Canon I Sensys Lbp6230dw User Guide

Checking whether the settings  are correct
Make  sure  that  the  Remote  UI screen can be displayed with your computer  by using the  IPv6  address of the  machine.Starting  the Remote  UI
If you change IP addresses after installing the printer  driver
You  need to  add  a new port. Configuring  Printer Ports
LINKS
Setting IPv4  Address
Viewing Network Settings
>ä>Ý>Ì>Û>Ì>Þ>à>Ü
 

0JFC -01W
Viewing Network Settings
Press this machine's   (Paper) key  and  hold it down for  3  seconds  to  print a partial list  of network settings.  This allows  you to  check
IPv4  settings,  the  MAC address, and  wired/wireless LAN settings.  The setting list  is  formatted to  print on  A4  size paper.  Before printing,
load A4  size paper  in the  multi -purpose tray  or manual  feed  slot.  
Loading Paper in the Multi- Purpose TrayLoading Paper in
the Manual Feed Slot
Output example:...

Displays  whether  the  IP  address is  assigned  automatically by a protocol such as DHCP. "On" is  displayed if  automatic
addressing is  enabled.
Select Protocol
Displays  the  protocol used to  assign  the  IP  address automatically.
Auto  IP
Displays  whether  Auto  IP  is  enabled  or disabled.
IP Address
Displays  the  IP  address.
Subnet Mask
Displays  the  subnet  mask.
Gateway Address
Displays  the  gateway address.
The IP  address is  not  correctly configured if  it is  displayed as...

0JFC -01X
Configuring for Printing from a Computer
When  using the  machine as a network printer, you can configure the  protocols and  ports used for  printing.  Before starting, make sure
that  you have completed all basic  preparations  for  printing (Printer Driver  Installation  Guide).
Printing  protocols are  rules for  delivering document data created on  a computer  to  the  machine. You  can select them according
to  the  printing purpose or the  network environment.
Ports  are  gateways for...

0JFC -01Y
Configuring Printing Protocols and Web Services
The following  explains how to  configure printing protocols for  printing documents from computers. The protocols supported by the
machine are  LPD, RAW, and  WSD (Web Services on  Devices).
To change protocol port numbers  Changing Port Numbers
Start  the Remote UI  and  log  on in System Manager Mode.  Starting the Remote UI
Click [Settings/Registration].
Click [Network Settings]  [TCP/IP  Settings].
Configure the printing protocols....

[Use LPD Printing]
Select the  check  box to  print using LPD. Clear the  check  box if  you do not  want to  use LPD  printing.
[Use RAW Printing]
Select the  check  box to  print using RAW. Clear the  check  box if  you do not  want to  use RAW printing.
3Click [OK].
Configuring WSD
1Click [Edit] in [WSD Settings].
2Configure the settings as necessary.
[Use WSD Printing]
Select the  check  box to  print using WSD. Clear the  check  box if  you do not  want to  use WSD printing.
[Use WSD Browsing]...

LINKS
Configuring  Printer Ports
>ä>ã>Ì>Û>Ì>Þ>à>Ü
 

0JFC -020
Configuring Printer Ports
Printing  errors  can occur  when the  print protocol settings of the  machine have been changed, or when a printer has been added via  the
Windows  printer folder.  These errors  are  typically caused by incorrect  printer port settings,  for  example  when a computer  specifies an
incorrect  printer port number or type in the  printer driver. To fix this type of problem,  configure the  printer port settings on  the
computer.
To perform  the  following  procedure,...

Adding a standard TCP/IP  port
1Click [Add  Port].
2Select [Canon MFNP  Port] in [Available  port types] and  click [New Port].
3Select [Auto  Detect] and  select the machine when it is  detected,  and  then  click [Next].
If the machine is  not  detected
Click [Refresh].  If  the  problem persists,  select [IP  address] or [MAC address], enter the  IP  address or MAC
address of the  machine (
Viewing Network Settings) and  then  click [Next].
4Click [Add] [Finish].
5Click [Close].
1Click [Add  Port]....

Changing the port type or number
If  the  printing protocol (LPD or RAW) has been changed on  the  machine side  (Configuring  Printing Protocols and  Web
Services ) or the  port number has been changed (Changing Port Numbers ), the  corresponding settings on  the  computer  must
also  be configured. This operation is  not  needed for  WSD ports.
MFNP port
Standard TCP/IP  port
When  the  next screen is  displayed,  follow  the  instructions on  the  screen.
When  you  select the [Device Type], select...