Canon Imageprograf Ipf815 User Guide

1.
Press the Load/Eject  button.
A confirmation message is displayed regarding removal of the roll. 2.
Press the OK button.
The roll can now be removed.
3. Open the Top Cover and lift the Ejection Guide. 4.
Using both hands, rotate the Roll Holder in the direction of the arrow to rewind the roll. Handling Paper > Handling rolls >
iPF815
Removing the Roll from the Printer 7
635
 

5.
Remove the Roll Holder from the Roll Holder Slot. Note
• For instructions  on  removing  the  Roll  Holder  from  rolls,  see  "Removing  the  Roll  Holder  from
Rolls ." →P.637
6. Lower the Ejection Guide and close the Top Cover. Note
• To load new paper in the printer at this point,  see "Loading Rolls in the Printer." →P.628
Handling Paper 
> Handling rolls >
Removing the Roll from the Printer
iPF8157
636
 

Removing the Roll Holder from Rolls
1. Lift 
the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at the position indica-
ted (b), remove it from the Roll Holder. 2.
Remove the Roll Holder from the roll. 3.
When removing attachments, push the tips (a) in as you remove the attachment.
•3-Inch Paper Core Attachment #1 ( Roll Holder side) Handling Paper 
> Handling rolls >
iPF815
Removing the Roll Holder from Rolls 7
637
 

•
3-Inch Paper Core Attachment #2 ( Holder Stopper side) •
2-Inch Paper Core Attachment Important
• Store the roll in the original bag or box, away from high temperature, humidity, and direct sunlight. If paper
is  not  stored  properly,  the  printing  surface  may  become  scratched,  which  may  affect  the  printing  qualitywhen you use it again. Feeding Roll Paper Manually
When the printer is offline, you can advance or retract the roll on the Platen by pressing 
▲ or ▼.1.
Press the Online button to...

3.
Press the ▲ or ▼  button to advance or retract the roll.
Press ▲ to retract the roll manually.
Press ▼ to advance the roll manually. Note
• Holding down ▲ or ▼ for less than a second moves the roll about 1 mm (0.04 in).
Holding down  ▲ 
or ▼ for more than a second moves the roll until you release the button. Release the button
when the Display Screen indicates " End of paper feed. Cannot feed paper more.".Keeping Track of the Amount of Roll Paper Left
If you have activated automatic monitoring...

Specifying the Ink Drying Time for Rolls
When you are using paper that takes longer for ink to adhere, if the Cutter touches printed surfaces that are still wet, it may
damage the paper or cause rough cut edges. Also, ink may be transferred onto the paper surface during ejection, soiling it.
You can prevent problems by adjusting the drying time after printing before the paper is cut. Windows
1. Display the printer driver dialog box.
 (See "Accessing the Printer Driver Dialog Box from the Operating...

3.
In the  Paper  Detailed  Settings   dialog  box  displayed  next,  select  the  desired  settings  values  in  BBetween  Pages
and  CBetween Scans in  ADrying Time, and then click  OK.
 (See "Paper Detailed Settings Dialog Box (Windows) .") →P.219
Mac OS X
1. Choose Print in the application menu.
2. Select the  Main pane and click  CSettings in  AMedia Type . Handling Paper 
> Handling rolls >
iPF815
Specifying the Ink Drying Time for Rolls 7
641
 

3.
In the  Paper  Detailed  Settings   dialog  box  displayed  next,  select  the  desired  settings  values  in  CBetween  Pages
and  DBetween Scans in  BDrying Time, and then click  OK.
 (See "Paper Detailed Settings Dialog Box (Mac OS X) .") →P.438
Note
• By factory default,  Drying Time is deactivated (  Off ) for all paper types.
• To 

have the printer wait for ink to dry immediately after printing without releasing paper, set  Cutting Mode
to Eject in the printer menu.  (See...

Cutting Method
Menu SettingsDriver Setting
Man-
ual →P.644
 (See "Cutting Roll Paper After Printing
.")→P.196 Cutting
Mode Auto Cut
Manual No Yes
Print Cut
Guideline
Paper
Cut-
ting →P.646
Choose this option if you want to cut pages by
pressing Cutter Unit buttons for manual cutting
after printing when the printer driver is config-
ured to Auto Cut > No or Print Cut Guideline.
Otherwise choose this option if you want to cut
the roll edge after loading a roll. Paper
Cutting
Yes
No Print
Cut...

3.
Press ▲ or ▼ to select the type of paper, and then press the  ▶ button.
4. Press  ▲ or ▼ to select  Cutting Mode, and then press the  ▶ button.
5. Press ▲ or ▼ to select  Eject, and then press the  OK button.
6. Start printing.
Roll paper is fed to the specified cut position and then automatically stopped.
7. As 
you support the printed document to prevent it from dropping, hold down the  Stop button for at least a second to
cut the roll. Manual (when using media that cannot be cut using the Cutter...