Home > Canon > Printer > Canon I Sensys Mf8280cw User Guide

Canon I Sensys Mf8280cw User Guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Canon I Sensys Mf8280cw User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 750
    Add page 371 to Favourites
    image text
    Enable zoom 
    							0ALJ-08S
Configuring Ethernet Settings
Ethernet is  a standard for  communicating data in a local area network (LAN). You  can set the  communication
mode (half -duplex/full -duplex)  and  the  Ethernet type (10BASE-T/100BASE-TX). In general, the  machine can
be used without changing  the  defaults (
Ethernet Driver  Settings), but you can change these settings to
suit your network environment.
Press  .
Use  / to select ,  and  press  .
If  the  logon screen appears, enter the  correct ID and  PIN  using the  numeric keys, and  then  press .Logging  on  to the
Machine
Select    .
Select whether to configure Ethernet settings  automatically or manually.
Configuring Ethernet settings  automatically
Select , and  press . The machine detects and  automatically sets the  communication mode and  the  Ethernet type that  can
be used.
Configuring Ethernet settings  manually
1Select ,  and  press .
2Select the communication mode.
Select   
select  or  .

Alternately  sends and  receives communication data. Select when the  machine is  connected to  a networking device using
half  duplex.
Simultaneously sends and  receives communication data. Use  this setting for  most environments.
3Select the Ethernet type. Select   
select  or  .
4Press  .
Restart the machine.
Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON.
1
2
3 
4
5
>ß>ã>Ý>Ì>Û>Ì>â>ã>â
    Add page 372 to Favourites
    image text
    Enable zoom 
    							LINKS
Changing the Maximum Transmission  Unit
Setting a Wait Time for Connecting to a Network
>ß>ã>Þ>Ì>Û>Ì>â>ã>â
    Add page 373 to Favourites
    image text
    Enable zoom 
    							0ALJ-08U
Changing the Maximum Transmission Unit
In most Ethernet networks, the  maximum  size of a packet  that  can be sent is  1500  bytes.  A packet  refers to  a chunk  of data into which
the  original  data is  divided before being sent. The maximum  transmission unit  (MTU)  may  vary on  each network. Change  the  settings of
the  machine as necessary. For more information, contact your Network Administrator.
Press  .
Use  / to select ,  and  press  .
If  the  logon screen appears, enter the  correct ID and  PIN  using the  numeric keys, and  then  press.Logging  on  to the
Machine
Select   .
Select the MTU,  and  press  .
Restart the machine.
Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON.
LINKS
Configuring  Ethernet Settings
Setting a Wait Time for Connecting to a Network
1
2
3
4
5
>ß>ã>ß>Ì>Û>Ì>â>ã>â
    Add page 374 to Favourites
    image text
    Enable zoom 
    							0ALJ-08W
Setting a Wait Time for Connecting to a Network
When  a network is  designed to  enjoy  redundant  connectivity with multiple switching hubs  or bridges, it must have a mechanism to
prevent  packets  from looping.  One  effective solution  is  to  define the  role of each switch  port. However, communication may  still be
disrupted  for  several tens of seconds  immediately  after you change the  way  that  network devices are  connected, or if  you add  a new
device. If  this type of problem occurs, set a wait  time  for  connecting to  the  network.
Press  .
Use  / to select ,  and  press  .
If  the  logon screen appears, enter the  correct ID and  PIN  using the  numeric keys, and  then  press .Logging  on  to the
Machine
Select , and  press  .
Enter  the wait  time  in second,  and  press .
Use  /or the  numeric keys to  enter the  time.
Press  .
LINKS
Configuring  Ethernet Settings
Changing the Maximum Transmission  Unit
1
2
3
4
5
>ß>ã>à>Ì>Û>Ì>â>ã>â
    Add page 375 to Favourites
    image text
    Enable zoom 
    							0ALJ-08X
Configuring DNS
DNS (Domain  Name System) provides a service for  name resolution that  associates  a host  (or domain)  name with an  IP  address.
Configure the  DNS, mDNS,  or DHCP option settings as necessary. Note that  the  procedures for  configuring DNS are  different  for  IPv4
and  IPv6.
Start  the Remote UI  and  log  on in System Manager Mode.  Starting Remote UI
Click [Settings/Registration].
Click [Network Settings]  [TCP/IP  Settings].
Configure DNS settings.
Configuring IPv4 DNS
1Click [Edit...] in [IPv4 Settings].
2Configure IPv4  DNS  settings.
1
2
3
4
>ß>ã>á>Ì>Û>Ì>â>ã>â
    Add page 376 to Favourites
    image text
    Enable zoom 
    							[DNS  Settings][Primary DNS  Server Address]
Enter the  IP  address of a DNS server.
[Secondary DNS  Server Address]
Enter the  IP  address of a secondary DNS server, if  any.
[Host Name]
Enter up  to  47 alphanumeric  characters  for  the  host  name of the  machine that  is  to  be registered to  the  DNS server.
[Domain Name]
Enter up  to  47 alphanumeric  characters  for  the  name of the  domain  the  machine belongs to, such as "example.com."
[DNS  Dynamic  Update]
Select the  check  box to  dynamically update  the  DNS records whenever the  machine’s  IP  address is  changed. When
specifying  the  interval  between  updates, enter the  time  in hours in the  [DNS Dynamic Update Interval]  text box.
[mDNS Settings][Use mDNS]
Adopted by Bonjour, mDNS  (multicast DNS) is  a protocol for  associating a host  name with an  IP  address without using
DNS. Select the  check  box to  enable  mDNS  and  enter the  mDNS  name in the  [mDNS  Name] text box.
[DHCP Option Settings][Acquire Host Name]
Select the  check  box to  enable  Option  12 to  obtain the  host  name from the  DHCP server.
[DNS  Dynamic  Update]
Select the  check  box to  enable  Option  81 to  dynamically update  the  DNS records through the  DHCP server.
3Click [OK].
Configuring IPv6 DNS
1Click [Edit...] in [IPv6 Settings].
>ß>ã>â>Ì>Û>Ì>â>ã>â
    Add page 377 to Favourites
    image text
    Enable zoom 
    							2Configure IPv6  DNS  settings.The [Use IPv6]  check  box must be selected to  configure the  settings.  
Setting IPv6  Addresses
[DNS  Settings]
[Primary DNS  Server Address]
Enter the  IP  address of a DNS server. Addresses that  start with "ff"  (or multicast address) cannot  be entered.
[Secondary DNS  Server Address]
Enter the  IP  address of a secondary DNS server, if  any. Addresses that  start with "ff"  (or multicast address) cannot  be
entered.
[Use Same  Host Name/Domain Name  as IPv4]
Select the  check  box to  use the  same host  and  domain  names  as in IPv4.
[Host Name]
Enter up  to  47 alphanumeric  characters  for  the  host  name of the  machine that  is  to  be registered to  the  DNS server.
[Domain Name]
Enter up  to  47 alphanumeric  characters  for  the  name of the  domain  the  machine belongs to, such as "example.com."
[DNS  Dynamic  Update]
Select the  check  box to  dynamically update  the  DNS records whenever the  machine’s  IP  address is  changed. To specify
the  type(s)  of addresses you want to  register  to  the  DNS server, select the  check  box for  [Register Manual Address],
[Register Stateful  Address], or [Register Stateless Address]. To specify  the  interval  between  updates, enter the  time  in
hours in the  [DNS Dynamic Update Interval]  text box.
[mDNS Settings][Use mDNS]
Adopted by Bonjour, mDNS  (multicast DNS) is  a protocol for  associating a host  name with an  IP  address without using
DNS. Select the  check  box to  enable  mDNS.
[Use Same  mDNS Name  as IPv4]
Select the  check  box to  use the  same mDNS  name as in IPv4. To set a different  name,  clear the  check  box and  enter
the  mDNS  name in the  [mDNS  Name] text box.
3Click [OK].
Restart the machine.
Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON.
NOTE
DNS settings can also  be accessed from .IPv4  SettingsIPv6  Settings
5
>ß>ã>ã>Ì>Û>Ì>â>ã>â
    Add page 378 to Favourites
    image text
    Enable zoom 
    							LINKS
Setting IPv4  Address
Setting IPv6  Addresses
Viewing Network Settings
>ß>ã>ä>Ì>Û>Ì>â>ã>â
    Add page 379 to Favourites
    image text
    Enable zoom 
    							0ALJ-08Y
Configuring SMB
Server  Message Block (SMB) is  a protocol for  sharing  resources, such as files  and  printers, with more than
one device in a network. The machine uses SMB to  store  scanned documents into a shared  folder.  Depending
on  your network, you may  have to  set the  NetBIOS  name and  workgroup name.
NetBIOS Name
In a Windows  network that  uses NetBIOS, NetBIOS  names  are  used for  identifying network-connected computers as well as for  file
sharing  and  other network services. Most computers use the  computer  name as the  NetBIOS  name.
Workgroup Name
Workgroup name is  a name for  grouping multiple computers so that  basic  network functions,  such as file sharing, become available in
a Windows  network. Specify the  workgroup name to  identify the  group that  the  machine belongs to.
Start  the Remote UI  and  log  on in System Manager Mode.  Starting Remote UI
Click [Settings/Registration].
Click [Network Settings]  [SMB Settings].
Click [Edit...].
1
2
3
4
>ß>ã>å>Ì>Û>Ì>â>ã>â
    Add page 380 to Favourites
    image text
    Enable zoom 
    							Specify  the required settings  and  click [OK].
[NetBIOS Name]
Enter up  to  15 alphanumeric  characters  for  the  NetBIOS  name of the  machine.
[Workgroup Name]
Enter up  to  15 alphanumeric  characters  for  the  name of the  workgroup that  the  machine belongs to.
IMPORTANT:
NetBIOS  names  or workgroup names  that  start with an  asterisk  (*)  cannot  be registered to  a WINS server.
Restart the machine.
Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON.
LINKS
Configuring  WINS
5
6
>ß>ä>Ü>Ì>Û>Ì>â>ã>â
    All Canon manuals Comments (0)

    Related Manuals for Canon I Sensys Mf8280cw User Guide