Canon Imageprograf Ipf815 User Guide

•
Display of printer-related information
Job Mgmt Menu •Job management menu operations
For a description of specific items available in the main menu during printing,  see "Main Menu Settings (During Print-
ing)." →P.734
For instructions on selecting and setting main menu items during printing,  see "Main Menu Operations." →P.705
Submenu operations
Access submenus by pressing the Information button on the Control Panel. You can check the following information in
submenus.
•Remaining...

Simply press buttons on the Control Panel to access various function menus from the main menu and set or execute menu
items.
The following section describes menu operations and how they are presented in this 
User Manual.
• Accessing menus →P.706
• Specifying menu items →P.707
• Specifying numerical values →P.707
• Executing menu commands →P.708
Accessing menus
Printer menus are grouped by function.
Menus are displayed with the upper line selected. Use the buttons on the Control Panel to access each...

•
Upper level menus are available if  ◀ is displayed at left in the top line. To access these upper level menus, press  ◀.Specifying menu items
Follow these steps to specify menu items.
1. Press  ▲ or ▼ to select a menu, and then press the  ▶ button.
Repeat these steps until the desired menu options are displayed.
2. Press ▲ or ▼ to select a setting item to complete, and then press the  OK button.
The check box at left is selected, and the setting is confirmed. After two seconds, the display reverts to...

2.
Press ▲ or ▼ to select  TCP/IP, and then press the  ▶ button.
3. Press ▲ or ▼ to select  IP Setting, and then press the  ▶ button.
4. Press ▲ or ▼ to select  IP Address, and then press the ▶ button.
5. Press  ◀ or ▶ to move the cursor (_) to each field for entering numbers. 6.
Press  ▲ or ▼ to enter the number, and then press the  OK button.Note
• Hold down ▲ or ▼ to increase or decrease the value continuously.
• Make 
sure the IP address you enter for the printer is not the same as any computer IP...

2.
Press ▲ or ▼ to select a setting item to execute, and then press the  OK button.After two seconds, the menu command is executed. After commands are executed, in most cases the printer reverts
to the state before the menu operation, either online or offline. Menu Structure
Main Menu
The structure of the main menu is as follows. Values at right indicated by an asterisk * are the defaults.
For instructions on menu operations,  see "Main Menu Operations." →P.705
For details on menu items,  see...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Take-up
Reel
(*9
→P.721
) Disable *
Enable Paper
Menu
Cut Sheet
Type(The paper type is displayed here.) (
*5 →P.720
)
Roll Me-
dia Type
(*1 →P.720
) (The paper type is displayed here.) (
*5 →P.720
) Roll
Length Set
(*1
→P.720
),
(*2 →P.720
) ##.# m
### feet (*13 →P.721
) ManageR-
emainRoll
Off *
On Paper De-
tails (The paper
type is dis-
played
here.)
(*5
→P.720
) Roll Dry-
ingTime
Off
30 sec.
1 min.
3...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Paper De-
tails (The paper
type is dis-
played
here.)
(*5
→P.720
) Adjust
Length A
From –0.70% to 0.70%
Adjust
Length B From –0.70% to 0.70% Head
Height
Automatic *
Highest
High
Standard
Low
Lowest Skew
Check Lv.
Standard *
Loose
Off Vac-
uumStrng
th
Automatic *
Strongest
Strong
Standard
Weak
Weakest Width De-
tection
Off
On * NearEnd
RollMrgn
3mm
20mm Cut Speed Fast
Standard
Slow Trim Edge
First...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Paper De-
tails (The paper
type is dis-
played
here.)
(*5
→P.720
) Return
Defaults
No
Yes Job Man-
agement Print Job Job List (Choose a
print job.)
Delete
Preempt Jobs Stored Job Mailbox
List (Enter a
password if
one has
been set.) Job List Print
Delete Print Job
List
No
Yes Job Log (Choose
from infor-
mation
about the
latest three
print jobs.)
Document Name
User Name
Page Count Job Status OK
CANCELED...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level GL2 Set-
tings Quality
Manager Color
Mode
Color (CAD) 5
Color (CAD) 6 Print
Quality
Fast
Standard *
High Input Res-
olution
600dpi *
300dpi Print
(Econo-
my)
Off *
On Paper
Manager Paper
Source
Automatic *
Roll Paper
Cut Sheet Margin 3mm(Standard) *
5mm Conserve
Paper
Off *
On Auto Ro-
tate
Off *
On Nesting Use Nest-
ing
Off *
On
Nesting
WaitTime xx min. Cut Lines Off *
On Line &
Pen Man-
ager Enable...

First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level GL2 Set-
tings Line &
Pen Man-
ager Pen Setup Define Pa-
lette
Palette B
(Select the
pen num-
ber)(Indicates
Width,
Color, and
Line At-
tributes )(Specify the
values of
Width, Color,
and Line At-
tributes )
Factory (Select the
pen num-
ber)(Indicates 
Width, Color , and
Line Attributes ) Reset Pa-
lette
All Palette
Palette A
Palette B Smoothing Software *
Smooth Thicken-
FineLines
Off *
On Adjust-...