Canon I Sensys Mf8280cw User Guide
Have a look at the manual Canon I Sensys Mf8280cw User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 337
Read the License Agreement and click [Yes] to agree.
Check the information displayed for the wireless router.
Write down the necessary information. If you do not know what information is necessary, write down all the information that is
displayed.
NOTE:
If wireless routers are not found
Click [Refresh]. If nothing happens, check that the settings are correctly configured on the computer and the wireless router.
LINKS
Connecting to a Wireless LAN (MF8580Cdw / MF8280Cw Only)...](http://img.usermanuals.tech/thumb/14/56282/w64_canon_i-sensys_mf8280cw-user-guide-336.png "Page 337
Read the License Agreement and click [Yes] to agree.
Check the information displayed for the wireless router.
Write down the necessary information. If you do not know what information is necessary, write down all the information that is
displayed.
NOTE:
If wireless routers are not found
Click [Refresh]. If nothing happens, check that the settings are correctly configured on the computer and the wireless router.
LINKS
Connecting to a Wireless LAN (MF8580Cdw / MF8280Cw Only)...")
![Page 343
Select the [Use IPv6] check box and configure the required settings.
[Use IPv6]
Select the check box to enable IPv6 on the machine. When not using IPv6, clear the check box.
[Stateless Address]
Select the check box when using a stateless address. When not using a stateless address, clear the check box.
[Use Manual Address]
When you want to manually enter an IPv6 address, select the check box and enter the IP address, prefix length, and default
router address in the...](http://img.usermanuals.tech/thumb/14/56282/w64_canon_i-sensys_mf8280cw-user-guide-342.png "Page 343
Select the [Use IPv6] check box and configure the required settings.
[Use IPv6]
Select the check box to enable IPv6 on the machine. When not using IPv6, clear the check box.
[Stateless Address]
Select the check box when using a stateless address. When not using a stateless address, clear the check box.
[Use Manual Address]
When you want to manually enter an IPv6 address, select the check box and enter the IP address, prefix length, and default
router address in the...")
LINKS Setting IPv6 Addresses Viewing Network Settings Configuring WINS >ß>à>Ý>Ì>Û>Ì>â>ã>â
0ALJ-085 Setting IPv6 Addresses The IPv6 addresses of the machine can be configured via the Remote UI. Before setting IPv6 addresses, check the IPv4 address settings (Viewing IPv4 Settings). You need to set the correct IPv4 settings to use IPv6 addresses. Note that the scan function that uses the scanner driver or MF Toolbox is not available in an IPv6 environment. The machine can use up to nine of the following IPv6 addresses: Type Maximum number available Description Link-local address 1An address that is only valid within a subnet or link and cannot be used to communicate with devices beyond a router. A link -local address is automatically set when the IPv6 function of the machine is enabled. Manual address 1An address that is entered manually. When using this address, specify the prefix length and default router address. Stateless address 6An address that is generated automatically using the MAC address of the machine and the network prefix that is advertised by the router. Stateless addresses are discarded when the machine is restarted (or turned ON). Stateful address 1An address obtained from a DHCP server using DHCPv6. Start the Remote UI and log on in System Manager Mode. Starting Remote UI Click [Settings/Registration]. Click [Network Settings] [TCP/IP Settings]. Click [Edit...] in [IPv6 Settings]. 1 2 3 4 >ß>à>Þ>Ì>Û>Ì>â>ã>â
Select the [Use IPv6] check box and configure the required settings. [Use IPv6] Select the check box to enable IPv6 on the machine. When not using IPv6, clear the check box. [Stateless Address] Select the check box when using a stateless address. When not using a stateless address, clear the check box. [Use Manual Address] When you want to manually enter an IPv6 address, select the check box and enter the IP address, prefix length, and default router address in the corresponding text boxes. [IP Address] Enter an IPv6 address. Addresses that start with "ff" (or multicast address) cannot be entered. [Prefix Length] Enter a number that indicates how many bits are available for the network address. [Default Router Address] Specify the IPv6 address of the default router as necessary. Addresses that start with "ff" (or multicast address) cannot be entered. [Use DHCPv6] Select the check box when using a stateful address. When not using DHCPv6, clear the check box. Click [OK]. Restart the machine. Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. 5 6 7 >ß>à>ß>Ì>Û>Ì>â>ã>â
NOTE Checking whether the settings are correct Make sure that the Remote UI screen can be displayed with your computer by using the IPv6 address of the machine. Starting Remote UI Using the operation panel IPv6 settings can also be accessed from .IPv6 Settings LINKS Setting IPv4 Address Viewing Network Settings >ß>à>à>Ì>Û>Ì>â>ã>â
0ALJ-086 Viewing Network Settings Viewing IPv4 Settings Viewing IPv6 Settings Viewing the MAC Address Viewing Wireless LAN Settings and Information (MF8580Cdw / MF8280Cw Only) NOTE The IP address is not correctly configured if it is displayed as "0.0.0.0". Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network You can print a list of the current network settings. User Data List/System Manager Data List (Status Monitor) Select the setting to view (Status Monitor) Select the setting to view Press . Use / to select , and press . If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press .Logging on to the Machine Select , and press . Viewing IPv4 Settings Viewing IPv6 Settings Viewing the MAC Address 1 2 3 >ß>à>á>Ì>Û>Ì>â>ã>â
Press . Use / to select , and press . If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press .Logging on to the Machine Select , and press . If the message is displayed, select , and press . Read the message that is displayed, and press . Select , and press . Select the setting to view, and press . Viewing WEP and WPA/WPA2-PSK information 1Select , and press . 2View the current security settings, and press . If the security settings are not configured, is displayed. 3Select the setting to view, and press . WEP WPA/WPA2- PSK NOTE: and can be viewed from (Status Monitor). Press (Status Monitor) and select the setting to view. LINKS Connecting to a Wireless LAN (MF8580Cdw / MF8280Cw Only) Setting IPv4 Address Setting IPv6 Addresses Configuring DNS Viewing Wireless LAN Settings and Information (MF8580Cdw / MF8280Cw Only) 1 2 3 4 5 6 >ß>à>â>Ì>Û>Ì>â>ã>â
0ALJ-087 Configuring the Machine for Printing or Faxing from a Computer When using the machine as a network printer or a PC-to -fax machine, you can configure the protocols and ports used for printing and create a print server for the machine. Before configuring the machine for printing or faxing from a computer, perform the basic setup procedures, including the printer driver installation (MF Driver Installation Guide). NOTE Printing protocols are rules for delivering document data created on a computer to the machine, and can be selected according to the printing purpose or the network environment. Ports are gateways for passing document data from a computer to the printer. Incorrect port settings are often the cause when documents cannot be printed from a network computer. >ß>à>ã>Ì>Û>Ì>â>ã>â
0ALJ-088 Configuring Printing Protocols and WSD Functions Configure the protocols that are used for printing documents from a networked computer. The protocols supported by the machine include LPD, RAW, and WSD (Web Services on Devices). NOTE To change protocols' port numbers, see Changing Port Numbers. Start the Remote UI and log on in System Manager Mode.Starting Remote UI Click [Settings/Registration]. Click [Network Settings] [TCP/IP Settings]. Configure printing protocols. Configuring LPD or RAW 1Click [Edit...] in [LPD Print Settings] or [RAW Print Settings]. 2Configure the settings as necessary. 1 2 3 4 >ß>à>ä>Ì>Û>Ì>â>ã>â
[Use LPD Printing] Select the check box to print via LPD. When not using LPD printing, clear the check box. [Use RAW Printing] Select the check box to print via RAW. When not using RAW printing, clear the check box. 3Click [OK]. Configuring WSD 1Click [Edit...] in [WSD Settings]. 2Configure the settings as necessary. [Use WSD Printing] Select the check box to print via WSD. When not using WSD printing, clear the check box. [Use WSD Browsing] Select the check box to obtain information about the machine from a computer via WSD. This check box is automatically selected when the [Use WSD Printing] check box is selected. [Use WSD Scanning] Available for Windows Vista/7/8, WSD scanning enables you to scan documents to a computer without installing the scanner driver. Select the check box to scan documents via WSD. When not using WSD scanning, clear the check box. [Use Computer Scanning] Select the check box to use WSD scanning by operating the machine with the operation panel. This check box can only be selected when the [Use WSD Scanning] check box is selected. To perform scanning, press and specify a computer as a scan destination (Scanning from the Machine ). [Use Multicast Discovery] Select the check box to set the machine to reply to multicast discovery messages. If the check box is cleared, the machine stays in sleep mode even when multicast discovery messages are flowing on the network. 3Click [OK]. >ß>à>å>Ì>Û>Ì>â>ã>â
Restart the machine. Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. NOTE Using the operation panel LPD, RAW, and WSD settings can also be accessed from . LPD Print Settings RAW Print Settings WSD Settings Setting up WSD network devices on Windows Vista/7/8 The WSD printer and scanner can be added from the printer folder. Open the printer folder (Displaying the Printer Folder)click [Add a device] or [Add a printer] and follow the on -screen instructions. For more information about how to install MF Drivers for the WSD network printer, see MF Driver Installation Guide. LINKS Configuring Printer Ports 5 >ß>á>Ü>Ì>Û>Ì>â>ã>â