Canon Imageprograf Ipf815 User Guide

3.
Press ▲ or ▼ to select the type of paper, and then press the  ▶ button.
4. Press  ▲ or ▼ to select  Cutting Mode, and then press the  ▶ button.
5. Press ▲ or ▼ to select  Manual, and then press the  OK button.
6. Start printing.
The printer stops advancing the paper after printing.
7. Press the Online button. Roll paper is fed to the specified cut position and then automatically stopped.
8. Cut the roll paper manually with scissors or the like. 9.
Press the Online button. The roll is rewound, and...

Paper Cutting (to have the roll cut at your specified position)
1.
After pressing the  Online button to bring the printer offline, press  ▲ or  ▼ to advance the roll paper to the position
for cutting. 2.
Press the Menu button to display  MAIN MENU.3.
Press ▲ or ▼  to select Paper Cutting, and then press the  ▶ button.
4. Press ▲ or ▼ to select  Yes, and then press the  OK button.
After the roll paper is cut, it is rewound automatically. Caution
• If 
paper  would  be  short  when  cut  at  a  particular...

Cutting the Leading Edge of Roll Paper Automatically
If the leading edge of a roll is crooked or warped, it may cause an error message or printing problems. In this case, set  Trim
Edge First to Automatic or On on the Control Panel to have the printer cut the leading edge to make the edge straight after
you load a roll.
Trim Edge First offers the following options. •
Automatic
If  the  left  and  right  side  of  the  leading  edge  of  the  roll  ((a)  and  (b))  are  uneven  by  40  mm  (1.6  in)  or...

2.
Press ▲ or ▼ to select  Paper Details, and then press the ▶ button.
3. Press  ▲ or ▼ to select the type of paper, and then press the  ▶ button.
4. Press ▲ or ▼  to select Trim Edge First , and then press the ▶ button.
5. Press  ▲ or ▼ to select the desired setting option, and then press the  OK button.
This setting takes effect the next time you load a roll. Reducing Dust from Cutting Rolls
The printer is equipped with a function to  reduce cutting dust for media such as Backlit Film that are more...

5.
Press ▲ or ▼ to select  On, and then press the OK button.
The function to reduce cutting dust is now activated. Roll Holder Set
Load a roll on the roll holder and then load the holder in the printer. The Roll Holder in the Roll Holder Set RH2-44 is for
use with both 2-inch and 3-inch paper cores. Use the correct attachment for the particular paper core.   (See "Attaching the
Roll Holder to Rolls .") →P.623
• Roll Holder Set RH2-44
•Roll Holder (for 2- and 3-inch paper cores) •
Attachments...

Handling sheets
Selecting the Paper Type (Sheet) ................................................................................................................... 650
 
Loading Sheets in the Printer .......................................................................................................................... 651
 
Manually Loading Paper to the Position for Printing ....................................................................................... 654
 
Removing Sheets...

5.
Press the Online  button to bring the printer online.Loading Sheets in the Printer
Note
• For details  on  supported  types  and  sizes  of  paper,  see  Paper  Sizes  or  the  Paper  Reference  Guide.    (See
"Paper Sizes .") →P.620
 (See "Types of Paper.") →P.617
• If 

the Platen is dirty, clean inside the Top Cover before loading paper.   (See "Cleaning Inside the Top Cov-
er.") →P.837
• After 

pressing  the  Load/Eject  button,  you  can  refer  to  instructions  on  the...

Important
• Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts
may damage them. 2.
With 
a  sheet  lengthwise  and  printing-side  up,  insert  it  between  the  Platen  (a)  and  the  Paper  Retainer  (b).  Align  the
edges of the sheet as follows.
1. Align the sheet with the Paper Alignment Line (c) at right.
2. Align the inserted edge of the sheet with the leading edge of the Paper Alignment Line (d), as shown. Handling Paper 
> Handling sheets >...

When inserted, sheets are automatically held by suction against the Platen.
Important
• Load a  sheet  so  that  it  is  parallel  to  the  Paper  Alignment  Line  at  right  (c).  Loading  paper  askew  will
cause an error.
• Warped paper may rub against the Printhead. Straighten paper if it is warped before loading it. Note
• You 
can adjust the strength of suction holding paper against the Platen when the Release Lever is up.
If it is difficult to load paper, press the  ▲ or ▼ button on the Control...

Manually Loading Paper to the Position for Printing
When printing on non-standard sizes of paper or to specify a particular position to start printing, in the printer menu set
Width Detection to Off for the paper used.
Setting Width Detection to Off  will prevent paper from being automatically advanced to the position for printing. In this
case, manually load paper at the position for printing.
Instructions for manually loading paper at the position for printing when  Width Detection is set to Off are as...