Canon I Sensys Mf8540cdn User Guide

Special  Mode P
If  the  printed paper  curls, select .Off
On
Clean the  fixing unit  after a toner cartridge  is  replaced or if  black streaks appear  on  printouts.  
Fixing Unit
Clean the  transfer belt inside the  machine to  prevent  the  print quality  from deteriorating. 
Transfer Belt
Clean the  feeder rollers if  documents become dirty  after being fed through the  feeder.  
Feeder
    Select  or  
 Prints  on  envelopes with normal fixing power.
Prints  on  envelopes with fixing power stronger...

0ALJ-0C7
System Management Settings
All  the  settings about  System Management Settings are  listed with short descriptions. Default  settings are
marked with a dagger ().
NOTE
Asterisks ( )
Settings marked with " " are  only available for  the  MF8580Cdw  / MF8550Cdn / MF8280Cw.
Settings marked with " " have different  defaults depending on  the  country or region  of purchase.
Settings marked with " " cannot  be imported or exported via  the  Remote  UI.
Settings marked with...

System Manager Name
Enter up  to  32 alphanumeric  characters  for  the  name of an  Administrator.
Enter up  to  32 alphanumeric  characters  for  the  name and  the  installation  location to  identify the  machine. Device Name
Location
Select whether  to  use the  Department  ID Management,  a feature that  uses IDs  as user  accounts to  specify  access privileges and
maintain information  on  how the  machine is  used. 
Setting the Department  ID Management
Off
On
Enable or disable settings for...

Use IPSec 
Select whether  to  perform  encrypted  communication by establishing a virtual private network (VPN)  via  IPSec. Configuring  IPSec
Settings
Off
On
IPv4 Address Filter 
Enable or disable settings for  filtering  packets  sent to  or received from devices with specified IPv4  addresses.  Specifying IP
Addresses  for Firewall  Rules
Outbound Filter Off
On
Inbound Filter Off
On
IPv6 Address Filter 
Enable or disable settings for  filtering  packets  sent to  or received from devices with...

MAC  Address Filter 
Enable or disable settings for  filtering  packets  sent to  or received from devices with specified MAC addresses.  Specifying MAC
Addresses  for Firewall  Rules
Outbound Filter Off
On
Inbound Filter Off
On
Specify settings for  sending or receiving faxes.
Fax Settings
Specify the  communication start speed settings and  the  R -key  settings.
TX  Start  Speed  
Adjust the  communication start speed.  This adjustment  should be made  when it takes  a long time  to  start sending a...

R-Key  Setting 
If  your machine is  connected through a PBX (Private  Branch Exchange), it is  necessary  to  set the  access method. You  can set the
PBX type to    or .  If  you register  the  outside line  access number to  the  R -key, you can easily  access the
outside line.PSTN
PBX Prefix
Hooking
Memory  Lock  Settings
Select whether  to  store  received faxes without immediately  printing them. Stored  fax  documents can be printed at any time  by
changing  the  setting to  . Storing  Received...

Ireland (IE)
Italy (IT)
Jordan (JO)
Luxembourg (LU)Ukraine  (UA)
Great  Britain (GB)
Other
Select whether  to  forward  all the  received fax  documents to  a specified destination. In addition to  a fax  number,  you can also   specify  an
e-mail address or a shared  folder in a computer  as the  forwarding destination. 
Forwarding All the Received Documents
Automatically
Off
On
When    is  set to  , specify  settings for  printing or storing  forwarded fax  documents in memory.
Print Images
Select...

Specify a PIN  and  require entering  it to  add  new entries to  or edit existing entries in the  Address Book.  Setting a PIN for
Address Book
Restrict  New Destinations
Select whether  to  limit the  fax  numbers  and  e-mail addresses that  can be specified as destinations to  those already  registered in the
Address Book.  Limiting Available Destinations
Off
On
Allow Fax Driver TX
Enable or disable PC faxing (sending faxes from a computer). Prohibiting PC Faxing (MF8580Cdw  / MF8550Cdn / MF8280Cw...

Enable or disable the  USB  port that  is  used for  connecting the  machine to  a computer. Restricting the USB Connection with a
Computer
Off
On
Select whether  to  permit storing  scanned documents into a USB  memory  device. Restricting the Scan to USB Function
Off
On
Select whether  to  permit printing data from a USB  memory  device when it is  attached to  the  machine. Restricting the USB Print
Function
Off
On
Enable or disable the  Product Extended Survey Program (a program for  the  machine...

Enable or disable Secure Print.  Printing via Secure Print
Off
On
Secure Print  Deletion Time 10 to  30 to  240 (min.)
Select a page description language so that  the  machine is  detected as a printer that  is  compatible  with that  language when it is
connected to  a computer  by using Plug and  Play. MF Driver  Installation  Guide
Network
Select a page description language so that  the  machine is  detected as a printer that  is  compatible  with that  language when it is
detected over the  network....