyweight Coated Paper • Roll paper width: 10 inches (254.0 mm) 1. This sets the BFormat for and CPaper Size. Note • The configuration method varies depending on the OS and application software you are using. If Page Setup is displayed in the application menu, the settings are configured by opening the Page Attributes dialog box from Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when you select Print from the application software menu. 2. Select the printer in the APrinter list. 3. In the FPaper Size list, click the size of the original. In this case, click 10"x12".Note • All sizes are available in borderless printing if you resize originals to match the paper size. 4. If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and then select Print from the application software menu. Enhanced Printing Options > Borderless Printing > Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) iPF8153 104