Canon Imageprograf Ipf815 User Guide

2.
Keeping  the right edge of the paper aligned with the extended line of the Paper Alignment Line (a) on the right side
of the printer, load the paper so that the near edge is aligned with the groove (b) at the far end of the Platen.
In  this  case,  advance  the  paper  as  far  into  the  paper  feed  slot  as  possible  because  it  will  be  printed  starting  at  that
position. 3.
Lower the Release Lever and close the Top Cover.
4. If 

no  print  job  has  been  received  from  the  computer,...

Note
• If a print job received requires paper larger than the selected paper, it may soil the Platen. Removing Sheets
Remove sheets from the printer as follows.
1. Press the Load/Eject button. Note
• Paper cannot be ejected by using the  Load/Eject button when print jobs are in progress or during the
ink  drying  period.  Before  ejecting  paper,  press  the  Stop  button  to  cancel  printing,  print  job  process-
ing, or ink drying.
2. Press the OK  button to eject the paper. The paper is ejected from...

3.
As you hold the sheet, lift the Release Lever and remove the sheet. 4.
Lower the Release Lever. Handling Paper > Handling sheets >
iPF815
Removing Sheets 7
657
 

Output Stacker
Stationary Output Stacker ............................................................................................................................... 658
Using the Stationary Output Stacker ............................................................................................................... 659
Stowing the Stationary Output Stacker ........................................................................................................... 661
 
Wheeled Output Stacker...

e.
Basket Rod
Keeps Basket Arm R and Basket Arm L at the same angle.
f.
Rear Holder
Holds the middle of the Basket Rod (cord side).
 (See "Using the Stationary Output Stacker .") →P.659
Note
• The printer can be used with either a Stationary Output Stacker or a separate, mobile Wheeled Output Stack-
er.
The Stationary Output Stacker is normally provided as the standard stacker, but the Wheeled Output Stackermay  be  the  standard  stacker  in  some  sales  regions.  If  the  Wheeled  Output...

•
When the Media Take-up Unit is used, or when the Output Stacker is stored for long periods
Lower it to position (3) for storage. 
 (See "Stowing the Stationary Output Stacker.") →P.661
When 
using  the  Output  Stacker  again  after  storage,  reattach  the  Basket  Rod  on  the  front  of  the  Output  Stacker  to  the
tips of the left and right basket arms and pull the side rods out completely. •
When printing on large, stiff sheets
Use position (3). Important
• When 
storing  printed...

Stowing the Stationary Output Stacker
Stow the Stationary Output Stacker if you will use the Media Take-up Unit or if you will not use the Stationary Output
Stacker for an extended period.
1. When 
the Output Stacker is in the position used when storing printed documents (a), lift the front Basket Rod gently
to release the lock, lower the stacker toward the front (b), and push it all the way back. 2.
Remove 
 the front Basket Rod from the left and right Basket Arms. Roll up the Basket Cloth and put it at...

Important
• When using  the  optional  Media  Take-up  Unit,  position  the  Basket  Cloth  and  Basket  Rod  so  they  do
not interfere with the Media Take-up Sensor (indicated by the dashed line). 3.
Push in the left and right Basket Arm toward the back all the way, until they stop. Handling Paper 
> Output Stacker >
Stowing the Stationary Output Stacker
iPF8157
662
 

Wheeled Output Stacker
An output stacker with casters, positioned in front of the printer. a.
Output Stacker
A cloth tray that catches ejected documents.
The Output Stacker can be opened and closed using the rod in front. b.
Output Stacker Ejection Guides
Prevent printed documents from winding around the Roll Holder or being drawn into the Paper Feed Slot.
Hold the Wheeled Output Stacker by these guides when moving it. c.
Output Stacker Foot Stand
Equipped with casters to facilitate moving it.
d....

Positioning the Wheeled Output Stacker by the printer
1. Holding the Output Stacker Ejection Guides (a), move the stacker between the printer Stand. 2.
Lock the casters. Handling Paper > Output Stacker >
Using the Wheeled Output Stacker
iPF8157
664